OSCILLOSCOPES OSCILLOSCOPES 50MHz/30MHz REAL-TIME/DIGITAL STORAGE OSCILLOSCOPE Rear Panel GRS-6052A/6032A FEATURES SPECIFICATIONS * GRS-6052A : DC~50MHz Bandwidth, 100MSa/s, 2kW/CH x 2 GRS-6032A : DC~30MHz Bandwidth, 100MSa/s, 2kW/CH x 2 * Equivalent Time Sampling of 500MSa/s max. * Acquire Mode : Peak Detect, Envelop, Persistence * Pre-Trigger Function 0 ~ 10 div * ROLL Mode to 100s/div * Waveform SAVE/RECALL 10 sets (REF0~REF9) * Averaging Function (2 ~ 256) * Smoothing Function ON/OFF * Max. Sweep Rate 10ns/div * ALT-MAG Function (x5, x10, x20) * Cursor Readout Function: V, T,1/ T * Panel Setting SAVE/RECALL 10 sets (M0~M9) * VERT Mode Triggering * RS-232C Interface 50MHz, 100MSa/s, 500MSa/s (ETS) CRT Type and Acceleration 6-inch CRT , 10kV Front panel control ILLUM Z-axis Input Sensitivity : at least 5V Polarity : positive going input decrease intensity Max. input voltage:30V(DC+ACpeak) Input Impedance :approx. 33k VERTICAL SYSTEM Deflection Coefficient 1mV ~ 2mV/div 5%, and Accuracy 5mV ~ 20V/div 3%, 14 steps in 1-2-5 sequence Variable Continuous 2.5 : 1 ~ min. 50V/div Bandwidth (-3dB) 1mV ~ 2mV/div: DC~7MHz 5mV ~ 20V/div: DC~50MHz CH1, CH2, DUAL (ALT or CHOP) Vertical Mode Chopper Frequency Approx. 250kHz Sum or Difference CH1+CH2, CH1-CH2 CH2 Invert 1M 2%//approx. 25pF Input Impedance AC, DC, GND Input Coupling Max. 400V(DC+ACpeak) Input Voltage HORIZONTAL SYSTEM Sweep Time Variable Continuously Accuracy Sweep Magnification Max. Sweep Time ALT-MAG Function HOLD-OFF Time TRIGGER Trigger Mode Trigger Source Trigger Coupling Trigger Slope ALT Trigger Indicator Trigger LED TV Sync. Separator Trigger Sensitivity External Trigger Input X-Y OPERATION Input Sensitivity Bandwidth X-Y Phase Shift DIGITAL STORAGE Acquisition Digitizer Max. Sampling Rate A23 DIGITAL MODE FUNCTIONS SPECIFICATIONS GRS-6052A GRS-6032A 30MHz, 100MSa/s, 500MSa/s (ETS) 6-inch CRT , 2kV Front panel control Sensitivity : at least 5V Polarity : positive going input decrease intensity Max. input voltage:30V(DC+ACpeak) Input Impedance :approx. 47k 1mV ~ 2mV/div 5%, 5mV ~ 20V/div 3%, 14 steps in 1-2-5 sequence 2.5 : 1 ~ min. 50V/div 1mV ~ 20mV/div: DC~7MHz 5mV ~ 20V/div: DC~30MHz CH1, CH2, DUAL (ALT or CHOP) Approx. 250kHz CH1+CH2, CH1-CH2 CH2 1M 2%//approx. 25pF AC, DC, GND Max. 400V(DC+ACpeak) 0.2 s/div ~ 0.5s/div, 20 steps 2.5 : 1 up to 1.25s/div (uncal.) 3%, 5% at x5/ x10MAG. 8% at x 20MAG x5, x10, x20 20ns/div (10ns/div uncal) Yes Variable 0.2 s/div ~ 0.5s/div, 20 steps 2.5 : 1 up to 1.25s/DIV (uncal.) 3%, 5% at x5/ x10MAG. 8% at x 20MAG x5, x10, x20 50ns/div (10ns~40ns/div uncal) Yes Variable AUTO, NORM, TV VERT, CH1, CH2, LINE, EXT AC, HFR, LFR + or - polarity Yes Yes TV-V(-), TV-H(-) AUTO, NORM, TV VERT, CH1, CH2, LINE, EXT AC, HFR, LFR + or - polarity Yes Yes TV-V(-), TV-H(-) 20Hz ~ 5MHz 5MHz ~ 40MHz GRS-6052A 20Hz ~ 2MHz 2MHz ~ 20MHz GRS-6032A CH1, CH2 0.5 div 1.5 div VERT-MODE 2.0 div 3.0 div EXT 200mV 800mV TV sync. pulse more than 1 DIV or 200mV (EXT) Input impedance :Approx. 1M //25pF (AC coupling) Max. input voltage :400V (DC + AC peak) X-axis : CH1 ; Y-axis : CH2 1mV/div ~ 20V/div X-axis : DC ~ 500kHz (-3dB) <3 from DC ~ 50kHz 40MHz ~ 50MHz 20MHz ~ 30MHz 2.0 div 3.5 div 1V X-axis : CH1 ; Y-axis : CH2 1mV/div ~ 20V/div X-axis : DC ~ 500kHz (-3dB) <3 from DC ~ 50kHz Storage Bandwidth Single shot: DC ~ 25MHz Repetitive: DC ~50MHz 5div Dynamic Range Memory Length Acquisition Memory 2k words/CH x 2, 1k words/CH(equivalent) 1k words/CH x 10 with back-up memory Save REF Memory (REF0~REF9) 1k words/CH x 4 waveform(max.) Display Memory Equivalent: 0.2 s/div ~ 0.5 s/div Sweep Time Normal Sample: 1 s/div ~ 0.1s/div Roll: 0.2s/div ~ 100s/div Sweep Magnification x 5, x 10, x 20 10ns/div Max.Sweep Time DOTS, LINEAR MAG Interpolation Yes ALT-MAG Function Sample, Peak detect(>25ns), Envelop. Acquire Mode Persist, Average(2~256) Auto, Norm, Single, Single-roll, Roll, Operation Mode X-Y, Run/Stop Smoothing Function Dot joint ON/OFF selectable Pre-trigger 0 ~10div in 0.02div steps Pre-Trigger X-axis: CH1 Y-axis: CH2 X-Y Operation DC~50MHz(-3dB) Storage Bandwidth H: 100points/div; V: 25points/div; Display Resolution X-Y: 25 x 25 points/div Waveform SAVE/RECALL 10 sets(REF0~REF9) Panel Setting SAVE/RECALL 10 sets(M0 ~M9) Single shot: DC ~ 25MHz Repetitive: DC ~30MHz 5div 2k words/CH x 2, 1k words/CH(equivalent) 1k words/CH x 10 with back-up memory (REF0~REF9) 1k words/CH x 4 waveform(max.) Equivalent: 0.2 s/div ~ 0.5 s/div Normal Sample: 1 s/div ~ 0.1s/div Roll: 0.2s/div ~ 100s/div x 5, x 10, x 20 10ns/div DOTS, LINEAR Yes Sample, Peak detect(>25ns), Envelop. Persist, Average(2~256) Auto, Norm, Single, Single-roll, Roll, X-Y, Run/Stop Dot joint ON/OFF selectable Pre-trigger 0 ~10DIV in 0.02div steps X-axis: CH1 Y-axis: CH2 DC~30MHz(-3dB) H: 100points/DIV; V: 25points/div; X-Y: 25 x 25 points/div 10 sets(REF0~REF9) 10 sets(M0 ~M9) READOUT & CURSOR V, T, 1/ T V, T, 1/ T Cursor Measurement Adjustable Adjustable Readout Intensity OUTPUT SIGNAL CH1 Signal Output Voltage : approx. 20mV/div (with 50 terminated) ; Bandwidth : 50Hz ~ 5MHz Calibrator Output Voltage : 0.5V 3% ; Frequency : approx. 1kHz, square wave INTERFACE RS-232C POWER SOURCE AC 100V/120V/230V 10%, 50/60Hz DIMENSIONS & WEIGHT 275(W) x 130(H) x 370(D) mm; Approx. 8.5kg ORDERING INFORMATION GRS-6052A 50MHz Digital Storage + Analog Oscilloscope GRS-6032A 30MHz Digital Storage + Analog Oscilloscope Pre-Trigger GRS-6000A Series provide Pre-Trigger function, which allows user to observe Pre-Trigger waveform up to 10 divisions ahead of the trigger point. ROLL Mode The low-speed transient event of the input signal could be viewed easily under ROLL Mode. The waveform will roll on from right to the left to show the updated input signal all the time. ALT-MAG With ALT-MAG function, the user could expand the waveforms by 5, 10, or 20 times for a more detailed waveform observation. Both original waveforms and expanded waveforms could be shown on the screen at the same time. ACCESSORIES : User manual x 1, Power cord x 1, GTP-060A-4 : 60MHz ( 10 : 1/1 :1 ) Switchable Passive Probe (one per channel) OPTIONAL ACCESSORIES GTC-001 GTC-002 GTL-110 GTL-232 Instrument Cart, 450(W) x 430(D)mm (120V Input Socket) Instrument Cart, 330(W) x 430(D)mm (120V Input Socket) Test Lead, BNC-BNC Heads RS232C Cable, 9-pin Female to 9-pin, Null Modem for Computer FREE DOWNLOAD PC Software Remote Control Software 8 bit ADC x 2 8 bit ADC x 2 500MSa/s for equivalent time sampling 500MSa/s for equivalent time sampling 100MSa/s for normal sampling 100MSa/s for normal sampling Made to Measure. Good Will Instrument Co., Ltd. A24 OSCILLOSCOPES OSCILLOSCOPES 50MHz/30MHz REAL-TIME/DIGITAL STORAGE OSCILLOSCOPE Rear Panel GRS-6052A/6032A FEATURES SPECIFICATIONS * GRS-6052A : DC~50MHz Bandwidth, 100MSa/s, 2kW/CH x 2 GRS-6032A : DC~30MHz Bandwidth, 100MSa/s, 2kW/CH x 2 * Equivalent Time Sampling of 500MSa/s max. * Acquire Mode : Peak Detect, Envelop, Persistence * Pre-Trigger Function 0 ~ 10 div * ROLL Mode to 100s/div * Waveform SAVE/RECALL 10 sets (REF0~REF9) * Averaging Function (2 ~ 256) * Smoothing Function ON/OFF * Max. Sweep Rate 10ns/div * ALT-MAG Function (x5, x10, x20) * Cursor Readout Function: V, T,1/ T * Panel Setting SAVE/RECALL 10 sets (M0~M9) * VERT Mode Triggering * RS-232C Interface 50MHz, 100MSa/s, 500MSa/s (ETS) CRT Type and Acceleration 6-inch CRT , 10kV Front panel control ILLUM Z-axis Input Sensitivity : at least 5V Polarity : positive going input decrease intensity Max. input voltage:30V(DC+ACpeak) Input Impedance :approx. 33k VERTICAL SYSTEM Deflection Coefficient 1mV ~ 2mV/div 5%, and Accuracy 5mV ~ 20V/div 3%, 14 steps in 1-2-5 sequence Variable Continuous 2.5 : 1 ~ min. 50V/div Bandwidth (-3dB) 1mV ~ 2mV/div: DC~7MHz 5mV ~ 20V/div: DC~50MHz CH1, CH2, DUAL (ALT or CHOP) Vertical Mode Chopper Frequency Approx. 250kHz Sum or Difference CH1+CH2, CH1-CH2 CH2 Invert 1M 2%//approx. 25pF Input Impedance AC, DC, GND Input Coupling Max. 400V(DC+ACpeak) Input Voltage HORIZONTAL SYSTEM Sweep Time Variable Continuously Accuracy Sweep Magnification Max. Sweep Time ALT-MAG Function HOLD-OFF Time TRIGGER Trigger Mode Trigger Source Trigger Coupling Trigger Slope ALT Trigger Indicator Trigger LED TV Sync. Separator Trigger Sensitivity External Trigger Input X-Y OPERATION Input Sensitivity Bandwidth X-Y Phase Shift DIGITAL STORAGE Acquisition Digitizer Max. Sampling Rate A23 DIGITAL MODE FUNCTIONS SPECIFICATIONS GRS-6052A GRS-6032A 30MHz, 100MSa/s, 500MSa/s (ETS) 6-inch CRT , 2kV Front panel control Sensitivity : at least 5V Polarity : positive going input decrease intensity Max. input voltage:30V(DC+ACpeak) Input Impedance :approx. 47k 1mV ~ 2mV/div 5%, 5mV ~ 20V/div 3%, 14 steps in 1-2-5 sequence 2.5 : 1 ~ min. 50V/div 1mV ~ 20mV/div: DC~7MHz 5mV ~ 20V/div: DC~30MHz CH1, CH2, DUAL (ALT or CHOP) Approx. 250kHz CH1+CH2, CH1-CH2 CH2 1M 2%//approx. 25pF AC, DC, GND Max. 400V(DC+ACpeak) 0.2 s/div ~ 0.5s/div, 20 steps 2.5 : 1 up to 1.25s/div (uncal.) 3%, 5% at x5/ x10MAG. 8% at x 20MAG x5, x10, x20 20ns/div (10ns/div uncal) Yes Variable 0.2 s/div ~ 0.5s/div, 20 steps 2.5 : 1 up to 1.25s/DIV (uncal.) 3%, 5% at x5/ x10MAG. 8% at x 20MAG x5, x10, x20 50ns/div (10ns~40ns/div uncal) Yes Variable AUTO, NORM, TV VERT, CH1, CH2, LINE, EXT AC, HFR, LFR + or - polarity Yes Yes TV-V(-), TV-H(-) AUTO, NORM, TV VERT, CH1, CH2, LINE, EXT AC, HFR, LFR + or - polarity Yes Yes TV-V(-), TV-H(-) 20Hz ~ 5MHz 5MHz ~ 40MHz GRS-6052A 20Hz ~ 2MHz 2MHz ~ 20MHz GRS-6032A CH1, CH2 0.5 div 1.5 div VERT-MODE 2.0 div 3.0 div EXT 200mV 800mV TV sync. pulse more than 1 DIV or 200mV (EXT) Input impedance :Approx. 1M //25pF (AC coupling) Max. input voltage :400V (DC + AC peak) X-axis : CH1 ; Y-axis : CH2 1mV/div ~ 20V/div X-axis : DC ~ 500kHz (-3dB) <3 from DC ~ 50kHz 40MHz ~ 50MHz 20MHz ~ 30MHz 2.0 div 3.5 div 1V X-axis : CH1 ; Y-axis : CH2 1mV/div ~ 20V/div X-axis : DC ~ 500kHz (-3dB) <3 from DC ~ 50kHz Storage Bandwidth Single shot: DC ~ 25MHz Repetitive: DC ~50MHz 5div Dynamic Range Memory Length Acquisition Memory 2k words/CH x 2, 1k words/CH(equivalent) 1k words/CH x 10 with back-up memory Save REF Memory (REF0~REF9) 1k words/CH x 4 waveform(max.) Display Memory Equivalent: 0.2 s/div ~ 0.5 s/div Sweep Time Normal Sample: 1 s/div ~ 0.1s/div Roll: 0.2s/div ~ 100s/div Sweep Magnification x 5, x 10, x 20 10ns/div Max.Sweep Time DOTS, LINEAR MAG Interpolation Yes ALT-MAG Function Sample, Peak detect(>25ns), Envelop. Acquire Mode Persist, Average(2~256) Auto, Norm, Single, Single-roll, Roll, Operation Mode X-Y, Run/Stop Smoothing Function Dot joint ON/OFF selectable Pre-trigger 0 ~10div in 0.02div steps Pre-Trigger X-axis: CH1 Y-axis: CH2 X-Y Operation DC~50MHz(-3dB) Storage Bandwidth H: 100points/div; V: 25points/div; Display Resolution X-Y: 25 x 25 points/div Waveform SAVE/RECALL 10 sets(REF0~REF9) Panel Setting SAVE/RECALL 10 sets(M0 ~M9) Single shot: DC ~ 25MHz Repetitive: DC ~30MHz 5div 2k words/CH x 2, 1k words/CH(equivalent) 1k words/CH x 10 with back-up memory (REF0~REF9) 1k words/CH x 4 waveform(max.) Equivalent: 0.2 s/div ~ 0.5 s/div Normal Sample: 1 s/div ~ 0.1s/div Roll: 0.2s/div ~ 100s/div x 5, x 10, x 20 10ns/div DOTS, LINEAR Yes Sample, Peak detect(>25ns), Envelop. Persist, Average(2~256) Auto, Norm, Single, Single-roll, Roll, X-Y, Run/Stop Dot joint ON/OFF selectable Pre-trigger 0 ~10DIV in 0.02div steps X-axis: CH1 Y-axis: CH2 DC~30MHz(-3dB) H: 100points/DIV; V: 25points/div; X-Y: 25 x 25 points/div 10 sets(REF0~REF9) 10 sets(M0 ~M9) READOUT & CURSOR V, T, 1/ T V, T, 1/ T Cursor Measurement Adjustable Adjustable Readout Intensity OUTPUT SIGNAL CH1 Signal Output Voltage : approx. 20mV/div (with 50 terminated) ; Bandwidth : 50Hz ~ 5MHz Calibrator Output Voltage : 0.5V 3% ; Frequency : approx. 1kHz, square wave INTERFACE RS-232C POWER SOURCE AC 100V/120V/230V 10%, 50/60Hz DIMENSIONS & WEIGHT 275(W) x 130(H) x 370(D) mm; Approx. 8.5kg ORDERING INFORMATION GRS-6052A 50MHz Digital Storage + Analog Oscilloscope GRS-6032A 30MHz Digital Storage + Analog Oscilloscope Pre-Trigger GRS-6000A Series provide Pre-Trigger function, which allows user to observe Pre-Trigger waveform up to 10 divisions ahead of the trigger point. ROLL Mode The low-speed transient event of the input signal could be viewed easily under ROLL Mode. The waveform will roll on from right to the left to show the updated input signal all the time. ALT-MAG With ALT-MAG function, the user could expand the waveforms by 5, 10, or 20 times for a more detailed waveform observation. Both original waveforms and expanded waveforms could be shown on the screen at the same time. ACCESSORIES : User manual x 1, Power cord x 1, GTP-060A-4 : 60MHz ( 10 : 1/1 :1 ) Switchable Passive Probe (one per channel) OPTIONAL ACCESSORIES GTC-001 GTC-002 GTL-110 GTL-232 Instrument Cart, 450(W) x 430(D)mm (120V Input Socket) Instrument Cart, 330(W) x 430(D)mm (120V Input Socket) Test Lead, BNC-BNC Heads RS232C Cable, 9-pin Female to 9-pin, Null Modem for Computer FREE DOWNLOAD PC Software Remote Control Software 8 bit ADC x 2 8 bit ADC x 2 500MSa/s for equivalent time sampling 500MSa/s for equivalent time sampling 100MSa/s for normal sampling 100MSa/s for normal sampling Made to Measure. Good Will Instrument Co., Ltd. A24