GRS-6052A
GRS-6032A
50MHz Digital Storage + Analog Oscilloscope
30MHz Digital Storage + Analog Oscilloscope
GTC-001 Instrument Cart, 450(W) x 430(D)mm (120V Input Socket)
GTC-002 Instrument Cart, 330(W) x 430(D)mm (120V Input Socket)
GTL-232 RS232C Cable, 9-pin Female to 9-pin, Null Modem for Computer
* ALT-MAG Function (x5, x10, x20)
* RS-232C Interface
* GRS-6052A : DC~50MHz Bandwidth,
100MSa/s, 2kW/CH x 2
GRS-6032A : DC~30MHz Bandwidth,
100MSa/s, 2kW/CH x 2
* Equivalent Time Sampling of 500MSa/s max.
* Acquire Mode : Peak Detect, Envelop,
Persistence
* Pre-Trigger Function 0 ~ 10 div
* ROLL Mode to 100s/div
* Averaging Function (2 ~ 256)
* Smoothing Function ON/OFF
* Max. Sweep Rate 10ns/div
* Waveform SAVE/RECALL 10 sets (REF0~REF9)
* VERT Mode Triggering
* Panel Setting SAVE/RECALL 10 sets (M0~M9)
* Cursor Readout Function: V, T,1/ T
FEATURES
DIGITAL MODE FUNCTIONS
GRS-6000A Series provide Pre-Trigger function, which
allows user to observe Pre-Trigger waveform up to
10 divisions ahead of the trigger point.
Pre-Trigger
The low-speed transient event of the input signal
could be viewed easily under ROLL Mode. The waveform
will roll on from right to the left to show the updated
input signal all the time.
ROLL Mode
With ALT-MAG function, the user could expand the
waveforms by 5, 10, or 20 times for a more detailed
waveform observation. Both original waveforms
and expanded waveforms could be shown on the
screen at the same time.
ALT-MAG
Made to Measure. Good Will Instrument Co., Ltd.
OSCILLOSCOPES
OSCILLOSCOPES
A23 A24
ILLUM
Type and Acceleration
Z-axis Input
Deflection Coefficient
and Accuracy
Variable Continuous
Bandwidth (-3dB)
Vertical Mode
Chopper Frequency
Sum or Difference
Invert
Input Impedance
Input Coupling
Input Voltage
Sweep Time
Variable Continuously
Accuracy
Sweep Magnification
Max. Sweep Time
HOLD-OFF Time
ALT-MAG Function
Trigger Mode
Trigger Source
Trigger Coupling
Trigger Slope
ALT Trigger
Indicator Trigger LED
TV Sync. Separator
Trigger Sensitivity
External Trigger Input
Input
Sensitivity
Bandwidth
X-Y Phase Shift
Input impedance :Approx. 1M //25pF (AC coupling)
Max. input voltage :400V (DC + AC peak)
TV sync. pulse more than 1 DIV or 200mV (EXT)
GRS-6032A
GRS-6052A
20Hz ~ 2MHz
20Hz ~ 5MHz
2MHz ~ 20MHz
5MHz ~ 40MHz
20MHz ~ 30MHz
40MHz ~ 50MHz
CH1, CH2 0.5 div 1.5 div
2.0 div
VERT-MODE 2.0 div 3.0 div 3.5 div
EXT 200mV 800mV 1V
6-inch CRT , 2kV
Front panel control
GRS-6032A
30MHz, 100MSa/s, 500MSa/s (ETS)
Sensitivity : at least 5V
Polarity : positive going input
decrease intensity
Input Impedance :approx. 47k
1mV ~ 2mV/div 5%,
5mV ~ 20V/div 3%,
14 steps in 1-2-5 sequence
2.5 : 1 ~ min. 50V/div
1mV ~ 20mV/div: DC~7MHz
5mV ~ 20V/div: DC~30MHz
Approx. 250kHz
CH1, CH2, DUAL (ALT or CHOP)
CH1+CH2, CH1-CH2
CH2
1M 2%//approx. 25pF
AC, DC, GND
Max. 400V(DC+ACpeak)
0.2 s/div ~ 0.5s/div, 20 steps
2.5 : 1 up to 1.25s/DIV (uncal.)
3%, 5% at x5/ x10MAG.
8% at x 20MAG
x5, x10, x20
50ns/div (10ns~40ns/div uncal)
Yes
Variable
AUTO, NORM, TV
VERT, CH1, CH2, LINE, EXT
AC, HFR, LFR
+ or - polarity
Yes
Yes
TV-V(-), TV-H(-)
X-axis : CH1 ; Y-axis : CH2
1mV/div ~ 20V/div
X-axis : DC ~ 500kHz (-3dB)
<3 from DC ~ 50kHz
Max. input voltage:30V(DC+ACpeak)
6-inch CRT , 10kV
Front panel control
GRS-6052A
50MHz, 100MSa/s, 500MSa/s (ETS)
Sensitivity : at least 5V
Polarity : positive going input
decrease intensity
1mV ~ 2mV/div 5%,
5mV ~ 20V/div 3%,
14 steps in 1-2-5 sequence
2.5 : 1 ~ min. 50V/div
1mV ~ 2mV/div: DC~7MHz
5mV ~ 20V/div: DC~50MHz
Approx. 250kHz
CH1, CH2, DUAL (ALT or CHOP)
CH1+CH2, CH1-CH2
CH2
1M 2%//approx. 25pF
AC, DC, GND
Max. 400V(DC+ACpeak)
0.2 s/div ~ 0.5s/div, 20 steps
2.5 : 1 up to 1.25s/div (uncal.)
3%, 5% at x5/ x10MAG.
8% at x 20MAG
x5, x10, x20
20ns/div (10ns/div uncal)
Yes
Variable
AUTO, NORM, TV
VERT, CH1, CH2, LINE, EXT
AC, HFR, LFR
+ or - polarity
Yes
Yes
TV-V(-), TV-H(-)
X-axis : CH1 ; Y-axis : CH2
1mV/div ~ 20V/div
X-axis : DC ~ 500kHz (-3dB)
<3 from DC ~ 50kHz
Input Impedance :approx. 33k
Max. input voltage:30V(DC+ACpeak)
Acquisition Digitizer
Max. Sampling Rate
8 bit ADC x 2
500MSa/s for equivalent time sampling
100MSa/s for normal sampling
8 bit ADC x 2
500MSa/s for equivalent time sampling
100MSa/s for normal sampling
TRIGGER
DIGITAL STORAGE
X-Y OPERATION
HORIZONTAL SYSTEM
VERTICAL SYSTEM
CRT
SPECIFICATIONS
OUTPUT SIGNAL
READOUT & CURSOR
DIMENSIONS & WEIGHT
Memory Length
Acquisition Memory
Save REF Memory
Display Memory
Sweep Time
Sweep Magnification
Max.Sweep Time
MAG Interpolation
ALT-MAG Function
Acquire Mode
Operation Mode
Smoothing Function
Pre-Trigger
X-Y Operation
Display Resolution
Waveform SAVE/RECALL
Storage Bandwidth
CH1 Signal Output
Panel Setting SAVE/RECALL
Cursor Measurement
Readout Intensity
Calibrator Output Voltage : approx. 20mV/div (with 50 terminated) ; Bandwidth : 50Hz ~ 5MHz
Voltage : 0.5V 3% ; Frequency : approx. 1kHz, square wave
RS-232C
AC 100V/120V/230V 10%, 50/60Hz
User manual x 1, Power cord x 1,
GTP-060A-4 : 60MHz ( 10 : 1/1 :1 ) Switchable Passive Probe (one per channel)
275(W) x 130(H) x 370(D) mm; Approx. 8.5kg
2k words/CH x 2, 1k words/CH(equivalent)
(REF0~REF9)
1k words/CH x 10 with back-up memory
1k words/CH x 4 waveform(max.)
Equivalent: 0.2 s/div ~ 0.5 s/div
Normal Sample: 1 s/div ~ 0.1s/div
Roll: 0.2s/div ~ 100s/div
x 5, x 10, x 20
10ns/div
DOTS, LINEAR
Yes
Sample, Peak detect(>25ns), Envelop.
Persist, Average(2~256)
2k words/CH x 2, 1k words/CH(equivalent)
1k words/CH x 10 with back-up memory
(REF0~REF9)
1k words/CH x 4 waveform(max.)
Equivalent: 0.2 s/div ~ 0.5 s/div
Normal Sample: 1 s/div ~ 0.1s/div
Roll: 0.2s/div ~ 100s/div
x 5, x 10, x 20
10ns/div
DOTS, LINEAR
Yes
Auto, Norm, Single, Single-roll, Roll, X-Y,
Run/Stop
Dot joint ON/OFF selectable
Pre-trigger 0 ~10DIV in 0.02div steps
X-axis: CH1 Y-axis: CH2
DC~30MHz(-3dB)
H: 100points/DIV; V: 25points/div;
X-Y: 25 x 25 points/div
10 sets(REF0~REF9)
10 sets(M0 ~M9)
V, T, 1/ T
Adjustable
Sample, Peak detect(>25ns), Envelop.
Persist, Average(2~256)
Auto, Norm, Single, Single-roll, Roll,
X-Y, Run/Stop
Dot joint ON/OFF selectable
Pre-trigger 0 ~10div in 0.02div steps
X-axis: CH1 Y-axis: CH2
H: 100points/div; V: 25points/div;
X-Y: 25 x 25 points/div
10 sets(REF0~REF9)
10 sets(M0 ~M9)
V, T, 1/ T
Adjustable
DC~50MHz(-3dB)
Storage Bandwidth
Dynamic Range
Single shot: DC ~ 25MHz
Repetitive: DC ~30MHz
5div
Single shot: DC ~ 25MHz
Repetitive: DC ~50MHz
5div
POWER SOURCE
INTERFACE
ACCESSORIES :
SPECIFICATIONS
GRS-6052A/6032A
50MHz/30MHz REAL-TIME/DIGITAL STORAGE OSCILLOSCOPE
Rear Panel
GTL-110 Test Lead, BNC-BNC Heads
PC Software Remote Control Software
ORDERING INFORMATION
OPTIONAL ACCESSORIES
FREE DOWNLOAD
GRS-6052A
GRS-6032A
50MHz Digital Storage + Analog Oscilloscope
30MHz Digital Storage + Analog Oscilloscope
GTC-001 Instrument Cart, 450(W) x 430(D)mm (120V Input Socket)
GTC-002 Instrument Cart, 330(W) x 430(D)mm (120V Input Socket)
GTL-232 RS232C Cable, 9-pin Female to 9-pin, Null Modem for Computer
* ALT-MAG Function (x5, x10, x20)
* RS-232C Interface
* GRS-6052A : DC~50MHz Bandwidth,
100MSa/s, 2kW/CH x 2
GRS-6032A : DC~30MHz Bandwidth,
100MSa/s, 2kW/CH x 2
* Equivalent Time Sampling of 500MSa/s max.
* Acquire Mode : Peak Detect, Envelop,
Persistence
* Pre-Trigger Function 0 ~ 10 div
* ROLL Mode to 100s/div
* Averaging Function (2 ~ 256)
* Smoothing Function ON/OFF
* Max. Sweep Rate 10ns/div
* Waveform SAVE/RECALL 10 sets (REF0~REF9)
* VERT Mode Triggering
* Panel Setting SAVE/RECALL 10 sets (M0~M9)
* Cursor Readout Function: V, T,1/ T
FEATURES
DIGITAL MODE FUNCTIONS
GRS-6000A Series provide Pre-Trigger function, which
allows user to observe Pre-Trigger waveform up to
10 divisions ahead of the trigger point.
Pre-Trigger
The low-speed transient event of the input signal
could be viewed easily under ROLL Mode. The waveform
will roll on from right to the left to show the updated
input signal all the time.
ROLL Mode
With ALT-MAG function, the user could expand the
waveforms by 5, 10, or 20 times for a more detailed
waveform observation. Both original waveforms
and expanded waveforms could be shown on the
screen at the same time.
ALT-MAG
Made to Measure. Good Will Instrument Co., Ltd.
OSCILLOSCOPES
OSCILLOSCOPES
A23 A24
ILLUM
Type and Acceleration
Z-axis Input
Deflection Coefficient
and Accuracy
Variable Continuous
Bandwidth (-3dB)
Vertical Mode
Chopper Frequency
Sum or Difference
Invert
Input Impedance
Input Coupling
Input Voltage
Sweep Time
Variable Continuously
Accuracy
Sweep Magnification
Max. Sweep Time
HOLD-OFF Time
ALT-MAG Function
Trigger Mode
Trigger Source
Trigger Coupling
Trigger Slope
ALT Trigger
Indicator Trigger LED
TV Sync. Separator
Trigger Sensitivity
External Trigger Input
Input
Sensitivity
Bandwidth
X-Y Phase Shift
Input impedance :Approx. 1M //25pF (AC coupling)
Max. input voltage :400V (DC + AC peak)
TV sync. pulse more than 1 DIV or 200mV (EXT)
GRS-6032A
GRS-6052A
20Hz ~ 2MHz
20Hz ~ 5MHz
2MHz ~ 20MHz
5MHz ~ 40MHz
20MHz ~ 30MHz
40MHz ~ 50MHz
CH1, CH2 0.5 div 1.5 div
2.0 div
VERT-MODE 2.0 div 3.0 div 3.5 div
EXT 200mV 800mV 1V
6-inch CRT , 2kV
Front panel control
GRS-6032A
30MHz, 100MSa/s, 500MSa/s (ETS)
Sensitivity : at least 5V
Polarity : positive going input
decrease intensity
Input Impedance :approx. 47k
1mV ~ 2mV/div 5%,
5mV ~ 20V/div 3%,
14 steps in 1-2-5 sequence
2.5 : 1 ~ min. 50V/div
1mV ~ 20mV/div: DC~7MHz
5mV ~ 20V/div: DC~30MHz
Approx. 250kHz
CH1, CH2, DUAL (ALT or CHOP)
CH1+CH2, CH1-CH2
CH2
1M 2%//approx. 25pF
AC, DC, GND
Max. 400V(DC+ACpeak)
0.2 s/div ~ 0.5s/div, 20 steps
2.5 : 1 up to 1.25s/DIV (uncal.)
3%, 5% at x5/ x10MAG.
8% at x 20MAG
x5, x10, x20
50ns/div (10ns~40ns/div uncal)
Yes
Variable
AUTO, NORM, TV
VERT, CH1, CH2, LINE, EXT
AC, HFR, LFR
+ or - polarity
Yes
Yes
TV-V(-), TV-H(-)
X-axis : CH1 ; Y-axis : CH2
1mV/div ~ 20V/div
X-axis : DC ~ 500kHz (-3dB)
<3 from DC ~ 50kHz
Max. input voltage:30V(DC+ACpeak)
6-inch CRT , 10kV
Front panel control
GRS-6052A
50MHz, 100MSa/s, 500MSa/s (ETS)
Sensitivity : at least 5V
Polarity : positive going input
decrease intensity
1mV ~ 2mV/div 5%,
5mV ~ 20V/div 3%,
14 steps in 1-2-5 sequence
2.5 : 1 ~ min. 50V/div
1mV ~ 2mV/div: DC~7MHz
5mV ~ 20V/div: DC~50MHz
Approx. 250kHz
CH1, CH2, DUAL (ALT or CHOP)
CH1+CH2, CH1-CH2
CH2
1M 2%//approx. 25pF
AC, DC, GND
Max. 400V(DC+ACpeak)
0.2 s/div ~ 0.5s/div, 20 steps
2.5 : 1 up to 1.25s/div (uncal.)
3%, 5% at x5/ x10MAG.
8% at x 20MAG
x5, x10, x20
20ns/div (10ns/div uncal)
Yes
Variable
AUTO, NORM, TV
VERT, CH1, CH2, LINE, EXT
AC, HFR, LFR
+ or - polarity
Yes
Yes
TV-V(-), TV-H(-)
X-axis : CH1 ; Y-axis : CH2
1mV/div ~ 20V/div
X-axis : DC ~ 500kHz (-3dB)
<3 from DC ~ 50kHz
Input Impedance :approx. 33k
Max. input voltage:30V(DC+ACpeak)
Acquisition Digitizer
Max. Sampling Rate
8 bit ADC x 2
500MSa/s for equivalent time sampling
100MSa/s for normal sampling
8 bit ADC x 2
500MSa/s for equivalent time sampling
100MSa/s for normal sampling
TRIGGER
DIGITAL STORAGE
X-Y OPERATION
HORIZONTAL SYSTEM
VERTICAL SYSTEM
CRT
SPECIFICATIONS
OUTPUT SIGNAL
READOUT & CURSOR
DIMENSIONS & WEIGHT
Memory Length
Acquisition Memory
Save REF Memory
Display Memory
Sweep Time
Sweep Magnification
Max.Sweep Time
MAG Interpolation
ALT-MAG Function
Acquire Mode
Operation Mode
Smoothing Function
Pre-Trigger
X-Y Operation
Display Resolution
Waveform SAVE/RECALL
Storage Bandwidth
CH1 Signal Output
Panel Setting SAVE/RECALL
Cursor Measurement
Readout Intensity
Calibrator Output Voltage : approx. 20mV/div (with 50 terminated) ; Bandwidth : 50Hz ~ 5MHz
Voltage : 0.5V 3% ; Frequency : approx. 1kHz, square wave
RS-232C
AC 100V/120V/230V 10%, 50/60Hz
User manual x 1, Power cord x 1,
GTP-060A-4 : 60MHz ( 10 : 1/1 :1 ) Switchable Passive Probe (one per channel)
275(W) x 130(H) x 370(D) mm; Approx. 8.5kg
2k words/CH x 2, 1k words/CH(equivalent)
(REF0~REF9)
1k words/CH x 10 with back-up memory
1k words/CH x 4 waveform(max.)
Equivalent: 0.2 s/div ~ 0.5 s/div
Normal Sample: 1 s/div ~ 0.1s/div
Roll: 0.2s/div ~ 100s/div
x 5, x 10, x 20
10ns/div
DOTS, LINEAR
Yes
Sample, Peak detect(>25ns), Envelop.
Persist, Average(2~256)
2k words/CH x 2, 1k words/CH(equivalent)
1k words/CH x 10 with back-up memory
(REF0~REF9)
1k words/CH x 4 waveform(max.)
Equivalent: 0.2 s/div ~ 0.5 s/div
Normal Sample: 1 s/div ~ 0.1s/div
Roll: 0.2s/div ~ 100s/div
x 5, x 10, x 20
10ns/div
DOTS, LINEAR
Yes
Auto, Norm, Single, Single-roll, Roll, X-Y,
Run/Stop
Dot joint ON/OFF selectable
Pre-trigger 0 ~10DIV in 0.02div steps
X-axis: CH1 Y-axis: CH2
DC~30MHz(-3dB)
H: 100points/DIV; V: 25points/div;
X-Y: 25 x 25 points/div
10 sets(REF0~REF9)
10 sets(M0 ~M9)
V, T, 1/ T
Adjustable
Sample, Peak detect(>25ns), Envelop.
Persist, Average(2~256)
Auto, Norm, Single, Single-roll, Roll,
X-Y, Run/Stop
Dot joint ON/OFF selectable
Pre-trigger 0 ~10div in 0.02div steps
X-axis: CH1 Y-axis: CH2
H: 100points/div; V: 25points/div;
X-Y: 25 x 25 points/div
10 sets(REF0~REF9)
10 sets(M0 ~M9)
V, T, 1/ T
Adjustable
DC~50MHz(-3dB)
Storage Bandwidth
Dynamic Range
Single shot: DC ~ 25MHz
Repetitive: DC ~30MHz
5div
Single shot: DC ~ 25MHz
Repetitive: DC ~50MHz
5div
POWER SOURCE
INTERFACE
ACCESSORIES :
SPECIFICATIONS
GRS-6052A/6032A
50MHz/30MHz REAL-TIME/DIGITAL STORAGE OSCILLOSCOPE
Rear Panel
GTL-110 Test Lead, BNC-BNC Heads
PC Software Remote Control Software
ORDERING INFORMATION
OPTIONAL ACCESSORIES
FREE DOWNLOAD
