~ 1.0/2.3 Amphenol Description Amphenol 1.0/2.3 coaxial connectors are . miniature 50 ohm units with threaded coupling mechanisms which provide positive mating. The compact design of the 1.0/2.3 permits dense connector packing, making these connectors ideally suited to applications where space limitation is a factor. Application * Telecommunications * Switching equipment and routers * Datacom 1.0/2.3 Specifications 18 Features/Benefits Plugs & Receptacles 19 * Meets DIN 41626, DIN 47297 and NFC 93- 571 international specifications. Plugs and bulkhead jacks available in push pull types ensuring high reliability and a lower installed cost. * Mates with DIN 41612 Two-Piece connectors. Amphenol Corporation Tel: 800-627-7100 www.amphenolcnp.com 17 1.0/2.3 SPECIFICATIONS* ELECTRICAL MECHANICAL Impedance 50 ohms Mating Snap-On Frequency range 0-10 GHz coupling Voltage rating 350 Volts peak Cable affixment Hex crimp Other Contact resistance: Center contact 6 millionm Outer contact 3 millionm Insulation resistance: 10000 megohms ENVIRONMENTAL Temperature range ~ 40C to +155C Connector Durability 500 matings Jack 6,5 - Ot . 5,9 31 | (braid or jacket) Cable affixment (center conductor) Crimp or solder Captivated contacts | All crimps MATERIAL Contacts Male: Brass Female: (center and outer) Beryllium copper. Gold plated Other metal parts Brass, nickel plated Insulators Teflon Crimp ferrule Copper * These characteristics are typical and may not apply to all connectors. 30 + 2 , VLLLLL AL LOD s Ih. wo} % = | Sles Soo|oo ' + ' | ] 2 q| P] + 1ale Amphenol Corporation Tel: 800-627-7100 = oO wm + op Plug 18 www.amphenolcnp.com Amphenol 1.0/2.3 Amphenol Straight Plugs 102-990-06 Bulkhead Jacks 102-913-006 102-913-34 Fig. 3 Jack Receptacle 102-911-02 Fig. 4 Printed Circuit Board Jack Receptacle 102-909-01 1.0/2.3 PLUGS, BULKHEAD JACKS, RECEPTACLES Connector. Cabl Cable Attachment Dimensions, inches (millimeters) Amphenol Fi Description ame Outer Inner a b c Number 9 Plug RG 174, 188, 5 I 1.04 .287 127 7 316 Crimp Solder (26.5) (7.3) (3.25) 102-990-06 1 RG 174, 188, 5 984 .216 127 974-1 316 Crimp Solder (2.5) 6.5) (3.25) 102-913-06 2 Bulkhead Jack L910/19 Crimp Solder .984 216 16l 102-913-34 2 RG 180 (25) (5.5) (4.1) Receptacle Rear Mount Solder Cup 645 (16.4) .216 (6.5) _ 102-911-02 3 Printed Circuit Receptacle va Blunt Post .764 (19.4) .291 (7.4) _ 102-909-01 4 4 legs & terminal Accomodates cabie diameter Amphenol Corporation Tel: 800-627-7100 www.amphenolenp.cam 19