MPS6513 NPN General Purpose Amplifier * This device is designed as a general purpose amplifier and switch. * The useful dynamic range extends to 100mA as a switch and to 100MHz as an amplifier. * Sourced from Proces 23. TO-92 1 1. Emitter 2. Base 3. Collector Absolute Maximum Ratings TC=25C unless otherwise noted Value Units VCBO Symbol Collector-Base Voltage Parameter 40 V VCEO Collector-Emitter Voltage 30 V VEBO Emitter-Base Voltage 4 V IC Collector Current (DC) 200 mA TJ, TSTG Operating and Storage Junction Temperature Range -55 ~ 150 C * These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1. These ratings are based on a maximum junction temperature of 150 degrees C. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Ta=25C unless otherwise noted Max. Units PD Symbol Total Device Dissipation Derate above 25C Parameter 625 5.0 mW mW/C RJC Thermal Resistance, Junction to Case 83.3 C/W RJA Thermal Resistance, Junction to Ambient 200 C/W *Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06". Electrical Characteristics TC=25C unless otherwise noted Symbol Parameter Test Condition Min. Typ. Max. Units BVCBO Collector-Base Voltage IC = 10 A 40 V BVCEO Collector-Emitter Voltage IC = 0.5 mA 30 V BVEBO Emitter-Base Voltage IE = 10 A 4 ICBO Collector-Base Cut-off Current VCB = 30 V, T = 25 C T = 60 C hFE DC Current Gain VCE = 10V, IC = 2mA VCE = 10V, IC = 100mA VCE(sat) Collector-Emitter Saturation Voltage IC = 50 mA, IB = 5 mA 0.5 V Cob Output Capacitance VCB = 5V, f = 1.0 MHz 3.5 pF V 0.05 1.0 90 60 A 180 NOTES: 1. These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3. These ratings are based on a maximum junction temperature of 150degrees C. (c) 2007 Fairchild Semiconductor Corporation MPS6513 Rev. 1.0.0 www.fairchildsemi.com 1 MPS6513 -- NPN General Purpose Amplifier September 2007 The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx(R) Build it NowTM CorePLUSTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) Power247(R) POWEREDGE(R) Power-SPMTM PowerTrench(R) Programmable Active DroopTM QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 Green FPSTM Green FPSTM e-SeriesTM GTOTM i-LoTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM Motion-SPMTM OPTOLOGIC(R) OPTOPLANAR(R) Fairchild(R) Fairchild Semiconductor(R) FACT Quiet SeriesTM FACT(R) FAST(R) FastvCoreTM FPSTM FRFET(R) Global Power ResourceSM (R) PDP-SPMTM Power220(R) SuperSOTTM-8 SyncFETTM The Power Franchise(R) TinyBoostTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM SerDesTM UHC(R) UniFETTM VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I30 (c) 2007 Fairchild Semiconductor Corporation MPS6513 Rev. 1.0.0 www.fairchildsemi.com 2 MPS6513 NPN General Purpose Amplifier TRADEMARKS