• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and prod uct information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
1
SPDT RF Switch,
20 - 2000 MHz
Rev. V3
SW-112-PIN
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Features
• Ultra Broadband
• High Isolation: 70 dB Typical
• Integral TTL Driver
• Hermetic Package
• 50 Ohm Nominal Impedance
• MIL-STD-883 Screening Available
Description
Ordering Information
Part Number Package
SW-112-PIN DI-1
Note: Reference Application Note M513 for reel size
information.
Note: Die quantity varies.
Functional Block Diagram
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
Truth Table
Condition of Switch
RF Common to Each RF
Port
RF1 RF2
0 On Off
1 Off On
TTL Control Input
“1” = TTL Logic
High
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and prod uct information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
2
SPDT RF Switch,
20 - 2000 MHz
Rev. V3
SW-112-PIN
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Electrical Specifications: TA = -55°C to +85°C 1
Parameter Test Conditions Frequency Units Min Typ Max
Insertion Loss — 20 - 2000 MHz
20 - 1000 MHz
20 - 500 MHz
dB
dB
dB
—
—
—
—
—
—
2.2
2.0
1.8
VSWR — 20 - 2000 MHz
20 - 1000 MHz Ratio
Ratio —
— —
— 1.5:1
1.2:1
Isolation — 20 - 2000 MHz
20 - 1000 MHz
20 - 500 MHz
dB
dB
dB
50
60
70
—
—
—
—
—
—
Ton
Toff
Transients
In-band
—
—
—
µS
µS
mV
—
—
—
2.0
1.0
40
—
—
—
1 dB Compression Input Power — dBm — 13 —
IP2 For two tone input power up to +5 dBm — dBm — +60 —
IP3 For two tone input power up to +5 dBm — dBm — +30 —
Bias Power +9 to +15 VDC @ 35 mA Max
-5 VDC ± 5% @ 35 mA Max — mW — 500 —
1. All specifications apply when operated with bias voltages of +12 VDC and –5 VDC (± 5%) and 50 ohm impedance at all RF
ports.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and prod uct information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
3
SPDT RF Switch,
20 - 2000 MHz
Rev. V3
SW-112-PIN
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Typical Performance Curves
Insertion Loss
0.0
1.0
2.0
3.0
2 5 10 50 100 500 1000 2000
Freque nc y (M H z)
+85°C +25°C -55°C
VSWR
1.0
1.2
1.4
1.6
1.8
2 5 10 50 100 500 1000 2000
Fr e quenc y (MHz)
Isolation
20
40
60
80
10 0
2 5 10 50 100 500 1000 2000
Freque ncy (M Hz)
VSWR Insertion Loss (dB)
Isolation (dB)
