66
www.birtcherproducts.com • 888-957-8291
24 SERIES LOK-TAINER
BOARD
71 SERIES
Left Hand Shown
EXTRACTOR
PIN INCLUDED
-1 ANODIZE PER MIL-A-8625 RED
FINISH TABLE
DASH #
-2 ANODIZE PER MIL-A-8625 BLUE
-3 ANODIZE PER MIL-A-8625 GREEN
FINISH
-4 ANODIZE PER MIL-A-8625 YELLOW
COLOR
-6 ANODIZE PER MIL-A-8625 ORANGE
-7 ANODIZE PER MIL-A-8625 PURPLE
-5 ANODIZE PER MIL-A-8625 BLACK
-CC CHEM FILM PER MIL-C-5541 CLEAR
NONE CHEM FILM PER MIL-C-5541 GOLD
-9 ANODIZE PER MIL-A-8625 BROWN
-10 ANODIZE PER MIL-A-8625 CLEAR
-8 ANODIZE PER MIL-A-8625 GRAY
COLORS ARE AN ADDITIONAL CHARGE
ACTUATOR TAB (OPTIONAL)
HAND ACTION LEFT OR RIGHT ("L" or "R")
BOARD THICKNESS (SEE BOARD THICKNESS TABLE)
SERIES
71
PART NUMBER CODE:
- A - X - A - BL- F
FINISH (SEE FINISH TABLE)
BENT LEG (OPTIONAL)
- N
NO SPRING PIN (OPTIONAL)
STRAIGHT HANDLE (OPTIONAL)
S
MATERIAL (SEE MATERIAL TABLE)
- M
-1 .031(0.787) .25(6.35) .26(6.60)
BOARD THICKNESS TABLE
DASH #
-2 .063(1.600) .25(6.35) .29(7.37)
-3 .094(2.390) .25(6.35) .29(7.37)
THICKNESS
-4 .125(3.180) .29(7.37) .33(8.38)
A B
MATERIALS TABLE
NONE .063 ALUMINUM
ALLOY 5052-H32
PER QQ-A-250/8
T6 .063 ALUMINUM
ALLOY 6061-T6
CR .063 STAINLESS
STEEL (-2 BOARD
THICKNESS ONLY)
DASH # MATERIAL
-5 .156(3.960) .29(7.37) .33(8.38)
.188(4.78)
.290(7.37)
.09(2.3)
A
B
.035(.89)
.220
(5.59)
.070
(1.78)
.130(3.30)
X .100(2.54)
TAB
10
.370(9.40)
.250(6.35)
.094
REF BOARD
THICKNESS
.140
(3.56) 1.00
(25.4)
1.50
(38.1)
.093(2.36)
.359(9.12)
+.003(.08)
-.001(.00)
ACTUATOR TAB OPTION BENT LEG OPTION
P.C. BOARD
MODIFICATION
ENGLISH LISTED FIRST
NOTE ON DIMENSIONS:
.XX (.X) =.02(.5)
.XXX(.XX)=.01(.25)
FOLLOWED BY METRIC
IN PARENTHESES
TOLERANCES:
UNLESS OTHERWISE SPECIFIED
FEATURES
■ Lever ratio: 4.17
■ Tab A option, initiates retain-
er release action
■ Maximum extraction force
per extractor obtained with
20 pounds finger force=50
pounds; for standard and
6061-T6 Aluminum Alloy
APPLICATIONS
■ Use with Series 24 Lok-
Tainer™ Retainer
■ Series 27 Lok-Tainer™
requires bent leg option of
-1 and -2 PCB's, also 127-2
Series
Meets the requirements of
drawing 84191, Defense Supply
Center, Columbus (DSCC)
WEIGHT
.05 ounce Aluminum
.15 ounce Stainless Steel
Series 71 Extractor Meets DSCC 84191
Part Number code
Series 71 Extractor x 71 -x -x -x -x -x -x -x
Straight Handle option
Select option (blank for none) _________ S
Material
Select From Materials Table __________________
Board Thickness
Select dash number from Board Thickness Table _____
Hand Action
Left hand action (see reference diagram on pg.28) ______ L
Right hand action (see reference diagram on pg.28) _____ R
Actuator Tab option
Select option (Blank for none) __________________________ A
Finish
Select dash number from Finish Table _______________________
Bent Leg option
Select option (Blank for none) ________________________________ BL
ESD Symbol E
SERIES 71 EXTRACTOR
