1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 1/19
COMPANY MEDIA CENTER CAREERS
Terms of Use »
Trademarks »
Privacy Statement »
Retail Product Warranty »
Commercial Product Warranty Policy »
Cookie Statement »
Evaluation Terms »
FSS Notification »
California Supply Chains Act »
Conditional Purchase Terms »
Terms and Conditions of Sale »
STAR Proof of Concept Service Policies »
COMMERCIAL
PRODUCT
WARRANTY POLICY
Limited Warranty for SanDisk Commercial Hardware Drive
Products
FOR HOME FOR BUSINESS OEM DESIGN ABOUT SANDISK SUPPORT
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 2/19
PLEASE CAREFULLY READ THE FOLLOWING TERMS AND
CONDITIONS BEFORE PURCHASING, OPENING, OR
OTHERWISE USING THE PRODUCT MANUFACTURED BY
SANDISK CORPORATION (“SANDISK”). YOUR USE OF THE
PRODUCT CONSTITUTES AGREEMENT WITH THE TERMS
AND CONDITIONS OF THIS SANDISK LIMITED WARRANTY
STATEMENT (“AGREEMENT”). IF YOU DO NOT AGREE TO THE
TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT
USE THE PRODUCT.
A. Warranty Information
1. This warranty ("Warranty") is provided by SanDisk Corporation
and its applicable subsidiary ("SanDisk"), is non-transferable, and
applies only to the SanDisk Commercial Hardware Drive Products
identified in the Table in Section F below (each, a "Product"). The
Warranty is provided solely to the original end user purchaser of
this Product or the original end user of a third party computer
system which contains the Product (“Customer”).
2. This Warranty does not cover purchases of the Products from a
Reseller by a party who is not intending to be the end user of the
product. The warranty and support for that product must be
initiated by the Reseller on that party’s behalf.
3. This Warranty does not cover counterfeit, fake, or grey market
products. SanDisk will not provide any support for any Products
(i) that SanDisk has not transported (or authorized for transport)
into the country of sale and/or (ii) that are not sold through
SanDisk authorized channels.
4. Each Product is intended only for commercial use and should
not be used by consumers or households. This Warranty does not
cover any personal non-commercial use of the Product. If you
have purchased this product from an authorized retail outlet for
personal non-commercial use, please refer to the applicable
provisions in the retail warranty for the Product found at
http://www.sandisk.com/wug.
5. If Customer’s Product includes separate standalone software
programs provided by SanDisk (e.g. SSD Dashboard, Crypto
Erase and FlashSoft), the use of those programs is governed by
the end user license agreement accompanying that program and
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 3/19
not this Agreement.
6. This version of the warranty applies to Products purchased by
Customer on or after December 1, 2015. For prior versions of the
SanDisk Limited Warranty, please contact SanDisk’s customer
service department (“Customer Service”) at the contact
information below.
B. Warranty Period Technical Support Information
1. Any technical support issues or warranty claims for the
Products that arise during the first ninety (90) days after delivery
to the Customer should be processed through the party from
whom Customer purchased the Product.
2. If the Product in question is already embedded or pre-installed
into a third-party device or computer system, Customer should
contact the manufacturer of record for the third-party product for
primary technical support and warranty claims.
3. If Customer purchased this product separately as an end user
or if the manufacturer of the third party computer system
containing the Product has identified the Product as the sole
source of the technical problem, then Customer may seek
technical support by contacting Customer Service within the
Warranty Period by email at support@SanDisk.com or at the
telephone number for Customer’s region found
at http://www.sandisk.com/about/contact.html. Such technical
support shall only address errors which are solely attributable to
the manufacture of the Product.
C. Warranty Terms
1. SanDisk warrants to Customer that this Product, excluding
content and/or software (if applicable) supplied with or within the
Product, will, during the applicable Warranty Period (as defined
below) specified below under normal use conditions, (a) be free
from material defects in material or workmanship and, (b) will
materially conform to SanDisk's published product specifications.
A Product will be considered to have a material defect or to be
materially defective only if such Product does not meet the stated
design lifetime (up to the applicable Warranty Period) and is
returned to the appropriate location within the Warranty Period
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 4/19
and subject to applicable performance threshold information
contained in the Product's datasheet (as produced or provided by
SanDisk).
2. This Warranty does not cover any damage to this Product
which results from accident, abuse, misuse, natural or personal
disaster, improper installation, the presence of a third party
product within a computer system, or any unauthorized
disassembly, repair or modification. It is possible for a Product to
be used under conditions which cause the media to wear out (and
the Warranty to expire) prior to the expiration of the stated time
period in the Warranty Period, as specified in the applicable
endurance specification.
3. In the event of a conflict between the terms of this Agreement
and any existing valid set of warranty terms between Customer
and SanDisk, the terms between Customer and SanDisk shall take
precedence over this Agreement. However, this Agreement shall
take precedence over the preprinted terms on all Customer forms
including, but not limited to, purchase orders issued by Customer.
D. Warranty Claims
1. To make a warranty claim, Customer may either (a) contact the
distributing or reselling party from which the purchase was made
("Reseller") within the Warranty Period and provide proof of
purchase and the returning party's original purchase status
(showing date, place of purchase and name of the Reseller as
applicable) and product name, type and number or (b) receive a
RMA number from SanDisk and follow SanDisk’s warranty return
procedures. Only the Customer is entitled to exercise the
Warranty, and such Customer must return the Product following
the guidelines listed by Reseller and/or SanDisk, including a
detailed statement of the problem sufficient to readily reproduce
the problem. SanDisk reserves the right, at its discretion, to direct
the Customer to return products through the Reseller.
2. A return may be required to another country other than the
country in which the Customer is located and/or purchased the
Product.
3. If Customer believes that any Product fails to comply with the
warranty and chooses to use SanDisk’s warranty procedures,
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 5/19
then Customer will abide by SanDisk’s then-current Return
Material Authorization (“RMA”) process and Customer shall
request an RMA number from Customer Service upon presenting
a summary of the defect. SanDisk will then issue an RMA number
to Customer, together with instructions on shipping to SanDisk
the Product believed by Customer to be defective. Customer will
return any such Product believed to be defective in an
appropriate container, which will conspicuously bear the RMA
number Customer obtains from SanDisk prior to return. Products
returned to SanDisk under this section, and any repaired or
replaced Products under this Exhibit, will be delivered to and
from SanDisk at SanDisk’s expense and risk. SanDisk (or a
contractor of SanDisk) shall assess the Product and, upon finding
a defect, process the return at SanDisk’s sole expense. If SanDisk
determines that a defect does not exist in such Product, Customer
will reimburse SanDisk for all expenses associated with the return
of such Product. Products improperly labelled, packaged or
shipped may result in a voiding of the warranty for that Product.
SanDisk is not responsible for damage incurred during shipping
to our RMA receiving locations.
4. SanDisk may elect to repair or replace any non-conforming
Product. Such replacement will be made with a new or
reconditioned Product of equal or greater functionality as the
returned Product. If SanDisk is not able to repair or replace the
non-conforming Product, or if such options are not commercially
reasonable, then SanDisk shall provide Customer a credit for the
non-conforming Product. The value of the credit shall be, at
SanDisk’s discretion, either (a) the replacement value of the non-
conforming Product or (b) the purchase value of the non-
conforming Product, prorated for the length of the warranty term
during which Customer was denied use of the Product. An
obsolete or discontinued product may be replaced with the same
Product or, if a replacement is not available, a Product having
similar function and capacity. Customer’s remedy under this
section may be conditioned on SanDisk’s requirement that the
Product be physically returned.
5. SanDisk is not responsible for any loss or damage to data as
part of the RMA process. Customer understands that SanDisk
may have inadvertent access to the data on the returned Product
during the RMA process. In order to protect sensitive data from
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 6/19
disclosure, SanDisk recommends deletion of as much sensitive
data from the Product as technically possible before sending the
Product for RMA processing. If it is not the case that all data is or
can be removed, the Customer shall indemnify, defend and hold
harmless SanDisk and the Reseller for any possible liability
associated with the potential presence in the returned Product of
sensitive and/or personal data, regardless of whether this data
relates to the Customer or any other third party.
6. SanDisk shall not be liable for (a) any incidental, indirect,
special, exemplary, punitive or consequential damages, including
but not limited to loss of profits and/or loss of data, other loss,
damage or expense directly or indirectly arising from any defect
or inability to use the Product or poor performance, either
separately or in combination with other equipment, regardless of
whether SanDisk or the Customer has been advised of the
possibility of such damages, nor (b) any amounts in the aggregate
in excess of the purchase price paid for the applicable Product(s).
SanDisk is not liable for and does not cover under this Warranty,
any costs associated with servicing and/or the installation of
SanDisk products, including the Product. This Warranty sets forth
the entire liability and obligations of SanDisk with respect to
defects, breach of warranty or any other failure to perform or
meet specification associated with any Products.
7. SanDisk products, including the Product, must not be used in
applications where failure could threaten injury or life, such as
aviation, automotive, nuclear, medical or life support systems (or
any other form of ultra-hazardous applications), and under no
circumstances shall SanDisk have any Warranty or other
obligations arising from any such Product uses.
E. DISCLAIMER
THE WARRANTY STATED HEREIN IS THE CUSTOMER’S SOLE
SOURCE OF WARRANTY RIGHTS ASSOCIATED WITH
PRODUCTS, AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED OR STATUTORY, INCLUDING,
WITHOUT LIMITATION, WARRANTIES OF FITNESS FOR
PARTICULAR PURPOSE, MERCHANTABILITY AND
NONINFRINGEMENT, ALL OF WHICH ARE HEREBY
DISCLAIMED. NO WARRANTY RIGHTS ARE GRANTED TO ANY
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 7/19
PARTY OTHER THAN THE CUSTOMER OF THE PRODUCT. THE
LAWS OF CERTAIN JURISDICTIONS MAY CONFER OTHER
RIGHTS WHICH ARE NOT AFFECTED BY THIS WARRANTY.
F. Warranty Period
1. The term of the Warranty ("Warranty Period") referred to above
is measured in calendar years and begins upon the shipment date
of the Product by SanDisk. Any “X” inside a SKU represents a
variable.
For the following group of products, The Warranty Period expires
at the end of the earlier of (a) the stated time period for the
Product identified below or (b) the point at which Customer’s use
of the Product exceeds the stated endurance limit, which is (i) the
time at which such Product’s total cumulative data (as recorded
on the Product’s S.M.A.R.T. attribute (E6h/230) “Media Wear Out
Indicator”) reaches 100% of the Product’s endurance value; or (ii)
the Product’s total physical Terabytes Written (TBW) as identified
in the table below or in the Specifications for the Product. In the
event of a conflict between the table below and the
Specifications, the Specifications shall take precedence.
Product
Family SKU Warranty
Length Endurance
U110 Half
Slim SATA
SSDs
SDSA6AM-008G
SDSA6AM-016G
SDSA6AM-032G
One (1)
year
See
Specifications
U110 mSATA
SSDs
SDSA6DM-016G
SDSA6DM-024G
SDSA6DM-032G
One (1)
year
See
Specifications
Extreme Pro
SATA SSDs
SDSSDXPS-960G-
G25
SDSSDXPS-480G-
G25
SDSSDXPS-240G-
G25
Ten (10)
years
80 TBW
Solid State
Drive SSDs
SDSSDP-128G-
G25
SDSSDP-064G-
Three (3)
years
See
Specifications
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 8/19
G25
U110 2.5"
SSDs
SDSA6GM-032G
SDSA6GM-064G-
1022
SDSA6GM-064G-
1122
SDSA6GM-128G-
1022
SDSA6GM-128G-
1122
Three (3)
years
See
Specifications
U110 mini
mSATA SSDs
SDSA6FM-016G
SDSA6FM-024G
SDSA6FM-032G
One (1)
year
See
Specifications
U110 m.2
SSDs
SDSA6MM-008G
SDSA6MM-016G
SDSA6MM-024G
SDSA6MM-032G
SDSA6PM-064G
SDSA6PM-128G
One (1)
year
See
Specifications
Ultra II SATA
SSDs
SDSSDHII-960G-
G25
SDSSDHII-480G-
G25
SDSSDHII-240G-
G25
SDSSDHII-120G-
G25
Three (3)
years
80 TBW
X110 mSATA
SSDs
SD6SF1M-256G-
1022
SD6SF1M-256G-
1022I
SD6SF1M-128G-
1022
SD6SF1M-128G-
1022I
SD6SF1M-064G-
1022
SD6SF1M-064G-
1022I
SD6SF1M-032G-
1022
Five (5)
years
See
Specifications
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 9/19
SD6SF1M-032G-
1022I
X110 2.5"
SSDs
SD6SB1M-064-
1022I
SD6SB1M-064G-
1022
SD6SB1M-128-
1022I
SD6SB1M-128G-
1022
SD6SB1M-256-
1022I
SD6SB1M-256G-
1022
Five (5)
years
See
Specifications
SD6SB1M-064G
SD6SB1M-128G
SD6SB1M-256G
One (1)
year
See
Specifications
X210 2.5"
SSDs
SD6SB2M-128G-
1022I
SD6SB2M-256G-
1022I
SD6SB2M-512G-
1022
Five (5)
years
80 TBW
X210 SATA
2.5"
SD6SB2M-128G
SD6SB2M-256G
SD6SB2M-512G
One (1)
year
80 TBW
X300s 2.5"
SSDs
SD7SB3Q-064G-
1022I
SD7SB3Q-064G-
1022
SD7SN3Q-064G-
1122
SD7UB2Q-010T-
1022
SD7UB2Q-010T-
1122
SD7UB2Q-512G-
1022
SD7UB2Q-512G-
1122
SD7UB3Q-128G-
Five (5)
years
80 TBW
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 10/19
1022
SD7UB3Q-128G-
1122
SD7UB3Q-256G-
1022
SD7UB3Q-256G-
1122
SD7UN3Q-128G-
1022
SD7UN3Q-256G-
1022
SD7UN3Q-512G-
1122
X300s SATA
2.5" SSDs
SD7SB2Q-010T
SD7SB2Q-512G
SD7SB3Q-064G
SD7SB3Q-128G
SD7SB3Q-256G
SD7UB2Q-512G
SD7UB3Q-128G
SD7UB3Q-256G
Three (3)
years
80 TBW
X300s M.2
SSDs
SD7SN3Q-064G
SD7SN3Q-128G
SD7SN3Q-256G
SD7SN3Q-512G
SD7UN3Q-128G
SD7UN3Q-256G
SD7UN3Q-512G
Three (3)
years
80 TBW
X300 2.5"
SSDs
SD7SB6S-128G
SD7SB6S-256G
SD7SB7S-010T
SD7SB7S-512G
SD7UB6S-128G
SD7UB6S-256G
SD7UB7S-512G
SD7SB7S-960G
Three (3)
years
80 TBW
SD7SB6S-128G-
1122
SD7SB6S-256G-
1122
SD7SB7S-010T-
Three (3)
years
80 TBW
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 11/19
1122
SD7SB7S-512G-
1122
SD7SF6S-128G-
1122
SD7SF6S-256G-
1122
X300 M.2
2280 SSDs
SD7SN6S-128G
SD7SN6S-256G
SD7SN6S-512G
SD7UN6S-128G
SD7UN6S-256G
SD7UN6S-512G
Three (3)
years
80 TBW
X300 mSATA
SSDs
SD7SF6S-128G
SD7SF6S-256G
Three (3)
years
80 TBW
SD7SF6S-512G-
1122
Five (5)
years
80 TBW
Z400s 2.5"
SSDs
SD8SBAT-256G-
1122 SD8SBAT-
128G
SD8SBAT-128G-
1122
Five (5)
years
72 TBW
SD8SBAT-064G
SD8SBAT-064G-
1122
Five (5)
years
40 TBW
SD8SBAT-032G
SD8SBAT-032G-
1122
Five (5)
years
20 TBW
Z400s
mSATA SSDs
SD8SFAT-128G
SD8SFAT-128G-
1122
Five
(5)years
72 TBW
SD8SFAT-064G
SD8SFAT-064G-
1122
Five
(5)years
40 TBW
SD8SFAT-032G
SD8SFAT-032G-
1122
Five
(5)years
20 TBW
Z400s M.2
2280 SSDs
SD8SNAT-256G
SD8SNAT-256G-
1122
SD8SNAT-128G
Five (5)
years
72 TBW
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 12/19
SD8SNAT-128G-
1122
SD8SNAT-064G
SD8SNAT-064G-
1122
Five (5)
years
40 TBW
Z400s M.2
2242 SSDs
SD8SMAT-128G
SD8SMAT-128G-
1122
Five (5)
years
72 TBW
SD8SMAT-064G
SD8SMAT-064G-
1122
Five (5)
years
40 TBW
SD8SMAT-032G
SD8SMAT-032G-
1122
Five (5)
years
20 TBW
Any Other
Non-
Customized
Commercially
Available
SanDisk SSD
XXXXXXXXXXXXXXOne (1)
year
See
Specifications
For the following group of products, The Warranty Period expires
at the end of the earlier of (a) the stated time period for the
Product identified below or (b) the point at which Customer’s use
of the product exceeds the stated maximum endurance limit,
which shall be measured by calculating the Product’s average
drive writes per day (DWPD) during the projected warranty length
of the Product as stated in the table below.
Product Family SKU Warranty
Length Endurance
Optimus
Extreme™ SAS
SSDs
SDLKOE9W-
100G-5CA1
SDLKOD9W-
200G-5CA1
SDLKOC9W-
400G-5CA1
SDLLOC9W-
800G-5CA1
Five (5)
years
45 DWPD
Optimus Ultra™
SAS SSDs
SDLKOEGW-
150G-5CA1
Five (5)
years
30 DWPD
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 13/19
SDLKODGW-
300G-5CA1
SDLKOCGW-
600G-5CA1
SDLLOCGW-
012T-5CA1
Optimus
Ascend™ SAS
SSDs
SDLKOEDM-
200G-5CA1
SDLKODDM-
400G-5CA1
SDLKOCDM-
800G-5CA1
SDLLOCDM-
016T-5CA1
Five (5)
years
10 DWPD
Optimus Eco™
SAS SSDs
SDLKOD6R-
400G-5CA1
SDLKOC6R-
800G-5CA1
SDLLOC6R-
016T-5CA1
Five (5)
years
3 DWPD
SDLLOC6R-
020T-5CA1
Five (5)
years
1 DWPD
Optimus MAX™
SAS SSD
SDLLOCDR-
038T-5CA3
SDLLOCDR-
038T-5CA1
Five (5)
years
0.5
DWPD
Lightning Ultra™
Gen. II SAS SSDs
SDLTMDKW-
200G-5CA1
SDLTMDKW-
400G-5CA1
SDLTMCKW-
800G-5CA1
Five (5)
years
25 DWPD
Lightning
Ascend™ Gen. II
SAS SSDs
SDLTODKM-
200G-5CA1
SDLTODKM-
400G-5CA1
SDLTODKM-
800G-5CA1
SDLTOCKM-
016T-5CA1
Five (5)
years
10 DWPD
Lightning Eco™ SDLTODKR- Five (5) 3 DWPD
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 14/19
Gen. II SAS SSDs 800G-5CA1
SDLTOCKR-
016T-5CA1
years
Lightning®Write-
Intensive SAS
SSDs
SDLB6HS-
200GC-00
SDLB6HS-
400GC-00
Five (5)
years
25 DWPD
Lightning Mixed-
Use SAS SSDs
SDLB6HM-
200GC-00
SDLB6HM-
400GC-00
SDLB6HM-
800GC-00
Five (5)
years
10 DWPD
Lightning Read-
Intensive SAS
SSDs
SDLB6JC-
400GC-00
SDLB6JC-
800GC-00
SDLB6JC-
016TC-00
Three (3)
years
1 DWPD
CloudSpeed
Ultra™ SATA
SSDs
SDLFOEAM-
100G-1HA1
SDLFODAM-
200G-1HA1
SDLFODAM-
400G-1HA1
SDLFOCAM-
800G-1HA1
Five (5)
years
3 DWPD
CloudSpeed
Ascend™ SATA
SSDs
SDLFOEAR-
120G-1HA1
SDLFODAR-
240G-1HA1
SDLFODAR-
480G-1HA1
SDLFOCAR-
960G-1HA1
Five (5)
years
1 DWPD
CloudSpeed
Eco™ SATA SSDs
SDLFNDAR-
240G-1HA2
SDLFNDAR-
480G-1HA2
SDLFNCAR-
960G-1HA2
Three (3)
years
1 DWPD
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 15/19
CloudSpeed Eco
Gen. II™ SSDs
SDLF1DAR-
480GC-1HA1
SDLF1DAR-
960GC-1HA1
SDLF1CRR-
019TC-1HA1
Three (3)
years
1 DWPD
ULLtraDIMM™
DDR3 SSDs
SDLOODFM-
200G-6KB1
SDLOOCFM-
400G-6KB1
Five (5)
years
10 DWPD
For the following group of PCIe products, the Warranty Period
expires at the end of the earlier of (a) the stated time period for
the Product identified below or (b) the point at which Customer’s
use of the product exceeds the stated maximum endurance limit,
which shall be measured by calculating the Product’s total
physical Petabytes Written (PBW) for normal use during the
projected warranty length of the Product as stated in the table
below. For users implementing solutions with multiple products,
the endurance ratings assume uniform distribution of writes
across all products.
Product
Family SKU Warranty
Length Endurance
ioFX 420GB SDFABAMOF-
420G-SF1
Five (5)
years
2 PBW
ioFX2 1.6TB SDFABAMOF-
1T65-SF1
Five (5)
years
8 PBW
ioFX2 410
GB
SDFABAMOF-
410G-SF1
Five (5)
years
2 PBW
Fusion
ioMemory
SX300-1300
SDFACAMOS-
1T30-SF1
Five (5)
years
4 PBW
Fusion
ioMemory
SX300-1600
SDFACAMOS-
1T60-SF1
Five (5)
years
5.5 PBW
Fusion
ioMemory
SX300-3200
SDFACAMOS-
3T20-SF1
Five (5)
years
11 PBW
Fusion
ioMemory
SDFACCMOS-
6T40-SF1
Five (5)
years
22 PBW
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 16/19
SX300-6400
Fusion
ioMemory
SX350-1300
SDFADAMOS-
1T30-SF1
Five (5)
years
4 PBW
Fusion
ioMemory
SX350-1600
SDFADAMOS-
1T60-SF1
Five (5)
years
5.5 PBW
Fusion
ioMemory
SX350-3200
SDFADAMOS-
3T20-SF1
Five (5)
years
11 PBW
Fusion
ioMemory
SX350-6400
SDFADCMOS-
6T40-SF1
Five (5)
years
22 PBW
Fusion
ioMemory
PX600-1000
SDFACAMOP-
1T00-SF1
Five (5)
years
12 PBW
Fusion
ioMemory
PX600-1300
SDFACAMOP-
1T30-SF1
Five (5)
years
16 PBW
Fusion
ioMemory
PX600-2600
SDFACAMOP-
2T60-SF1
Five (5)
years
32 PBW
Fusion
ioMemory
PX600-5200
SDFACCMOP-
5T20-SF1
Five (5)
years
64 PBW
Appliance Warranty Information
For the following group of InfiniFlash products, the Warranty
Period for the chassis expires at the end of the stated time period
for the Product identified below. For the Icechip, the Warranty
Period expires at the end of the earlier of (a) the stated time period
for the Product identified below or (b) the point at which
Customer’s use of the product exceeds the stated maximum
endurance limit, which shall be measured by calculating the
Product’s total physical Petabytes Written (PBW) for normal use
during the projected warranty length of the Product as stated in
the table below. The endurance ratings assume uniform
distribution of writes across all Icechips.
Product
SKU
Warranty Icechip Appliance
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 17/19
Family Length EnduranceEndurance*
InfiniFlash
100 Series
SDIF100-
2Y1M0000
SDIF100-
2Y1F0000
SDIF100-
2Y2M0000
SDIF100-
2Y2F0000
SDIF100-
2Y4M0000
SDIF100-
2Y4F0000
SDIF100-
2Y8M0000
SDIF100-
2Y8F0000
Three (3)
years
35 PBW 2.3 EBW
InfiniFlash
500 Series
SDIF500-
2Y1M0000
SDIF500-
2Y1F0000
SDIF500-
2Y2M0000
SDIF500-
2Y2F0000
SDIF500-
2Y4M0000
SDIF500-
2Y4F0000
SDIF500-
2Y8M0000
SDIF500-
2Y8F0000
Three (3)
years
35 PBW 2.3 EBW
InfiniFlash
700 Series
SDIF700-
2Y1M0000
SDIF700-
2Y2M0000
SDIF700-
2Y4M0000
SDIF700-
2Y8M0000
SDIF700-
Three (3)
years
35 PBW 2.3 EBW
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 18/19
SDIF700-
2Y1M0000
SDIF700-
2Y2M0000
SDIF700-
2Y4M0000
SDIF700-
2Y8M0000
* Appliance Endurance ratings are calculated by extrapolating the
physical Exabytes written (EBW) across sixty-four Icechips under
normal use with a uniform distribution of writes over the length of
the warranty.This information is provided for informational
purposes only and is not a metric by which the Warranty Period is
measured.
If your Product is purchased from an OEM, and your Product’s
SKU is not present on any table in this Warranty, contact your
OEM to determine the warranty length on your Product.
G. Product Datasheets & Specification
The product datasheets and specifications for the Products can
be found on sandisk.com. If the datasheet and specifications for
the Product cannot be found on sandisk.com, please contact
SanDisk Customer Service to obtain a copy of the documents.
Please direct all questions concerning use of this warranty to:
SanDisk Corporation, 951 SanDisk Drive, Milpitas, CA 95035;
Attention: Commercial Legal Department.
Version 12.2015
#SANDISKSTORIES
Submit your photos and take part in the
storytelling experience. Just tag your
Site Menu
For Home
Retail
Support
Quick Assist
1/6/2016 Commercial Product Warranty Policy
https://www.sandisk.com/about/legal/commercial-product-warranty-policy 19/19
photos with #sandiskstories on Twitter
and Instagram. Learn More »
For Business
OEM Design
Media
Center
Careers
Investor
Relations
Contact Us
Ask a
question
Chat with
experts
Register your
product
RMA
Request
Check RMA
Status
Forums
Next
Event:
Embedded
World
February 23 -
February 25
|Nuremburg,
Germany
Learn More »
All Events »
Next
Event:
Open Compute
March 09 -
March 10 |San
Jose, CA, United
States
Learn More »
All Events »
© 2016 SanDisk Corporation All rights reserved.
Legal Terms of Use Trademarks Privacy Cookies About Ads California Supply Chains Act
