Catalog 65839 Revised 12-98 MULTILOCK Cannectors 070 Series Receptacle Contact and Plug Housing for Wire Application 16 Features = Small yet durable wire-to- wire and wire-to-board connectors = Housing lance design = Contacts have no lance and do not tangle with one another, making handling easier = Consist of plug and cap connectors for wire termination and cap housing assembly for horizontal and vertical Mounting on the printed circuit board. = Receptacle contact has leaf with contacting points protected by a box-shaped shroud; highly resistant to damage from outside. = Both plug and cap housings have an integral double- lock mechanism, on the wire side. = Board-mount cap housing assembly available in two types, vertical mount and horizontal mount. Preloaded with posted tab contacts. a Mark Il plug connector is AMP 070 Series MULTILOCK Connecters are a miniaturized high-density wir-to-wire and wit-to-board connector. The connectors consist of a plug housing with receptacle contacts and a cap housing with tab contacts for wire termination, and a cap housing assembly which can dependable, and pevent contacts from being damaged by rocking (KOUIR Action) at mating/unmating. For the piug hcusing, there is a MARK II version which has a two-piece type dauble-lock plate embedded into the body. This Mark Il plug housing Performance Data Low level termination resistance: 3m0) max. (initial) 10mQ max. (final) Overall termination resistance: 3m max. (initial) tam max.(final? Insulation resistance: also available which has a orclit need athe cane uses the same recestacle 10CMQ min. double-lock plate ; TENG contacts. ard sare mating Withstanding voltage: assembled into ihe body. or horizontally. 9 voltag = Hybrid type connector Tne plug and cap connectors for wire terminacion are 3! cap housing, as the con- ventional standard plug 1,800V AC/one minute Contact retention foree: (wire to-wira) is also housing lance design. Tre nossa. 8kg min avaliable with signal and Sign. The cap rousing assembly Operating temperature: power circuits mixed within feCedtacle and tab contacts tyr Gard mounting is avail vn ~ Mone One housing. Product Specification: 108-5216 {wire ta PCS} 108-4264 (wire to wire) Crimp Specification: 14-5091 (Receplacle} 114-5092 (Tab) used i71 these conrectors have no lance and therefore there is no possibility of conlacts being angled with one another or of contact lances being deformed. Contacts are of crimp, snap-in type. Tre receptacle contact has a leaf wih con- tacting points protected by a box-shaped shroud. It is strong and h ghly resistant to damage from outside. Bott the plug and cap housings have an integral double-lock mechanism for positive contact loading Despite their small size, the housings are durable ard able in wo tyces. vertical mount ard horizontal! rrount. To this 070 Series MULTILOCK Connectors a hybrid type wire-to-wre connector containing a mixture of signal circuits (070 Series) and power circuits in one housing has now been added. Standard C70 Series contacts are used for signal circuits, while 250 Series contacts without atch are used for power circuits Nole: For performance specifications of -he hybrid type connector, contact our Sales Department. www.amp.com 1-800-522-6752 Product Irformation Center/AMP FAX Sevics 1-800-722-1111 looling/leconecal Assistance Center Specitications subject to change