XP100200S-03R - e2v - Datasheet.Live

1

Subject to change without notice.

www.cree.com/xlamp

Data Sheet: CLD-DS28 Rev 0

Cree® XLamp® MX-3 LEDs

Data Sheet

The Cree XLamp MX-3 LED provides the proven lighting-class performance and

reliability of Cree XLamp LEDs in a at-top PLCC package. The XLamp MX-3 LED

continues Cree’s history of innovation in LEDs for lighting applications with wide

viewing angle, unlimited oor life, uniform light output without secondary optics and

electrically neutral thermal path.

The XLamp MX-3 LED brings high performance and quality of light to a wide range

of lighting applications, including linear lighting, LED light bulbs, uorescent retrots

and retail-display lighting.

Table of Contents

Flux Characteristics (TJ = 25°C) .................................................................................................................2

Characteristics ........................................................................................................................................2

Relative Spectral Power Distribution ...........................................................................................................3

Relative Flux vs. Junction Temperature (IF = 350 mA) ...................................................................................3

Electrical Characteristics (TJ = 25°C) ..........................................................................................................4

Relative Flux vs. Current (TJ = 25°C) .........................................................................................................4

Thermal Design .......................................................................................................................................5

Typical Spatial Distribution ........................................................................................................................5

Reow Soldering Characteristics ................................................................................................................6

Notes .....................................................................................................................................................7

Mechanical Dimensions (TA = 25°C) ...........................................................................................................8

Tape and Reel .........................................................................................................................................9

Packaging ............................................................................................................................................. 10

FEATURES

• Available in white (2,600 K to 8,300 K CCT)

• Maximum drive current: 400 mA

• Wide viewing angle: 120°

• Electrically neutral thermal path

• Qualication at max drive current

• RoHS-compliant

• Unlimited oor life at ≤ 30°C/85% RH

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

2CLD-DS28 Rev 0

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

Flux Characteristics (TJ = 25°C)

The following table provides several base order codes for XLamp MX-3 LEDs. It is important to note that the base order

codes listed here are a subset of the total available order codes for the product family. For more order codes, as well

as a complete description of the order-code nomenclature, please consult the XLamp MX-3 LED Binning and Labeling

document.

Color

CCT Range

Base Order Codes

Min Luminous Flux

(lm) @ 350 mA

Calculated

Min Luminous

Flux (lm)

@ 300 mA* Order Code

Min. Max. Group Flux (lm) Flux (lm)

Cool White 5,000 K 8,300 K

Q5 107 93.9 MX3AWT-A1-0000-000D51

R2 114 100 MX3AWT-A1-0000-000E51

Warm White

3,700 K 4,300 K Q4 100 87 MX3AWT-A1-0000-000CE5

2,600 K 3,700 K Q3 93.9 82 MX3AWT-A1-0000-000BE7

* Calculated values for reference purposes only.

Notes:

• Cree maintains a tolerance of +/- 7% on ux measurements.

• Typical CRI for Cool White (4,300 K – 8,300 K CCT) is 75.

• Typical CRI for Warm White (2,600 K – 4,300 K CCT) is 80.

Characteristics

Characteristics Unit Minimum Typical Maximum

Thermal resistance, junction to solder point °C/W 11

Viewing angle (FWHM) degrees 120

ESD classication (HBM per Mil-Std-883D) Class 2

DC forward current mA 400

Forward voltage (@ 350 mA) V 3.7 4.0

LED junction temperature °C 150

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

3CLD-DS28 Rev 0

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

Relative Spectral Power Distribution

Relative Flux vs. Junction Temperature (IF = 350 mA)

Relative Spectral Power

0

20

40

60

80

100

400 450 500 550 600 650 700 750

Relative Radiant Power (%)

Wavelength (nm)

5000K - 8300K

CCT

3500K - 5000K

CCT

2600K - 3500K

CCT

Relative Flux Output vs. Junction Temperature

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

25 50 75 100 125 150

Relative Luminous Flux

Junction Temperature (ºC)

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

4CLD-DS28 Rev 0

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

Electrical Characteristics (TJ = 25°C)

Relative Flux vs. Current (TJ = 25°C)

Electrical Characteristics (Tj = 25ºC)

0

50

100

150

200

250

300

350

400

2.50 2.75 3.00 3.25 3.50 3.75 4.00 4.25 4.50

Forward Current (mA)

Forward Voltage (V)

Relative Intensity vs. Current (Tj = 25ºC)

0

20

40

60

80

100

120

140

160

0 50 100 150 200 250 300 350 400

Relative Luminous Flux (%)

Forward Current (mA)

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

5CLD-DS28 Rev 0

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

Thermal Design

The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is

crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to

ambient in order to optimize lamp life and optical characteristics.

Typical Spatial Distribution

Thermal Design

0

50

100

150

200

250

300

350

400

450

0 25 50 75 100 125 150

Maximum Current (mA)

Ambient Temperature (ºC)

Rj-a = 15°C/W

Rj-a = 20°C/W

Rj-a = 25°C/W

Rj-a = 30°C/W

Typical Spatial Radiation Pattern

0

20

40

60

80

100

120

-100 -80 -60 -40 -20 0 20 40 60 80 100

Relative Luminous Intensity (%)

Angle (º)

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

6CLD-DS28 Rev 0

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

Reow Soldering Characteristics

In testing, Cree has found XLamp MX-3 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed

below. As a general guideline, Cree recommends that users follow the recommended soldering prole provided by the

manufacturer of solder paste used.

Note that this general guideline may not apply to all PCB designs and congurations of reow soldering equipment.

Prole Feature Lead-Based Solder Lead-Free Solder

Average Ramp-Up Rate (Tsmax to Tp) 3°C/second max. 3°C/second max.

Preheat: Temperature Min (Tsmin) 100°C 150°C

Preheat: Temperature Max (Tsmax) 150°C 200°C

Preheat: Time (tsmin to tsmax) 60-120 seconds 60-180 seconds

Time Maintained Above: Temperature (TL) 183°C 217°C

Time Maintained Above: Time (tL) 60-150 seconds 60-150 seconds

Peak/Classication Temperature (Tp) 215°C 260°C

Time Within 5°C of Actual Peak Temperature (tp) 10-30 seconds 20-40 seconds

Ramp-Down Rate 6°C/second max. 6°C/second max

Time 25°C to Peak Temperature 6 minutes max. 8 minutes max.

Note: All temperatures refer to topside of the package, measured on the package body surface.

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

7CLD-DS28 Rev 0

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

Notes

Moisture Sensitivity

In testing, Cree has found XLamp MX-3 LEDs to have unlimited oor life in conditions ≤30ºC / 85% relative humidity

(RH). Moisture testing included a 168 hour soak at 85ºC / 85% RH followed by 3 reow cycles, with visual and electrical

inspections at each stage.

RoHS Compliance

The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other-

wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold

limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/

EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as

amended through April 21, 2006.

Vision Advisory Claim

Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

8CLD-DS28 Rev 0

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

Mechanical Dimensions (TA = 25°C)

All measurements are ±.13 mm unless otherwise indicated.

Top View

Bottom View Side View

Top View

Recommended MCPCB Solder Pad Alternative Solder Pad

Recommended FR4 Solder Pad

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

9CLD-DS28 Rev 0

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

Tape and Reel

All dimensions in mm.

Loaded Pockets

(1,000 Lamps)

Leader

400mm (min) of

empty pockets with

at least 100mm

sealed by tape

(50 empty pockets min.)

Trailer

160mm (min) of

empty pockets

sealed with tape

(20 pockets min.)

START

END

Cathode Side

Anode Side

(denoted by + and circle)

160.0

A

B

2.5

±.1

SECTION A-A

SCALE 2 : 1

1.5

±.1

8.0

±.1

4.0

±.1

1.75

±.10

12.0 .0

+

.3

DETAIL B

SCALE 2 : 1

13

mm

7"

Cover Tape

Pocket Tape

User Feed Direction

START

END

User Feed Direction

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

10 CLD-DS28 Rev 0

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

Packaging

All dimensions in mm.

CREE Bin Code

& Barcode Label

Vacuum-Sealed

Moisture Barrier Bag

Label with Customer

P/N, Qty, Lot #, PO #

Label with Cree Bin

Code, Qty, Lot #

Label with Cree Bin

Code, Qty, Lot #

Vacuum-Sealed

Moisture Barrier Bag

Patent Label

Label with Customer Order

Code, Qty, Reel ID, PO #

CREE Bin Code

& Barcode Label

Vacuum-Sealed

Moisture Barrier Bag

Label with Customer

P/N, Qty, Lot #, PO #

Desiccant

(inside bag)

Humidity Indicator

(inside bag)

Label with Cree Bin

Code, Qty, Lot #

Label with Cree Bin

Code, Qty, Lot #

Vacuum-Sealed

Moisture Barrier Bag

Dessicant

(inside bag)

Humidity Indicator

Card (inside bag)

Patent Label

Label with Customer Order

Code, Qty, Reel ID, PO #

Label with Customer Order Code,

Qty, Reel ID, PO#

Label with Cree Bin Code,

Qty, Lot #