Radial Lead Fuses TE5(R) > Time-Lag > 369 Series 369 Series, TE5(R), Time-Lag Fuse Description TE5(R)(+$* &27.$ 0 2$# ,##$1(&,$#(, ""-0# ,"$ 2- Features 8 Lead-free 8 ,2$0, 2(-, **7 ..0-4$# 8 $#3"$#1. "$ 0$/3(0$+$,21 8 -5(,2$0, *0$1(12 ,"$ 8 (0$"21-*#$0 !*$-0 .*3&(,4$01(-,1 8 (!0 2(-,0$1(12 ,2 8 '-")1 %$" 1(,& 8 *-&$,%0$$ Agency Approvals Applications Agency Agency File Number Ampere Range 8 *$"20-,(" ** 12 + % of Ampere Rating Opening Time % -30(,(+3+ % 1$" 6(+3+ % 369 Series Electrical Characteristics for Series +1(,1$" 6 % +1(, 1$" 6 +1(, +1 6 Electrical Characteristics Specifications by Item Voltage Drop 1.0 x IN max. (mV) Power Dissipation 1.5 x IN max. (mW) Melting Integral 10 x IN min. (A2s) 300 110 280 3.80 X 300 115 400 5.80 X X X 1.60 300 95 600 13.50 X X X 1200 2.00 300 90 700 21.00 X X X 1315 3.15 300 80 1100 55.00 X X X 1400 4.00 300 75 1200 100.00 X X X 1500 5.00 300 70 1000 90.00 X X X 1630 6.30 300 65 1200 126.00 X Amp Code Amp Rating (A) Voltage Rating (V) 0800 0.800 1100 1.00 1160 Breaking Capacity 50A@300VAC 50-60Hz/cos =1 (c) 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/369.html for current information. 163 Revised: March 10, 2011 Agency Approvals X 369 Series Fuses Introduction toRadial CircuitLead Protection TE5(R) > Time-LagTransientology > 369 Series Temperature Rerating Curve Average Time Current Curves 6.3A 5A 4A 3.15A 2.5A 2A 1.6A 1.25A 1A .800A 100000 10000 1000 TIME IN SECONDS 100 10 1 0.1 0.01 0.001 0.1 1 10 100 1000 CURRENT IN AMPERES Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 220 Preheat: 200 (Depends on Flux Activation Temperature) 180 160 140 120 80 60 40 Lead-Free Recommendation (Typical Industry Recommendation) Temperature Minimum: 100 C Temperature Maximum: Preheat Time: 150 C 60-180 seconds 100 Solder Pot Temperature: 260 C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (C) - Measured on bottom side of board 300 Time (Seconds) Solder Iron Temperature: 350 C +/- 5C Heating Time: 5 seconds max. Cooling Time Preheat Time Dwell Time Note: These devices are not recommended for IR or Convection Reflow process. 369 Series 164 (c) 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/369.html for current information. Radial Lead Fuses TE5(R) > Time-Lag > 369 Series Product Characteristics Base/Cap: Brown Thermoplastic Polyamide PA6.6, UL 94 V0 Round Pins: Tin-plated Copper Materials Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260C, 3s (Wave) 350C, 1s (Soldering Iron) Soldering Heat Resistance 260C, 10s (IEC60068-2-20) 350C, 3s (Soldering Iron) Operating Temperature -40C to +85C (considerde-rating) Climatic Category -40C / +85C / 21days (EN60068-1,-2-1,-2-2,-2-78) Stock Condition +10C to +60C relative humidity 75% yearly average, without dew, maximum value for 30 days-95% Vibration Resistance 24 cycles at 15min. Each (EN60068-2-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10g acceleration Dimensions Part Numbering System max.4 8.5 369 xxxx 0000 max. 8 Series Amp Code Refer to Amp Code column of Electrical Characteristics Table 1.5 Packaging Code 369 Series 0000 Tape/Ammopack (1,400pcs.) 0440 Short Leads - Bulk (1,400pcs.) 1 + 0.1 2 0.5 min 0.6 5.08 Holes in PCB Long Leads (L=18.8mm) Short Leads (L=4.3mm) Packaging 369 Series Tape & Ammopack Short Leads N/A N/A (c) 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/369.html for current information. 1,400 1,400 165 0000 0440 N/A N/A 369 Series