Emboss Tape SHL CONNECTOR 1.0mm pitch/Disconnectable Crimp style connectors Specifications ------------------- * Current rating: 1.0 A AC, DC (AWG #28) * Voltage rating: 50 V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 20 m max. After environmental tests/ 40 m max. * Insulation resistance: 100 M min. * Withstanding voltage: 500 VAC/minute * Applicable wire: AWG #32 to #28 * In using the products, refer to "Handling Precaution for Terminal and Connector" described on our website (Technical documents of Product information page). * Contact JST for details. * RoHS2 compliance. Standards ---------------------- * Thin design * Low insertion force * Deformation preventive design 0 Recognized E60389 PC board layout and Assembly layout Normal type Offset type 0.6 1 1 1.2 4.3 1.4 5.1 3.85 1.7 4.50.1 1.8 0.7 0.9 1 Header outline 7.2 0.7 4.3 4.6 3.35 1.7 7.2 0.7 0.6 PC board Header outline 1.55 1.6 0.9 Note: 1. The above figure is the figure viewed from the connector mounting side. 2. Tolerances are non-cumulative: 0.05 mm for all centers. 3. The dimensions above should serve as a guideline. Contact JST for details. Contact Model No. mm2 SSHL-003T-P0.2 0.0320.08 Applicable wire Insulation O.D. (mm) AWG# 3228 0.40.8 Q'ty/ reel 41,000 Material and Finish 4.75 Phosphor bronze, tin-plated (reflow treatment) 2 0.5 0.8 0.8 2.35 RoHS2 compliance Note: Contact JST for gold-plated products. 0.4 Contact Crimping machine Crimp applicator SSHL-003T-P0.2 AP-K2N MKS-L-10-3 *MKS-SC Applicator Dies Crimp applicator with dies MK/SSH/L-003-02 APLMK SSH/L003-02 SC/SSH/L-003-02 APLSC SSH/L003-02 Note: *Strip-crimp applicator Contact JST for applicable wires in case that it is not usable due to wire size. 1 SHL CONNECTOR Housing Circuits 2 5 Marking by every 5 circuit 6 Circuit No.1 mark 7 1.75 8 10 2.9 11 12 5.7 14 16 20 22 26 1 1.15 30 Dimensions (mm) A B Model No. With protrusions SHLP-02V-S-B SHLP-05V-S-B SHLP-06V-S-B SHLP-07V-S-B SHLP-08V-S-B SHLP-10V-S-B SHLP-11V-S-B SHLP-12V-S-B SHLP-14V-S-B SHLP-16V-S-B SHLP-20V-S-B SHLP-22V-S-B SHLP-26V-S-B SHLP-30V-S-B Q'ty/box 1.0 4.6 6,000 4.0 7.6 3,000 5.0 8.6 3,000 6.0 9.6 3,000 7.0 10.6 3,000 9.0 12.6 2,000 10.0 13.6 2,000 11.0 14.6 2,000 13.0 16.6 2,000 15.0 18.6 1,000 19.0 22.6 1,000 21.0 24.6 1,000 25.0 28.6 1,000 29.0 32.6 1,000 A Material and Finish B PBT, UL94V-0, natural (white) RoHS2 compliance Shrouded header Model No. Normal type Circuits B A 4.3 0.7 1.75 1 Circuit No.1 Offset type Normal type Offset type Insulation O.D. (mm) Q'ty/ Normal type Offset type reel A B A B 1.0 -- 4,500 4.8 -- 2 SM02B-SHLS-TF -- 5 SM05B-SHLS-TF -- 4.0 7.8 -- -- 4,500 6 SM06B-SHLS-TF -- 5.0 8.8 -- -- 4,500 7 SM07B-SHLS-TF -- 6.0 9.8 -- -- 4,500 8 SM08B-SHLS-TF SM08B-SHLS-1-TF 7.0 10.8 7.0 12.0 4,500 10 SM10B-SHLS-TF -- 9.0 12.8 -- -- 4,500 11 SM11B-SHLS-TF -- 10.0 13.8 -- -- 4,500 12 SM12B-SHLS-TF -- 11.0 14.8 -- -- 4,500 14 SM14B-SHLS-TF SM14B-SHLS-1-TF 13.0 16.8 13.0 18.0 4,500 16 SM16B-SHLS-TF 20 SM20B-SHLS-TF SM20B-SHLS-1-TF 19.0 22.8 19.0 24.0 4,500 -- 15.0 18.8 -- -- 4,500 22 SM22B-SHLS-TF -- 21.0 24.8 -- -- 4,500 B 26 SM26B-SHLS-TF -- 25.0 28.8 -- -- 4,500 A 30 SM30B-SHLS-TF -- 29.0 32.8 -- -- 4,500 1 4.3 1.2 1.4 1.4 1.75 Material and Finish Contact: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment) Housing: PA, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) Circuit No.1 RoHS2 compliance This product displays (LF)(SN) on a label. Note: Contact JST for the headers with gold-plated pins. 2