Vega Series Multiple Output Modular Power Supply 450W, 650W & 900W Output Power Levels Industry Leading 8W / cu. in Power Density* Monitoring Signals Forward/Reverse/Low Noise/System Air Cooling 1-10 Wide Range Outputs With Adjustment Output Voltages From 0.25V - 62V 48VDC Input Option Medical UL2601/IEC601 Approvals * 900W model system air version Ve g a F e a t u r e s a n d B e n e f i t s Feature Benefit PFC compliant to EN61000-3-2 Input transient protection per EN61000-4 Wide Range Output Adjustment Safety Agency Approvals EN, cULus, BSI, CE Forward/Reverse/Low Noise/System Air Cooling 3-yr warranty Flexibility with option choices Supports global use Designed to withstand power surges in harsh operating environments Capable of providing non-standard voltages, eliminating the need for custom models Supports worldwide use, lowers risk to end user Flexible cooling configurations for optimized operation Low cost of ownership Custom solutions available off the shelf Specifications MODELS ITEMS Input Voltage Range(1) Input Current (Typ. at 90VAC) Efficiency (Typ.) Nominal Output Voltages Output Voltage Adjustment Minimum Load Max Output Power Max Ripple & Noise (pk-pk) Regulation (load, line, cross) Hold Up Time Over Voltage Protection Overload/Short Circuit Remote ON/OFF Control Remote Sense Isolation Conducted EMI Radiated EMI Operating Temperature Cooling Dynamic Load Response Regulatory Agency Compliance (601-1 not available on 48V input) Vibration Shock Switching Frequency Weight (Typ.) Size (LxWxH) Warranty VEGA 450 VEGA 650 - VEGA 900 90 - 264VAC 47-63Hz(2) 90-264VAC 47-63Hz(2) 150-264VAC 47-63Hz(2) or 34-75VDC A 7.7A 11A 9.2A at 150VAC % 75% at 230VAC (or 48VDC) and full load, configuration dependent VDC 0.25 - 62 Wide range, via potentiometer or remote adjust pin, module dependent A 0A 650 900 W 450(3) mV <1% (or 50mV which ever is greater) using EIAJ test method & 20MHz bandwidth % Less than 0.5% ms 16ms min at 90VAC (150VAC for 900W, 10ms for 450WDC input) and full load % 120 - 130% typical, Vout>4.1V ; 140 - 150% typical, Vout<=4.1V, latching % 105-125% of rated current, constant current characteristic, 150% max short circuit current. A TTL compatible signal will turn ON/OFF all output modules (optional) V Compensates for total of 0.75 volts total line drop (optional on dual output modules) Input-Output 5.3kV(DC); Input-Ground 2.3kV(DC); Output-Ground 200V(DC) EN55022 Class B, (as per CISPR .22), Class A for 48V input EN55022 Class B, (as per CISPR .22) C 0C to 50C, derate ea. output @ 2.5%/C from 50C to 65C.(4) Consult factory for 70C operation. -20C startup requires a 30 min. warm-up period. Forced Air Cooled <6% or 300mV of set voltage for 50% load change (above 25% load), recovery to within 1% of nominal within 500 microseconds. UL60950-1, CSA 22.2 No 60950-1, EN60950-1, IEC60950-1, IEC60601-1, EN60601-1, UL2601-1, CE Mark for LVD. G 2G, 10-200Hz sweep for 1hr to search for resonant. 6G random, 6-Axis to IEC68-2-64 G 20G per IEC68-2-27 KHz 200 lbs 3.0 lbs. + 0.25 lbs. / used slot; maximum # of slots =5 in(mm) 10.6" x 5" x 2.5" (268.4mm x 127mm x 63.5mm) 3 Years Consult datasheet and application notes for detailed specifications and test methods. (1) 440Hz with reduced PFC, consult factory (2) Will operate with 130-330VDC (3) DC Input <44V input 370W (4) 450WDC 1.5%/C 3055 Del Sol Blvd * San Diego, CA 92154 * 1-800-LAMBDA-4 Vega Series Single Output Module Selection Configuring Guide Choose your options for boxes A through E. Select output voltage, single or dual output module code from the tables below, and options (if required) A maximum of 5 module slots may be used. List actual output voltages required to have them pre-set by the factory. Choose the following power supply options. V A B C D E Primary Options (Leave empty if not required) F AC Fail, Global/fan Inhibit, 5V/100mA standby FV AC Fail, Global/fan Inhibit, 5V/300mA standby xFW AC Fail, Global/fan Inhibit, 5-15V/1A standby E AC Fail, Global/fan Enable, 5V/100mA standby EV AC Fail, Global/fan Enable, 5V/300mA standby xEW AC Fail, Global/fan Enable, 5-15V/1A standby 5,7 5,7 (5) Specify value of x from 5-15V. (Increase leakage current by 90A.) Input Filter Choice* S 1.5 mA max M 500 A max L 300 A max R 100 A max T 50 A max Input Connection F Fast on terminals (6) S Screw terminals I Switched IEC 320 Connector (6) Cooling F Standard forward air fan Q Quiet fan, forward air (7) R Standard reverse air fan P Quiet fan, reverse air (6) (7) C** Customer air (no fan) Output Power 0 450W DC Input 4 450W 6 650W 9 900W * Max Leakage calculated at 264VAC, 63Hz. Note: Contact Lambda Technical Support for non-standard leakage options emissions compliance. ** Thermocoupled evaluation unit recommended. Consult sales office. (6) Not available on 900W Model (7) Not available on 450WDC Model (8) Only available on 900W Model Call 1-800-LAMBDA-4 for additional technical support or visit www.lambdapower.com/products/vega-series.htm Amp Slots 20A 35A 40A 50A 60A 80A 95A 114A 20A 35A 45A 50A 60A 66A 75A 95A 104A 25A 12A 18A 24A 40A 45A 45A 18A 1 1 1 1.5 2 2 3 4 1 1 1.5 1.5 2 2 2 3 3.5 1 1 1 1.5 2 3 4 1.5 Module E4 E3H C4 CC3 E5L B5 C5 D5 E5H Z19(8) HH5/3 DD4 EE4(8) HH5/4 BB4 EE5L(8) C5B4 EE5H(8) CC5 DD5 Output Connection Fast on terminals F Screw terminals S Vout Conn. Module Opt. Example 12B3SN: 12V @ 12A single output module, screw terminal outputs, inhibit option Remote sense is standard on single output modules, optional on duals Dual Output Module Selection V1 V2 Module Conn. Opt. / Output Connection Fast on terminals F Screw terminals S Output Options Inhibit, module good, and remote sense N Remote sense R (Leave empty if not required) Example 3.3/12H1L/3FR: 3.3V @ 12A and 12V @ 6A output, fast on output terminals and remote sense option. Full Description Example: V4FSSFV 5L1S 3.3E1SN 15/15H3/3SR 450W power supply with standard forward air fan, screw terminal input connections, 1.5mA leakage input filter, AC fail with Global/fan inhibit & 5V @ 300mA aux. supply option with the following outputs: 5V @ 35A Screw terminal connections with remote sense standard 3.3V @ 60A Screw terminal connection with output inhibit, module good, and current share options, remote sense standard 15V @ 10A Screw terminal connection with remote sense option (1st half of dual) 15V @ 6A Screw terminal connection with remote sense option (2nd half of dual) Note the module descriptions are to be used as listed in the module tables. Vega Output Modules Vega Output Modules Module V Range Single Output B1L 1.8-3.8V C1 1.8-4.1V C1Y 1.8-4.1V D1L 1.8-3.8V E1 1.8-3.8V F1(6) 1.8-3.8V Z2 1.8-3.8V Z3 1.8-3.8V B1H 3.9-5.5V L1 4.2-5.5V D2 3.8-9V D1H 3.9-5.5V E2 3.8-8V Z18 4.2-5.5V (6) F2 3.8-8V Z4 3.9-5.5V Z6 3.9-5.5V B2 5-9V B3 9.1-16.2V C3 9.1-16.2V D3 8-16.5V E3L 8-13.9V Z7 8-16.5V EE2 7.6-16V D4 14-21.5V Output Options (Leave empty if not required) Inhibit, module good, and current share N V Range Amp Slots 14-19.9V 14-15V 16.2-21.5V 18.2-32.4V 20-24V 21.6-31V 21.6-31V 21-28V 24-28V 24-28V 25.3-44.2V 28-43V 28-39.5 32.5-53V 32.6-43V 40-48 43-49V 48-56 49.1-62V 42-56V 30A 2 36A 2 14A 1 18A 2 27A 2 6A 1 10A 1 15A 1.5 25A 2 36A 3.5 5A 1 18A 3 22.4 4 4.5A 1 10A 2 18 4 10A 2 18 4 10A 2 15A 3 Wide Range Programmable* 0.25-7.5V 30A 1 W2(6) W5 0.5-32V 8.5A 1 * Refer to Vega Datasheet Module V1 Min - V1 Max V1 Amp Dual Output H1L/1L 1.8V - 3.8V 12A H1L/1H 1.8V - 3.8V 12A H1L/2 1.8V - 3.8V 12A H1L/3 1.8V - 3.8V 12A H1L/4 1.8V - 3.8V 12A H1H/1L 3.9V - 5.5V 12A H1H/1H 3.9V - 5.5V 12A H1H/2 3.9V - 5.5V 12A H1H/3 3.9V - 5.5V 12A H1H/4 3.9V - 5.5V 12A H2/1L 5.6V - 9V 10A H2/1H 5.6V - 9V 10A H2/2 5.6V - 9V 10A H2/3 5.6V - 9V 10A H2/4 5.6V - 9V 10A H3/1L 9.1V - 16.2V 10A H3/1H 9.1V - 16.2V 10A H3/2 9.1V - 16.2V 10A H3/3 9.1V - 16.2V 10A H3/4 9.1V - 16.2V 10A H5/1L 16.2V - 28V 5A H5/1H 16.2V - 28V 5A H5/2 16.2V - 28V 5A H5/3 16.2V - 28V 5A H5/4 16.2V - 28V 5A V2 Min - V2 Max V2 Amp 1.8V - 3.8V 3.9V - 5.5V 5.6V - 9V 9.1V - 16.2V 16.3V - 25V 1.8V - 3.8V 3.9V - 5.5V 5.6V - 9V 9.1V - 16.2V 16.3V - 25V 1.8V - 3.8V 3.9V - 5.5V 5.6V - 9V 9.1V - 16.2V 16.3V - 25V 1.8V - 3.8V 3.9V - 5.5V 5.6V - 9V 9.1V - 16.2V 16.3V - 25V 1.8V - 3.8V 3.9V - 5.5V 5.6V - 9V 9.1V - 16.2V 16.3V - 25V 8A 8A 6A 6A 4.5A 8A 8A 6A 6A 4.5A 8A 8A 6A 6A 4.5A 8A 8A 6A 6A 4.5A 8A 8A 6A 6A 4.5A Slots 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3055 Del Sol Blvd * San Diego, CA 92154 * 1-800-LAMBDA-4 Revision B1: January 2005