1394b Dongles for Long-Distance Over Coaxial Cable Extend 1394b Links up to 60m with Power Over Cable Summary Microchip's EQCO-FW7501 and EQCO-FW5001 are two extender solutions for the FireWire(R) serial bus, operating over 75 and 50 coaxial cables respectively. Each unit contains a 1394b transceiver (EQCO875SC-HS or EQCO850SC-HS) that support full-duplex FireWire 800 (S800) data transfer rates (1.0 Gbit/s) over a single coax cable. The transceiver includes an adaptive equalizer that supports a cable length of up to 60m. In addition to this long-distance, full-duplex data transmission, these devices allow power to be transmitted simultaneously from the host side to a target--such as camera or hard drive--over the coax cable. The Microchip coaxial extenders fully support IEEE 1394b standards. Implementation Our 1394b Over Coax dongles make it easy to implement long-distance FireWire-based applications. By taking advantage of coaxial cable's secure shielding, our 1394b dongles can even be used in electrically noisy enviornments such as factories. The EQCO-FW7501 supports up to 60 meters of 75 coaxial cable; the EQCO-FW5001 supports up to 30m of 50 coaxial cable. In both cases, they operate at a datarate of up to 1.0 Gbit/s (S800). The dongles give users the flexibility to determine the best cable lengths for their applications. The transceiver contains an equalizer that is fully adaptive that adjusts to a variety of cable lengths as well as age and environmental conditions like temperature, without any need for programming. The dongles have a standard 1394b 9-pin connector on one end and a 75 BNC or 50 SMA connector on the opposite end. These dongles are ideal for laboratory and industrial applications, such as machine vision and factory automation, where robust cabling is required. They can also be used with high-flex, small-diameter coaxial cable with rotating joints, if necessary, for applications where multiple rotations are required. Technical Specifications IEEE 1394b Interface Connector Coax Interface/Cable EQCO-FW5001: 50 EQCO-FW7501: 75 Power Over Cable Max. Voltage Max. Current Max. Transmitted Power Power Supply to Remote Device Voltage Available Environmental Operating Temperature Relative Humidity Storage Temperature 9-Pin 1394b 50 rated SMA 75 rated BNC 32V (1394b Bus voltage) 1.0A (limited by coax dongle linear power supply) 32W (before cable losses) Vin (bus voltage) -1V-Coax DC drop (varies with cable type/length) 0C to +50C Up to 85% non-condensing -20C to +70C Performance Specifications Performance by Product and Cable Type (All cable information at S800/1.0 Gbit/s data-rate) RG174 RTK RG58 RG179 RG59 RG6 50/2.8 mm dia 50/2.8 mm dia 50/5 mm dia 75 75 75/5 mm EQCO-FW7501 (75) EQCO-FW5001 (50) - - - 20 meters/65 feet 40 meters/130 feet 60 meters/195 feet 15 meters/49 feet 25 meters/81 feet 30 meters/67.5 feet - - - www.microchip.com Visit our web site for additional product information and to locate your local sales office. Microchip Technology Inc. * 2355 W. Chandler Blvd. * Chandler, AZ 85224-6199 Information subject to change. The Microchip name and logo and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their respective companies. (c) 2014, Microchip Technology Incorporated. All Rights Reserved. Printed in the U.S.A. 2/14 DS00001674A Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Microchip: EQCO-FW7501 EQCO-FW5001