AZ6961 10 AMP SUBMINIATURE POWER RELAY FEATURES * * * * * * High sensitivity, 120 mW pickup Dielectric strength 5000 Vrms Isolation spacing greater than 8 mm 10 Amp switching capability Class B insulation standard, Class F version available Epoxy sealed version for automatic wave soldering and cleaning available * UL, CUR file E44211 * VDE 131637UG CONTACTS Arrangement Ratings SPDT (1 Form C) SPST (1 Form A) Resistive load: Max. switched power: 240 W or 2500 VA Max. switched current: 10 A Max. switched voltage: 240* VDC or 440 VAC UL, CUR Rating: 10 A at 250 VAC resistive [1] 8 A at 30 VDC/250 VAC [1] 8 A at 30 VDC/250 VAC, 100k cycles [2] B300 Pilot Duty [1] R300 Pilot Duty [1] 1/4 HP at 125 VAC [1] 1/2 HP at 250 VAC [1] VDE Rating: 8 A at 250 VAC *Note: if switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Material Resistance Silver cadmium oxide (AgCdO) [1] Silver tin oxide (AgSnO2) [2] Gold plating available < 100 milliohms initially COIL Power At Pickup Voltage (typical) 120 mW Max. Continuous Dissipation 1.2 W at 20C (68F) ambient Temperature Rise 20C (36F) at nominal coil voltage Temperature Max. 130C (266F) Class B Max. 155C (311F) Class F GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 10 million 3 X 105 at 8 A 240 VAC res. Operate Time (typical) 7 ms at nominal coil voltage Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation 1000 megohms min. at 20C, 500 VDC, Resistance 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40C (-40F) to 100C (212F) -40C (-40F) to 130C (266F) Class B -40C (-40F) to 155C (311F) Class F Vibration Break Contact: 5g at 10...500 Hz Make Contact: 20g at 10...500 Hz Shock 10 g Enclosure P.B.T. polyester, UL94 V-0 Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270C (518F) Max. Solder Time 5 seconds Max. Solvent Temp. 80C (176F) Max. Immersion Time 30 seconds Weight 8 grams NOTES 1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice. 4. Class F version not VDE approved 2/17/05W AZ6961 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC Max. Continuous VDC 5 6 11.6 14.0 12 27.2 24 53.1 48 107.3 60 122.4 Coil Resistance ORDER NUMBER* Must Operate VDC 1 Form A (SPST-NO) 1 Form C (SPDT) 3.5 4.2 AZ6961-1A-5D AZ6961-1A-6D AZ6961-1C-5D AZ6961-1C-6D 617 10% 8.4 AZ6961-1A-12D AZ6961-1C-12D 2350 10% 16.8 AZ6961-1A-24D AZ6961-1C-24D 9600 15% 33.6 AZ6961-1A-48D AZ6961-1C-48D 12500 15% 42.0 AZ6961-1A-60D AZ6961-1C-60D 113 10% 164 10% *Add "E" to "-1A" or "-1C" for AgSnO2 contacts. Add suffix "E" for sealed version. Add suffix "A" for gold plated contacts. Add suffix "F" for Class F version. MECHANICAL DATA FORM C VERSION PC BOARD LAYOUT 1.132 Max [28.75] 5xO.051 [O1.3] .408 Max [10.35] .298 [7.56] .494 Max [12.55] .012 [0.3] 2x.020 [0.5] .062 [1.57] .870 [22.1] .050 [1.3] FORM C .126 [3.2] .142 [3.6] 4xO.051 [O1.3] 3x.031 [0.8] .126 [3.2] .116 [2.95] .744 [18.9] .298 [7.56] .050 [1.3] FORM A 3x.016 [0.4] .198 [5.04] VIEWED TOWARD TERMINALS FORM A VERSION CIRCUIT DIAGRAM 1.132 Max [28.75] .408 Max [10.35] .494 Max [12.55] .012 [0.3] 2x.020 [0.5] 1 1 4 FORM C .142 [3.6] 2 4 FORM A 3 5 2 5 VIEWED TOWARD TERMINALS 2x.031 [0.8] 2x.016 [0.4] Dimensions in inches with metric equivalents in parentheses. Tolerance: .010" 2/17/05W