PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Fume Extraction Solutions We care for your working environment. PA01005862_gb.pdf WFE_09_GB_04.2009.indd 1 21.04.2009 13:23:17 Uhr PA01005862_17_GB.pdf PA01005862_17_GB.pdf PA01005862_17_GB.pdf Content Why Fume Extraction? 3 Zero-Smog(R) System 3 Tip Extraction and Volume Extraction 4 Filter Technology 5 Filter Process 5 Volume Extraction 6 - 17 WFE 8S ........................................................................................... 8 WFE 4S ........................................................................................... 9 WFE 2X ......................................................................................... 10 WFE 2S ......................................................................................... 11 WFE 2ES / WFE 2CS .................................................................... 12 Installation Options .................................................................... 13 Accessories ......................................................................... 14 - 17 Replacement Filters .................................................................... 17 Tip Extraction 18 - 26 WFE .............................................................................................. 20 WFE P ........................................................................................... 20 WFE 20D ...................................................................................... 21 FE (Fume Extraction) Soldering Irons ............................. 22 - 23 Safety Rests ........................................................................ 23 - 24 Accessories .................................................................................. 25 Spare Part Filter .......................................................................... 25 Installation Options ................................................................... 26 Pipe Systems for Tip and Volume Extraction 27 2 PA01005862_17_GB.pdf WFE_09_GB_04.2009.indd 2 22.04.2009 17:35:20 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Why Fume Extraction? Many work environments today, including soldering, adhesives, welding and laser applications, create particles and gases that can be harmful to the work place and the environment. Most people thought that the move to leadfree soldering would be more nature friendly. In reality lead-free soldering smoke emissions contain more breathable fine dust particles. More and smaller particles are produced due to the higher working temperatures required and because more flux is used in the soldering process. It is important to use the correct safety equipment to remove these hazardous substances. Fine particles are more dangerous to inhale than big particles as they get caught more easily and block the alveoli in the lungs. To protect the operator it is important to use an extraction system that is able to separate these particles and gases and then re-circulates the cleaned air back into the work place. This saves energy and reduces energy costs. In many countries legal regulations governing clean air in the work place require that hazardous substances are removed from the air in order to avoid harmful effects on people and machines. Zero-Smog(R) System The Zero-Smog(R) Systems from Weller(R) protect operator and the environment. Their filter systems catch the polluted air right at the source, and prevent the diffusion of particles and gases. The Zero-Smog(R) Systems have a broad range of filters that can be combined to provide the best solution to the problem. The standard filters are designed for the needs of lead-free soldering, adhesives and laser applications but Weller(R) has filters suitable for all the most common applications found in industry and laboratories. The Zero-Smog(R) Systems help to create a good work environment. They are small and easy to place and have low noise level emissions. Extraction arms and nozzles are adjustable so they can get close to the source and guarantee optimum fume capture. To increase filter lifetime and save energy, most Zero-Smog(R) Systems are fitted with an automatic speed control (dependent on the number of workplaces connected). Effective pre-filters, integrated into the units, save the main filter and can be exchanged very simply. 3 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 3 21.04.2009 13:23:26 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Zero-Smog(R) System Weller(R) Zero-Smog(R) Systems offer two solutions for fume extraction: Tip Extraction Tip Extraction Weller(R) FE (Fume Extraction) soldering irons have a smoke tube integrated into the handle. When soldering the tube is positioned directly above the joint and collects any fumes produced. Fume extraction attachments can be retro fitted to non fume extraction Weller(R) soldering irons. Less investment per work place Collect pollution direct at source Up to 20 collection points with one system (200 m apart) Ergonomic friendly with easy access to work piece No noise Minimal air movement Volume Extraction Volume Extraction More suitable for applications involving, for example, solder baths, hot air soldering, micro solders and gluing work. Weller(R) offers various mobile systems that purify the air at up to a maximum of 8 workplaces. Larger areas can be covered Low maintenance Mobile Quick & easy installation Economic for 1 to 8 work places Remote control 4 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 4 21.04.2009 13:23:45 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Filter Technology Weller(R) Zero-Smog(R) Systems are specifically designed for continuous operation in industrial environments. Care and attention at the design stage plus careful component choice and a high quality manufacturing process have given Weller(R) extraction systems a world wide reputation for reliability and longevity. Weller Zero-Smog Systems have a three stage filter system for removing small particles, fumes and gases that are produced in different working processes: (R) (R) 1. The hazardous substances are efficiently captured by the nozzle and are absorbed into the filter. 2. Bigger particles get caught in the prefilter and smaller particles get caught in the HEPA (High Efficiency Particulate Air) filter. 3. The Wide Band Gas Filter removes fumes and adhesives. Filter Class F5 Recommended Application for standard applications F7 for applications with high flux content H12 / H13 filter for clean rooms 1000 - 100 End product - clean air - is re-circulated into the workplace. particle size: medium filtration efficiency Em % against particle size 0,12 m: 0,5 m 100 90 80 70 60 50 40 30 20 10 5 m 10 m 100 m e.g. viruses e.g. bacteria, pigments e.g. fibres, pollen e.g. fog, hair Filter Class: F5 F7 H12 H13 Filter Class: F5 F7 H12 H13 Filter Class F5, F7: Fine dust filter as per EN 779 Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter Filter Process WFE, WFE P WFE 2X 1. 2.+3. 2. or 3. 1. WFE 20D, WFE 2S, WFE 4S, WFE 8S, WFE 2ES, WFE 2CS 2. or 3. 1. Fine dust filter For standard applications with a small amount of flux and pollution gases with high solid content, Weller(R) offers filter classes F5 or F7. 2. Compact filter consisting of: HEPA filter Filters particles up to 0,3 m. Weller offers HEPA (High Efficiency Particulate Air) filters of class H12 and H13, medium filtration efficiency 99,5 % / 99,95 %. Wide band gas filter For cleaning harmful fumes and vapours. The Weller wide band gas filter consists of 50 % active carbon and 50 % Puratex. Harmful gases with a high molecular weight are cleaned by the active carbon. Puratex is suitable for absorbing gases of lower molecular weight. Because of its composition, Puratex is able to convert a large number of chemical pollutants by means of molecular modification into non-polluting gases. 3. Gas filter (option) The gas filter is used for extracting adhesive fumes and solvents. Experience has shown that filtering suspended particles is not so vital in this respect. The gas filter is filled with 50 % active carbon and 50 % Puratex. The HEPA H12 and H13 is omitted. filter drawings not true to original PA01005862_gb.pdf WFE_09_GB_04.2009.indd 5 5 21.04.2009 13:23:48 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Volume Extraction Volume Extraction Volume extraction is the best choice where extraction over a wide area is required. It is an economical way to eliminate polluted process air as there is no need for fixed installations and maintenance requirements are minimal. Arms and nozzles do not require daily cleaning. Energy costs are saved because the cleaned air is re-circulated back into the work area and does not need to be heated or cooled like external air. Weller(R) has a broad range of filter units for volume extraction applications. Speed control allows optimal air flow regulation for each working place independent of the connected workplaces. Units can be remotely controlled via a remote control system (available as accessory) or by a PC (RS232) connection. 6 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 6 21.04.2009 13:23:58 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Volume Extraction Units Characteristics WFE 8S up to 8 workplaces, small solder ovens, selective and reflow soldering equipment For applications where extraction over a wide working area is required Mobile units suitable for stand alone and central applications All units equipped with maintenance free brushless turbine Connectable to external air outlet Low vacuum up to 2.800 Pa and high volume for efficient volume extraction WFE 4S up to 8 workplaces Maximum bridging distance 30 m (WFE 4S using Weller(R) pipe system 75) equally distributed to all connected exhausts Cost saving through automatic air flow control which provides each workplace with intelligent air flow regulation regardless of the connected workplaces Filter condition monitoring on the unit or by remote control (accessory) WFE 2S Wide range of extraction arms and nozzles available to achieve optimal work place configuration up to 4 workplaces Areas of application Hot air soldering WFE 2X up to 2 workplaces Soldering machines, robots, solder baths Laser processing Adhesive fumes Clean room applications (on request) Microscope workplaces Other fume emitting processes WFE 2ES / WFE 2CS up to 2 workplaces 7 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 7 21.04.2009 13:24:16 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Volume Extraction WFE 8S Powerful fume extraction unit with large integrated pre-filter Attributes Mobile fume extraction unit purifies air up to 8 workplaces Large built-in pre-filter The adjustable pressure control guarantees the optimal air flow regulation for each working place - independent of the connected workplaces Electronic filter control and easy filter exchange 4 wheels to allow easy movement of the unit Remote control with alarm function Noise damped metal housing Quick and simple installation ESD safe low sound level The fume extraction unit WFE 8S can be connected to up to 8 extraction arms. This makes the unit suitable to use as a small central system in applications such as soldering, adhesives, clean-room work and laser work. It is also capable for connection to small, selective reflow and soldering ovens. The large integrated pre-filter makes the WFE 8S very suitable for lead-free soldering as it is able to catch a large quantity of particles. The WFE 8S is a mobile system that is simple to install - it does not require any permanent installation. Its high quality components keep service needs to a minimum. The combination of low running costs and a flexible system independent of fixed installations produces a unit with a very low cost of ownership. WFE 8S can be connected so that it exhausts air. This is an advantage in applications where re-circulation is not allowed. To further increase the filter lifetime and save energy, the WFE 8S has an automatic airflow control - depending on the number of connected workplaces. Fine dust pre-filter F7 Scope of supply WFE 8S Technical Data Maximum capacity 8 workplaces, small and medium sized reflow, wafer, selective equipment Maximum extraction rate 615 m/h Sound level < 55 db (A) at 1 m distance WFE 8S Fume extraction unit 230/120 V / 50/60 Hz with build-in pre-filter Compact filter Consists of: HEPA filter H13, wide band gas filter (50 % active carbon, 50 % Puratex) Operating voltage 230/120 V / 50/60 Hz Power input 450 VA Order No. 230V 005 36 586 99 Maximum vacuum 2.800 Pa Order No. 120V WFE8S Dimensions (L x W x H) 402 x 796 x 1016 mm HEPA filter H13 and wide band gas filter 15.9 x 31.3 x 40 in Weight 68 kg / 150 lb 8 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 8 21.04.2009 13:24:21 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf WFE 4S Mobile fume extraction unit purifies air up to 8 soldering workplaces Pre-filter to extend capacity of WFE 2S, WFE 4S, WFE 2X Attributes Mobile fume extraction unit purifies air up to 8 workplaces The adjustable pressure control guarantees optimal air flow regulation for each working place independent of the connected workplaces Electronic filter control and easy filter exchange 4 wheels to allow easy movement of the unit Remote control with alarm function Noise damped metal housing Quick and simple installation The pre-filter is recommended for use with solder bath, automatic soldering, laser or other major dust emitting applications. It acts as a first stage in the filter process increasing the lifetime of the main filter units. The prefilter can be fixed directly to the top of the WFE 4S or in conjunction with the WFE 2S and WFE 2X as an external part of the fume extraction system. Scope of supply Filter box 2 x hose connections 75 Filters must be ordered separately (see page 17) ESD safe The fume extraction system WFE 4S is userfriendly with quick and simple installation and filter exchange. It has a low noise emission level and is small and convenient to locate within the work area. The high quality components used in the WFE 4S result in low servicing requirements and long system life. To increase filter lifetime and save on energy, the WFE 4S is fitted with an automatic airflow speed control - depending on the number of connected workplaces. To extend the capacity an external pre-filter can be fixed directly to the WFE 4S. Maximum capacity 8 workplaces Maximum extraction rate 615 m/h Sound level 51 db (A) at 1 m distance Standard connection pipe system 75 Operating voltage 230/120 V / 50/60 Hz Power input 450 VA Maximum vacuum 2.800 Pa Weight The powerful maintenance free variable speed turbine is electronically controlled and has a maximum capacity of 615 m3/h. It has 3 operating modes: 1. Standard speed control - selected by the user irrespective of the load on the system. 2. Speed limiting control - the pump speed is automatically varied to match the load on the system. 3. Economy control - the rate of fume absorption is maintained at a constant value. The operating hours and the filter condition are recorded for maintenance purposes. 005 87 358 62 Fine dust pre-filter F7 HEPA filter H13 and wide band gas filter Scope of supply Technical Data Dimensions (L x W x H) Order No. low sound level WFE 4S Fume extraction unit 230/120 V / 50/60 Hz Compact filter Consists of: HEPA filter H13, wide band gas filter (50 % active carbon, 50 % Puratex) Fine dust pre-filter F7 Option: WFE 4S with gas filter Compact filter for adhesive fumes, consists of: Wide band gas filter (50 % active carbon, 50 % Puratex) Fine dust filter F7 450 x 450 x 650 mm Order No. 230V 005 36 256 99 Order No. 230V 005 36 496 99 17.7 x 17.7 x 25.6 in Order No. 120V WFE4S Order No. 120V WFE4SG 21 kg / 46.3 lb 9 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 9 21.04.2009 13:24:25 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Volume Extraction WFE 2X Mobile fume extraction unit purifies air up to two workplaces Attributes Mobile fume extraction unit purifies air at up to 2 workplaces Electronic filter control and easy filter exchange Wireless remote control with alarm function Extra noise damped metal housing Quick and simple installation Trolley available as accessory Minimized foot print Switching power supply fits for all global voltages Optimized lifetime filter ESD safe low sound level The WFE 2X is a fume extraction unit and is suitable for applications with a high demand for gas and particle filtration, e.g. soldering, adhesives, clean room work and laser. WFE 2X Kit 1S It can be placed on a trolley and be moved easily between different work places. Variable speed and the alarm function for filter exchange can be set via the remote control. For applications which produce a large quantity of particles, e.g. lead-free soldering, an external pre-filter can be fitted to increase the lifetime of the main filter. To make installation easier, the WFE 2X can be suspended under the work table with special fittings. An RS 232 interface makes it possible to integrate the software with other process equipment. Mobile fume extraction kit Scope of supply Scope of supply Technical Data Maximum capacity 2 work places Maximum extraction rate 140 m3/h Sound level < 52 db (A) at 1 m distance Operating voltage 100 - 240 V / 50/60 Hz Power input 100 W Maximum vacuum 2.300 Pa Dimensions (L x W x H) 210 x 460 x 660 mm Weight HEPA filter H13 and wide band gas filter WFE 2X Fume extraction unit 100-240 V / 50/60 Hz Compact filter consists of: HEPA filter H13, wide band gas filter (50 % active carbon / 50 % Puratex) Accessories for WFE 2X see on page 16. 005 36 588 99 WFE 2X Fume extraction unit 100-240 V / 50/60 Hz 005 36 579 99 KIT 1 WF 60 Sloped stativ extraction arm for volume extraction consists of: 005 36 598 99 Stativ extraction arm 005 36 573 99 Sloped nozzle 005 365 75 99 Bench mounting clamps, 2 x 005 36 576 99 Extraction hose, 3 m 005 36 578 99 Extraction arm 8.3 x 18.1 x 26 in Order No. 230V plug 005 36 588 99 Order No. 230V 005 36 587 99 15 kg / 33 lb Order No. 120V plug WFE2X Order No. 120V WFE2XKIT1S 10 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 10 21.04.2009 13:24:36 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf WFE 2S WFE 2 Kit 1 Mobile fume extraction unit available in two kits Attributes Mobile fume extraction unit purifies air at up to 4 workplaces Electronic filter control and easy filter exchange 4 wheels to allow easy movement of the unit Remote control with alarm function Noise damped metal housing Quick and simple installation Two kits available Portable fume extraction kit for one work station Scope of supply 005 36 266 99 WFE 2S Fume extraction unit 120/230 V / 50/60 Hz 005 36 572 99 KIT 1 WF Sloped 60 for volume extraction consists of: 005 36 578 99 Extraction arm 005 36 577 99 Sloped nozzle 005 36 574 99 Stop valve 005 36 575 99 Bench mounting clamps, 2 x 005 36 576 99 Extraction hose, 3 m ESD safe low sound level Fine dust pre-filter F7 The fume extraction unit WFE 2S is easy to install and operate. It is designed as a smaller, central system and is supplied complete with flexible hose, arm and bracket, ready for installation at the workplace. A powerful, maintenance-free pump provides continuous fume extraction at a maximum air extraction rate of 230 m3/h. A built-in microprocessor controls the adjustable pump speed avoiding unnecessary waste of suction power and saving energy. To optimize the degree of pollutant separation, the WFE 2S can be modified with filters for different applications. Portable fume extraction kit for two work stations Scope of supply Maximum extraction rate 230 m3/h Sound level 48 db (A) in 1 m distance Order No. 230V 005 36 266 99 Standard connection pipe system 50 Order No. 120V WFE2S Operating voltage 120/230 V / 50/60 Hz 4 work places Power input 275 VA Maximum vacuum 2.700 Pa Dimensions (L x W x H) 320 x 320 x 395 mm Weight WFE2SKIT1 HEPA filter H13 and wide band gas filter WFE 2S Fume extraction unit 120/230 V / 50/60 Hz Compact filter consists of: HEPA filter H13, wide band gas filter (50 % active carbon / 50 % Puratex) Fine dust pre-filter F7 Maximum capacity 005 36 436 89 Order No. 120V WFE 2 Kit 2 Scope of supply WFE 2S Technical Data Order No. 230V Option: WFE 2S with gas filter Compact filter for adhesive fumes. Consists of: Wide band gas filter (50 % active carbon / 50 % Puratex) 12.6 x 12.6 x 15.5 in Order No. 230V 005 36 466 99 19 kg / 41.8 lb Order No. 120V WFE2SG 005 36 266 99 WFE 2S Fume extraction unit 120/230 V / 50/60 Hz 2 x 005 36 572 99 KIT 1 WF Sloped 60 for volume extraction consists of: 2 x 005 36 578 99 Extraction arm 2 x 005 36 577 99 Sloped nozzle 2 x 005 36 574 99 Stop valve 2 x 005 36 575 99 Bench mounting clamps, 2 x 2 x 005 36 576 99 Extraction hose, 3 m Order No. 230V 005 36 456 89 Order No. 120V WFE2SKIT2 11 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 11 21.04.2009 13:24:54 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Volume Extraction WFE 2ES / WFE 2CS Fume extraction unit as economical solution Attributes Mobile fume extraction unit purifies air up to 2 workplaces Easy filter exchange Quick and simple installation Optional: Speed control (WFE 2CS) ESD safe Portable fume extraction kit for one work station The fume extraction unit WFE 2ES is easy to install and operate. It is designed as a smaller central system and is supplied complete with flexible hose, arm and bracket, ready for installation at the workplace. low sound level Scope of supply 005 36 506 99 WFE 2ES Fume extraction unit consists of: HEPA filter H12, active carbonate foam Fine dust pre-filter F5 005 36 571 99 KIT 1 WF Funnel 60 consists of: 005 36 578 99 Extraction arm 005 36 573 99 Funnel nozzle 005 36 574 99 Stop valve 005 36 575 99 Bench mounting clamps, 2 x 005 36 576 99 Extraction hose, 3 m Order No. 230V 005 36 516 89 Order No. 120V WFE2ES KIT1 Fine dust pre-filter F5 HEPA filter H12 and active carbonate foam Option: Arm with sloped nozzle Technical Data Maximum capacity 2 work places Maximum extraction rate 220 m3/h Sound level 55 db (A) at 1 m distance Operating voltage 230V / 50Hz (115V / 60Hz) Power input 115 VA Maximum vacuum 1.800 Pa Dimensions (L x W x H) 320 x 320 x 395 mm Weight 005 36 572 99 consists of: 005 36 578 99 005 36 577 99 005 36 574 99 005 36 575 99 005 36 576 99 KIT 1 WF Sloped 60 for volume extraction Extraction arm Sloped nozzle Stop valve Bench mounting clamps, 2 x Extraction hose, 3 m Option: WFE 2CS with speed control 12.6 x 12.6 x 15.5 in Order No. 230V 005 36 526 99 9 kg / 19.8 lb Order No. 120V WFE2CS 12 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 12 21.04.2009 13:25:09 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Installation Options Installation option for a central system with WFE 2S Total pipe length 15 m (590.55 in) KIT 1 WF Funnel 60 for volume extraction 005 36 571 99 Kit1 WF Sloped 60 005 36 572 99 extraction hose 60 3m 005 36 576 99 Stop valve WFV 60 005 36 574 99 WFE Adapter with Silicone O-ring 005 87 627 53 extraction arm 60 005 36 578 99 pipe 50 mm T piece 50 mm WFE Adapter with Silicone O-ring 005 87 627 53 WD 1000T Stop valve WFV 60 005 36 574 99 nozzle sloped 005 36 577 99 WFE Adapter with Silicone O-ring 005 87 627 53 WF nozzle funnel 005 36 573 99 WR3M extraction hose 60 3m 005 36 576 99 hose connection 50 90 005 87 358 48 extraction arm 60 005 36 578 99 hose connection 50 005 87 358 47 bench mounting clamps 60 005 36 575 99 bench mounting clamps 60 005 36 575 99 extraction hose 60 sold by meter 005 36 576 99 RS 232 cable (2 m) 005 31 191 99 WFE Adapter 50-60 005 87 627 53 remote control 005 87 359 09 WSD 81 stop valve 005 36 574 99 metal exhaust hood 005 87 358 45 WFE Adapter 50-60 005 87 627 53 pipe 50 mm extraction hose 50 mm hose connection 75 90 005 87 358 33 Installation option for a central and stand alone system with WFE 4S Kit WF Funnel 60 (Funnel nozzle) 005 36 571 99 WF Absaugarm 60 005 36 578 99 stop valve WFV 60 005 36 574 99 WF Funnel nozzle 005 36 573 99 Total pipe length 30 m (1181.10 in) extraction hose 60 3 meter 005 87 57 699 WFE adapter with Silicone O-ring 005 87 627 53 hose connection 50 005 87 358 47 adapter hose 005 87 627 55 pre-filter box 005 87 358 62 WSB 150 pipe 75 005 87 358 70 pipe 75 T-piece 75 005 87 359 32 005 87 358 71 extraction hose 75 005 87 353 13 WFE 4S adapter 75/50 005 87 358 56 hose clamp 70-90 005 87 358 31 extraction hose 60 3 meter 005 36 576 99 RS 232 cable (2 m) 005 31 191 99 right angle pipe 75 005 87 358 69 WFE adapter 50-60 005 87 627 53 bench mounting clamps 60 005 36 575 99 Pipe clamps 75 005 87 358 64 Adapter 75/50 005 87 358 56 T-piece 75 005 87 358 71 WFE adapter 50-60 005 87 627 53 160 extraction hose 60 3 Meter 005 36 57 699 remote control 005 87 359 09 extraction arm with stativ 005 36 989 99 extraction hose 60 1 meter 005 87 35 427 Bench mounting clamps 60 005 36 575 99 RS 232 cable (2 m) 005 31 191 99 bench mounting clamps 60 005 36 575 99 WF sloped nozzle 005 36 577 99 Stop valve WFV 60 005 36 574 99 WD 2000M extraction hose 60 5 meter 005 87 62 756 extraction arm 60 005 36 578 99 End seal 75 005 87 358 55 WFE 8S extraction hose 60 3 meter 005 36 57 699 Kit WF Sloped 60 (for volume extraction) 005 36 572 99 remote control 005 87 359 09 stop valve 005 36 574 99 WFE Adapter 50-60 005 87 627 53 pipe 50 mm extraction hose 50 mm, from existing system 13 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 13 21.04.2009 13:25:11 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Volume Extraction Accessories When soldering, gluing or working with solvents it is important to place the nozzle as close to the source as possible to prevent harmful particles and gases being spread into work area. The Weller(R) 60 mm (2.36 in) flexible extraction arms allow the quiet and efficient capture of polluted air. The arms and nozzles are simple to install due to the click-on funnels and can easily be fixed into the required position. Order No. 005 87 358 47 Description Hose connection 50 for WFE 2S and WFE 4S, e.g. for the direct connection of accessories by means of 50 mm (1.96 in) extraction hose. Plastic, black. 005 87 358 32 Hose connection 75 for WFE 2S and WFE 4S, e.g. for connection to a stand alone system by means 75 mm (2.95 in) pipe or 75 mm (2.95 in) extraction hose. Plastic, black. 005 87 358 48 Hose connection 50, 90 for WFE 2S and WFE 4S, e.g. for the direct connection of accessories by means of 50 mm (1.96 in) extraction hose. Plastic, black. 005 87 358 33 Hose connection 75, 90 for WFE 2S and WFE 4S, e.g. for connection to a stand alone system by means of 75 mm (2.95 in) pipe or 75 mm (2.95 in) extraction hose. Plastic, black. 005 87 353 13 Extraction hose 75, o 75 mm (2.95 in), for connection to pipe system 75. Sold by metre. Plastic, grey/black, flexible. 005 87 354 27 Extraction hose 60, 1 m (39,37 in), o 60 mm (2.36 in), for connection to pipe system 50. Sold by metre. Plastic, grey/black, flexible. 005 36 576 99 Extraction hose 60, 3 m (118,11 in), o 60 mm (2.36 in), for connection to pipe system 50. Plastic, grey/black, flexible. 005 87 627 56 Extraction hose 60, 5 m (196,85 in), o 60 mm (2.36 in), for connection to pipe system 50. Plastic, grey/black, flexible. 005 87 627 55 Hose adapter to extend 60 mm hoses 005 87 358 79 Hose clamp 50 - 70 mm, (1.96 - 2.75 in), 2 units, for securing extraction hose 50. 005 87 358 31 Hose clamp 70 - 90 mm, (2.75 - 3.54 in), 2 units, for securing extraction hose 75. 14 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 14 21.04.2009 13:25:17 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Order No. 005 36 598 99 Description Articulated extraction arm, 60 mm diameter, flexible extraction arm with articulated joint and and bench clamp. ESD safe. 005 36 578 99 Flexible extraction arm, 60 mm (2.36 in) diameter, for sloped and funnel nozzles. Maximum length 1 m (39.37 in), ESD safe. 005 36 577 99 200 mm 200 mm WF 60 sloped nozzle for flexible and stativ extraction arm. 300 mm 300 mm 100 mm 150 mm 200 mm 100 mm 150 mm 0 mm 100 mm 150 mm 0 mm 300 mm 300 mm 200 mm 200 mm 300 mm 100 mm 200 mm 100 mm 100 mm 200 mm 0 mm 100 mm 300 mm 0 mm 300 mm 200 mm 0 mm 100 mm 100 mm 200 mm 300 mm 300 mm 200 mm 100 mm 0 mm 100 mm 200 mm 300 mm 005 36 573 99 300 mm WF funnel nozzle 60, for flexible and stativ extraction arm, 230 mm x 100 mm. 100 mm 200 mm 300 mm 300 mm 200 mm 100 mm 100 mm 200 mm 300 mm 005 87 358 45 Exhaust hood, 200 x 100 mm (7.87 x 3.93 in), recommended for use with hot air soldering operations uses extraction hose 60. 15 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 15 21.04.2009 13:25:27 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Volume Extraction Accessories Accessories for WFE 2X Order No. 005 36 574 99 Description WFV 60 Stop valve. Table connector for 60 mm (2.36 in) flex arm and extraction tube including air flow valve. 005 36 575 99 Bench mounting clamps, 2 x. Maximum width of clamp 100 mm (3.93 in). 100 mm (3.93 in) diameter. Metal. 005 87 627 53 50/60 Adapter with Silicone O-ring, to connect 60 mm hoses to WFE 2ES, WFE 2CS and WFE 2S. 005 87 627 50 40/60 Adapter for applications using the 60 mm (2.36 in) extraction system connected to the former WFTB 50 and WFFMP 50. Order No. 005 36 591 99 Description Hanging device for table mounting for fume extraction unit WFE 2X. 005 36 592 99 Trolley for fume extraction unit WFE 2X. 16 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 16 21.04.2009 13:25:36 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Exhaust accessories to blow waste air out of a building Remote control for tip and volume extraction units Order No. 005 87 359 20 Description Exhaust adapter of pipe 100 to fume extraction unit WFE 20D. 005 87 358 40 Exhaust adapter of pipe 100 to fume extraction unit WFE 4S. 005 87 359 15 Exhaust adapter of pipe 75 for fume extraction unit WFE 2S. Order No. 005 87 359 09 Description Remote control for fume extraction units WFE 20D, WFE 2S, WFE 4S and WFE 8S. Switching unit on/off, speed setting (only WFE 2S / WFE 4S), filter status display. 005 31 191 99 Interface cable RS 232, 2 m (78.74 in) for remote monitoring by PC (type 1:1). 005 36 593 99 Remote control for fume extraction unit WFE 2X with 2 m (78.74 in) cable. Order No. 005 36 590 99 Spare filter for WFE 2X: Replacement compact filter Consists of: HEPA filter H13, wide band gas filter (50 % active carbon, 50 % Puratex) Replacement Filters Order No. 005 36 594 99 005 36 595 99 Spare filter for WFE 8S: Replacement pre-filter Replacement compact filter (4 pieces in one pack) Consists of: HEPA filter H13, wide band gas filter (50 % active carbon, 50 % Puratex) Order No. 005 87 358 37 005 87 358 36 005 87 358 38 005 87 358 35 Order No. 005 87 358 84 005 87 358 85 005 87 358 83 005 87 358 95 Spare filter for WFE 2S: Fine dust filter F5 (10 pieces) Fine dust filter F7 (10 pieces) Compact filter Consists of: HEPA filter H13, wide band gas filter (50 % active carbon, 50 % Puratex) Option: Adhesive fume filter (50 % active carbon, 50 % Puratex) Order No. 005 87 627 01 Spare filter for WFE 2ES: Fine dust filter F5 (10 pieces) Compact filter Consists of: HEPA filter H12, wide band gas filter (10 % active carbonate foam) Order No. 005 87 358 60 005 87 359 24 Spare filter for WFE 4S: Fine dust filter F5 (10 pieces) Fine dust filter F7 (10 pieces) Compact filter Consists of: HEPA filter H13, wide band gas filter (50 % active carbon, 50 % Puratex) Option: Adhesive fume filter (50 % active carbon, 50 % Puratex) Spare filter for pre-filterbox: Pocket filter F7 for large quantities of dust Filter bag for sticky residuce (e.g. large quantities of liquid flux) 17 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 17 21.04.2009 13:25:41 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Tip Extraction Tip Extraction Weller(R) FE (Fume Extraction) soldering irons have a smoke tube adapted to the handle. When soldering the tube is positioned directly above the joint and collects any fumes produced. Fume extraction irons can be connected to the Weller(R) Zero-Smog(R) Systems WFE, WFE P (both bench mounted units driving up to 2 irons) or WFE 20D - a mobile unit driving up to 40 irons. A safety rest with Stop + Go function switches the extraction system on when the FE soldering iron is removed from the safety rest and off after a short delay when the iron is replaced (WFE & WFE P only). Fume extraction attachments can be retro-fitted to non fume extraction Weller(R) soldering irons. 18 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 18 21.04.2009 13:25:49 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Tip Extraction Units Characteristics FE (Fume Extraction) soldering irons extract fumes directly at the soldering tip. Less airflow and high vacuum, up to 12.000 Pa for efficient fume extraction. Maximum bridging distance 200 m (7874 in), WFE 20D requires Weller(R) pipe system 50. Filter condition warning - LED on the unit or remote control via RS 232 and PC (WFE 20D). Variable electronically controlled pump speed, adjustable at the unit or by remote control via RS 232 and PC (WFE 20D). WFE 20D up to 40 workplaces Areas of application Hand soldering Small solder baths WFE P up to 2 workplaces WFE up to 2 workplaces 19 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 19 21.04.2009 13:25:56 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Tip Extraction WFE Attributes Small, portable, compressed air driven fume extraction unit ESD safe The fume extraction unit WFE requires clean and oil-free compressed air. The vacuum is generated by a maintenance-free compressed air converter. The contaminated air is purified by a pre-filter and main filter system. A compressed air cleaning filter removes additional odours caused by the compressed air. This highly efficient filter system makes the WFE a genuine air recovery system. The filter-lift system allows fast and convenient filter cartridge replacement. The FE (Fume Extraction) soldering irons are connected directly to the unit - additional leads are not required. Up to 2 FE soldering irons can be connected Maintenance-free compressed air converter Portable unit for stand alone applications HEPA filter H13 and wide band gas filter low sound level Scope of supply Technical Data Maximum capacity 2 FE soldering irons Sound level < 39 db (A) at 1 m distance Maximum vacuum 20.000 Pa Operating pressure 3,5 - 6 bar Air consumption 30 l/min Height 200 mm (7.8 in) Diameter 140 mm (5.5 in) Weight 2,7 kg / 5.9 lb WFE Fume extraction unit Compressed air cleaning filter Compact filter Consists of: HEPA filter H13, wide band gas filter (50 % active carbon, 50 % Puratex) Fine dust filter F7 Order No. Fine dust pre-filter F7 005 36 402 99 WFE P Attributes Small, portable, electrically driven fume extraction unit ESD safe low sound level The Weller(R) WFE P is a line voltage fume extraction unit designed to run with one or two FE (Fume Extraction) soldering irons. The WFE P has an electric, long-life, soundproofed vacuum pump to produce the required vacuum - it does not need a compressed air supply. The vacuum pump has two power settings which can be selected by means of rocker switches depending on the number of FE soldering irons connected to the unit. This saves energy. The motor is maintenance-free and has a thermal over load to protect the unit. The filter lift system allows fast and convenient main filter replacement. FE soldering irons are connected directly to unit - additional leads are not required. Up to 2 FE soldering irons can be connected Electric vacuum pump to produce the required vacuum 2 power stages for higher extraction perfomance with 2 FE soldering irons Portable unit for stand alone applications HEPA filter H13 and wide band gas filter Technical Data Scope of supply Maximum capacity 2 FE soldering irons Sound level < 45 db (A) at 1 m distance Operating voltage 230 V / 50 Hz Power input 70 W Maximum vacuum 30.000 Pa Height 295 mm (11.6 in) WFE P Fume extraction unit Compact filter Consists of: HEPA filter H13, wide band gas filter (50 % active carbon, 50 % Puratex) Fine dust filter F7 Diameter 140 mm (5.5 in) Order No. 230V 005 36 386 99 Weight 4 kg / 8.8 lb Order No. 120V 005 36 232 99 Fine dust pre-filter F7 20 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 20 21.04.2009 13:25:59 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf WFE 20D Mobile, powerful, electronically driven fume extraction unit Characteristics Two operating modes: Mode 0: Vacuum regulated to 12.000 Pa Mode 1: Extraction performance can be set between 20 % - 100 % with the control buttons. Electronic filter check (LED) through differential pressure measurement. If the specified degree of contamination is exceeded, the unit switches off. Electronic filter operation status display. For better management of filter change intervals - the filter operating hours can be pre-specified. The need for filter change is indicated in good time allowing adequate time for filter procurement and replacement. Interface RS 232 for remote monitoring or remote control. Remote control available as accessory. ESD safe low sound level Up to 5 Weller(R) FE (Fume Extraction) soldering irons can be connected directly to the fume extraction unit WFE 20D. Using the Pipe System 50 (available as accessory) up to 40 FE soldering irons can be supported by the unit. The powerful maintenance-free turbine generates a vacuum of 12.000 Pa and is electronically controlled. Operating hours and filter contamination level are also recorded electronically. The filter system achieves a filtration rate of 99,95 % as per EN 1822 with a particle size of 0,12 m. Attributes Up to 40 FE soldering irons can be connected Electric driven, maintenance free turbine produces the required vacuum 4 wheels to allow easy movement of the unit Mobile unit for central and stand alone applications Central installation for pipe systems up to 200 m (7874 in) Fine dust pre-filter F7 Technical Data Maximum capacity 40 FE soldering irons Sound level < 51 db (A) at 1 m distance Operating voltage 230 V / 50 Hz 120 V / 60 Hz Power input 630 VA Maximum vacuum 12.000 Pa Max. delivery rate 100 m3/h Dimension (L x W x H) 450 x 450 x 695 mm Weight Scope of supply WFE 20D Fume extraction unit Compact filter Consists of: HEPA filter H13, wide band gas filter (50 % active carbon, 50 % Puratex) Fine dust filter F7 17.7 x 17.7 x 27.3 in Order No. 230V 005 36 476 99 45 kg / 99 lb Order No. 120V WFE20D HEPA filter H13 and wide band gas filter 21 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 21 21.04.2009 13:26:02 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Tip Extraction FE (Fume Extraction) Soldering Irons The smoke absorption tube is integrated into the handle. It can be placed over the joint when soldering but can be retracted when access to the joint is a problem and can also be removed for cleaning. The irons are temperature controlled, ergonomic and allow precise handling. These electronically controlled irons can be driven from any Weller(R) power unit compatible with the rating of the iron or any Weller(R) rework station. The range of iron power ratings and the extensive range of solder tips mean that there is an iron to suit all applications. The FE soldering irons are supplied with a burn proof hose 5 mm (0.19 in) diameter, 2,5 m (98.42 in) long. ESD safe Order No. 005 33 150 99 Description FE 50 Soldering iron set 50 W / 24 V, with safety rest KH 20*. Not available in US. 005 32 152 99 FE 50M Soldering iron set 50 W / 24 V, Magnastat controlled with safety rest KH 20*. Not available in US. 005 33 151 99 FE 75 Soldering iron set 80 W / 24 V with safety rest KH 20*. For use with LT tips. 005 26 162 99 FE 80 Soldering iron 80 W / 24 V with safety rest KH 20*. Not available in US. * Cleaning brush for FE tubes and fume extraction funnels are included in the scope of supply of the soldering irons for use with KH 20 and KH 23 safety rests. FE Attachments Gedruckt durch: Martinu am: 4.6.2007 A range of FE attachments are available to fit standard Weller(R) soldering and desoldering irons to convert them to fume extraction versions. The attachments are supplied with all necessary fittings and hoses. The performance of the retro-fitted tools is not affected. Order No. 005 29 186 99 005 29 185 99 005 87 448 75 005 87 448 76 005 15 156 99 005 25 125 99 005 28 126 99 005 13 125 99 For Weller(R) soldering irons WP 120, WP 80, WSP 80, WMP, MLR 21 or soldering irons with handle diameter 10 -13 mm (0.39 - 0.51 in). Clip will be fixed with an silicone O-ring to the soldering iron. Description FE Attachment with tube, o 6 mm (0.23 in) for WP 120, WSP 80, WP 80, MLR 21, MLR 80, WMP. FE Attachment with tube, o 4,5 mm (0.17 in) for WP 120, WMRP and WSP 80, WP 80, MLR 21, MLR 80, WMP for fine soldering applications. FE Spare Clip-Set for FE attachment, tube o 4,5 mm (0.17 in). FE Spare Clip-Set for FE attachment, tube o 6,0 mm (0.23 in). WDH 50 safety rest for soldering iron with FE attachment. FE Attachment for LR 21, LR 82, TCPS, W 61, W 101, WSP 150 with safety rest AK 1. FE Attachment for WSF 80D5/8. FE Attachment for DS 22, DS 80 and DSX 80 desoldering iron. 22 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 22 21.04.2009 13:26:09 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Accessories for FE Irons Order No. 005 36 352 99 Description Locking clip. The locking clip is used to disconnect FE (Fume Extraction) soldering irons that are not required so that there is no unnecessary loss of extraction power. The clip can be operated quickly and easily. 005 25 410 00 Extraction hose (spare part) Heat-resistant silicone hose, o 5 mm (0.19 in), for all FE (Fume Extraction) soldering irons (sold by metre). Order No. 005 15 065 99 Description Cord support. The cord support keeps the soldering iron cord out of the direct working area. This allows easier handling of the soldering iron. Cord support for safety rest AK 20. 005 15 066 99 Cord support for safety rest KH 20/23. Order No. 005 15 030 99 Description AK 20 Safety rest for FE 50, FE 50M, FE 75, FE 80; for LR 21, LR 82 and TCP with attachment. 005 15 020 99 KH 20 Safety rest for FE 50, FE 50M, FE 75, FE 80. 005 15 023 99 KH 23 Safety rest for FE 25. 005 15 140 99 WPH 80 Safety rest for WSP 80FE; for MLR 21 with FE attachment. Safety Rests for FE Soldering Irons 23 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 23 21.04.2009 13:26:22 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Tip Extraction Safety Rests with Stop + Go Function for FE soldering irons together with fume extraction units WFE and WFE P The Weller(R) Stop + Go safety rests are recommended accessories for FE soldering irons using the WFE or WFE P extraction units. A fibre optic sensor switches the extraction unit on when the FE soldering iron is removed from the 24 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 24 safety rest and off when the FE soldering iron is replaced in the safety rest. After a short delay to gather the fumes from any solder on the tip, it switches the unit off. This saves the soldering tip and reduces the running costs. Order No. 005 15 086 99 Description KHP Pneumatic basic unit (for WFE), safety rest with Stop + Go function with fibre optic sensor for soldering irons FE 25, FE 50, FE 50M, FE 75 and FE 80. 005 15 076 99 KHE Electric basic unit (for WFE P), safety rest with Stop + Go function with fibre optic sensor for soldering irons FE 25, FE 50, FE 50M, FE 75 and FE 80. 005 15 080 99 KHE/P Second safety rest with fibre optic sensor for extending to 2 workplaces for soldering irons FE 25, FE 50, FE 50M, FE 75 and FE 80. 005 15 084 99 KHP 80 Basic unit pneumatic (for WFE) safety rest with Stop + Go function with fibre optic sensor for soldering iron WSP 80FE. 005 15 083 99 KHE 80 Basic unit electric (for WFE P) safety rest with Stop + Go function with fibre optic sensor for WSP 80FE. 005 15 141 99 KHE 80/P 80 Second safety rest with fibre optic sensor for extending to 2 workplaces for WSP 80 FE. 005 15 156 70 WDH 50 E/P Safety rest for soldering iron with FE Attachment Not available in US. 21.04.2009 13:26:25 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Accessories for workbench installations Order No. 005 36 316 99 Description Extraction hose 40, 1 m (39.37 in), o 40 mm (1.5 in). Complete with 2 connecting elements for direct connection of unit (WFE 20D) to pipe system 50. Plastic, grey/black, flexible. 005 36 414 00 Extraction hose 40, o 40 mm (1.5 in) without connecting elements. Sold by metre. Plastic, grey / black, flexible. 005 36 415 99 Connecting element 40 - 50 for connecting extraction hose 40 and pipe system 50. Rubber, black. 005 36 326 99 Extension hose DN 17 (13 x 3 mm), 5 m (198.85 in), o 17 mm (0.6 in), used where the fume extraction iron is further than 2,5 m (98.42 in) from the pipe system 50. Note: Connection nipple for hose 17 and adapter 17 will be required. Plastic, transparent. 005 87 358 65 Connection nipple for extension hose 17. Amend direction to read direct. 005 87 358 66 Nut G 3/8" for connection nipple. 005 36 343 99 Adapter 17 for connection extension hose DN 17 with o 5 mm (0.19 in) extension hose of FE irons. 005 36 338 99 Connection nipple for 5 mm (0.19 in) diameter extraction hose to connect FE soldering irons directly to pipe system 50. The connection nipple is screwed at any point into the pipe system. 005 87 350 50 End cap to close off to connection nipple. Order No. 005 87 358 37 005 87 358 36 005 87 358 38 Spare filter WFE 20D: Fine dust filter F5 Fine dust filter F7 Compact filter Constists of: HEPA filter H13, wide band gas filter (50 % active carbon, 50 % Puratex) Spare Part Filters Order No. 005 87 357 57 005 36 410 99 005 36 407 99 005 36 421 99 005 36 597 99 Spare filter for WFE: Compressed air - cleaning filter Compact filter Consists of: HEPA filter H13, wide band gas filter (50 % active carbon, 50 % Puratex) Compact filter Consists of: HEPA filter H13, wide band gas filter (100 % active carbon) Fine dust filter F7 (3 pieces) Compact filter with enlarged pre-filter Order No. 005 36 410 99 005 36 407 99 005 36 421 99 005 36 597 99 Spare filter for WFE P: Compact filter Consists of: HEPA filter H13, wide band gas filter (50 % active carbon, 50 % Puratex) Compact filter Consists of: HEPA filter H13, wide band gas filter (100 % active carbon) Fine dust filter F7 (3 pieces) Compact filter with enlarged pre-filter 25 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 25 21.04.2009 13:26:30 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Tip Extraction Installation Options Installation option for a central system with WFE P KH E Stop + Go-support WDD 161V WFE P soldering iron desoldering iron Installation option for a central and stand alone system with WFE 20D central system stand alone system with pipe system 50 upto ca. 200 m right angle pipe 50 005 36 322 99 extraction hose 5 mm > 2,5 m bis max. 10 m 005 25 410 00 WSD 81 connecting element 40-50 005 36 415 99 WMD 3 pipe 50 005 36 323 99 double socket 50 005 36 319 99 connecting element 40-50 005 36 415 99 T-piece 50 005 36 344 99 pipe 50 005 36 323 99 connecting nipple for extraction hose 5 mm 005 36 338 99 branch 50 005 36 321 99 pipe clamps 50 005 36 329 99 connecting nipple for hose 17 005 36 358 65 end seal 50 005 36 324 99 pipe 50 005 36 323 99 end seal 50 005 36 324 99 extraction hose 40 005 36 414 00 extension hose 17 005 36 326 99 adapter 17 005 36 343 99 WFE 20D RS 232 cable (2 m) 005 31 191 99 remote control 005 87 359 09 26 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 26 21.04.2009 13:26:33 Uhr PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf Pipe Systems for Tip and Volume Extraction Pipe System 50 Tip Extraction Pipe System 75 Volume Extraction Tip extraction systems demand a high quality, constant level of vacuum across the installation. To achieve this it is necessary to use a pipe system with a relatively small diameter. The Weller(R) pipe system 50 allows extraction installations of up to 200 m (7874 in) when used with the WFE 20D unit in a stand alone system. The pipe sections are designed to join together and have internal sealing bushes. In a central system, the FE soldering irons are connected directly to the fume extraction units. Volume extraction systems require a large volume of air to be extracted and the level of vacuum is of lesser importance. This means that a relatively large diameter pipe system is required. If the pipe diameter is too small the flow resistance is increased and extraction capacity reduced. The pipe system 75 allows installations up to 30 m (1191.1 in) with the WFE 4S used in a stand alone system. The pipe sections are designed to join together and have internal sealing bushes. Order No. Pipe System 50 005 36 323 99 Pipe System 70 005 87 358 70 Description 005 36 322 99 005 87 358 69 Right angle pipe, 90, 0,2 m (7.87 in), with seal at one end. PEHD*, black. 005 36 344 99 005 87 358 71 T-piece, 2 x 90, 0,5 m (19.68 in), with 3 seals. PEHD*, black. Pipe, 2 m (78.74 in), with seal at one end. PEHD*, black. 005 36 321 99 Branch, 2 x 45, 0,3 m (11.81 in), with 2 seals. PEHD*, black. 005 36 319 99 Double socket. PEHD*, black. 005 36 324 99 005 87 358 55 End seal. Plastic, transparent. 005 36 329 99 005 87 358 64 Pipe clamps for pipes, e.g. for securing to wall. Plastic, grey. 005 87 358 63 Adapter pipe system 75 to pipe system 50 with seals. 005 87 358 56 Adapter PEHD* pipe system 75 to pipe system 50, without seals. *PEHD = Polyethylen High Density 27 PA01005862_gb.pdf WFE_09_GB_04.2009.indd 27 21.04.2009 13:26:39 Uhr G E R MA N Y U SA FRAN CE Cooper Tools GmbH Carl-Benz-Strae 2 74354 Besigheim Tel: (07143) 580-0 Fax: (07143) 580- 108 Cooper Hand Tools World Headquarters 1000 Lufkin Road Apex, NC 27539 USA Tel: (919) 387 0099 Fax: (919) 387 2614 Cooper Tools S.A.S. 25 Rue Maurice Chevalier BP 46 77832 Ozoir-la-Ferriere Cedex Tel: (01) 60.18.55.40 Fax: (01) 64.40.33.05 I TA LY SWIT ZERLAN D GREAT Cooper Italia S.r.l. Viale Europa 80 20090 Cusago (MI) Tel: (02) 9033101 Fax: (02) 90394231 Erem S.A. Rue de la Roseliere 8 1400 Yverdon-les-Bains Tel: (024) 426 12 06 Fax: (024) 425 09 77 Cooper Tools A Division of Cooper (GB) Ltd. 4th Floor Pennine House Washington, Tyne & Wear NE37 1LY Tel: (0191) 419 7700 Fax: (0191) 417 9421 C A N A DA C H INA AUSTRALIA Cooper Hand Tools - Canada 164 Innisfil Street Barrie, Ontario Canada L4N 3E7 Tel: (705) 728 5564 Fax: (800) 403 8665 Cooper Hand Tools 18th Floor, Yu An Building 738 Dongfang Road Pudong, Shanghai 200122 China Tel: (21) 5111 8300 Fax: (21) 5111 8446 Cooper Tools Pty. Limited P.O. Box 366 519 Nurigong Street Albury, N.S.W. 2640 Australia Tel: (2) 6058-0300 Fax: (2) 6021-7403 PA01005862_gb.pdf PA01005862_gb.pdf PA01005862_gb.pdf BRITAIN www.coopertools.eu www.weller.eu (c) 2009, Cooper Industries, Inc. PA01005862_gb.pdf WFE_09_GB_04.2009.indd 28 005 56 171 06 / 04.09 WD 5.0 21.04.2009 13:26:39 Uhr