3
LAN
Application:
• Voice
• Fast Ethernet(IEEE802.3u)
• 100Vg-AnyLAN(IEEE 802.12)
• Token Ring(IEEE 802.5)
• TP-PMD(ANSI X3T9.5)
• 100Base-T Ethernet(IEEE 802.5)
• 155/622 Mbps 1.2/ 2.4 Gbps ATM
• 1000Base-T Ethernet
• 550 MHz Broadband Vedio
Industry Standard:
• UL, C(UL), ETL Verified
• TIA/EIA 568B
• ISO/IEC 11801
• EN 50173
Cable Data:
• No. of Pairs:4
• Jacket Color:Gray
• Insulation Thickness: 0.33mm
• Nom.O.D.:6.5mm
• Flame Rating:CM
• Package: Reel, 305m(1,000ft)/ box
• Transmission quality verified up to 250MHz
Cat.6 4 Pair UTP Cable
P/N Description
• Conductor:24AWG Bare Solid Copper
• Insulation:HDPE, FRPE, 100%FEP
• Ripcord:Under jacket (For Bare Solid Copper)
• Jacket:FRPVC
1101-04001
Frequency Attenuation Max. NEXT Power Sum EFLEXT
(MHz) dB/100M dB/100m Minimum dB/100m (dB/ 100m)
1
4
10
16
20
31.25
62.5
100
200
250
2.0
3.8
6.0
7.6
8.5
10.7
15.5
19.9
29.2
33.0
74.3
65.3
59.3
56.2
54.8
51.9
47.4
44.3
39.8
38.3
72.3
63.3
57.3
54.2
52.8
49.9
45.4
42.3
37.8
36.3
Product Electrical Characteristics:
• Impedance:100 ±15 ohms
• Mutual Capacitance, max. nf/ 100m: 5.6
• DC Resistance, max. Ohms/ 100m: 9.38
• Capacitance Unbalance(Pair to Ground):
330pf/ 100m max.
67.0
55.0
46.8
42.7
40.8
36.9
30.9
26.8
20.8
18.8
4LAN
Cat.6 UTP Patch Cord
P/N Description
1201-04002 Cat.6 4 Pair UTP Patch Cord, 2 meter (Gray color)
1201-04003 Cat.6 4 Pair UTP Patch Cord, 3 meter (Gray color)
1201-04004 Cat.6 4 Pair UTP Patch Cord, 5 meter (Gray color)
1201-04002
Application:
• Voice
• Fast Ethernet(IEEE802.3u)
• 100Vg-AnyLAN(IEEE 802.12)
• Token Ring(IEEE 802.5)
• TP-PMD(ANSI X3T9.5)
• 100Base-T Ethernet(IEEE 802.5)
• 155/622 Mbps 1.2/ 2.4 Gbps ATM
• 1000Base-T Ethernet
• 550 MHz Broadband Vedio
Industry Standard:
• UL, C(UL), ETL Verified
• TIA/EIA 568B
• ISO/IEC 11801
• EN 50173
Product Description:
• Molded boots prevent pin from bending and cables from kink
• Fully tested to meet EIA/ TIA-568B Category 6 requirements
• Category 6 stranded 24AWG wires provides maximum flexibility
• ETL verified to EIA/ TIA-568B specifications
• UL, C(UL) listed
• Wiring: T568B
• For special requirements please contact with us
5
LAN
Cat.6 Keystone Jack
Industry Standard:
• UL, C(UL) listed
• Meets FCC parts 68
• ANSI/TIA/ EIA-568B
• ISO/IEC 11801
• ETL verified EIA/TIA T568B:Cat.6 channel link
transmission performance
Physicals:
• IDC connector accept 22-26 AWG solid
wire
• Jack wiring:50 u” gold plated over 100 u”
nickel
• Housing:High impact flame retardant
plastic UL94V-0 rated
• IDC connector suitable for 110 punch
down and Krone tool
Mechanical:
• Plug insertion life:750 cycle min.
• Plug retention force:30 lbs min.
Electrical:
• Current rating:1.5 Amps
• Insulation resistance:500Mega-ohms min.
• Contact resistance:20 Milli-ohms max.
• DC resistance:0.1 ohms max.
• Data transmission rates up to 250Mbps
P/N Description
1305-04002 Cat.6 110/ Krone right-angle (90º) Keystone Jack, T568A/ B
1305-04003 Cat.6 110/ Krone vertical (180º) Keystone Jack, T568A/ B
1305-04003
Compliant Press fit IDC
connector terminal for
high frequency
application
IDC connector with large
spacer of each pair to
improve crosstalk
1305-04002
• Package: 100 pcs/ box
NEW
6LAN
Cat.6 Unshielded Patch Panel
110 Enhanced Cat.6 Patch Panel:
• High performance, exceed EIA/ TIA 568B Category 6 channel link requirements
• 110 and Krone dual type IDC termination
• 19” 24 port patch panel, 1U size & 48 port panel, 2U size
• Accepts 22-26 AWG, stranded or solid wire
• Wiring:T568A/ B
• Optional rear cable management
1402-04001
P/N Description
1402-04001 Cat.6 19” 110/ krone dual type Patch Panel 24 ports, 1U size
1402-04003 Cat.6 19” 110/ krone dual type Patch Panel 48 ports, 2U size
1499-00001 19” Rear cable management
Compliant Press fit IDC
connector terminal for high
frequency application
IDC connector with large
spacer of each pair to
improve crosstalk
High-low contact design to
improve transmission
performance
1499-00001
NEW
7
LAN
• Labels are placed on top of label holders.
• Exceeds TIA/EIA 568 Category 6 performance specifications
• Terminates 22 AWG through 26 AWG solid or stranded wire
• Wiring blocks and connecting blocks sold separately
• 19” Cross-Connect Panel make terminatins from the front
Cat.6 110 Cross-Connect Block & Panel
Cat.6 110 to RJ-45(110) Patch Cord
• Make quick, simple 110-bolck connections
• Category 6 stranded cable, colored pvc jacket
• 110 to RJ-45 type to convert one channel on a 110
block to a modular jack
• 110 to 110 type to link two 110 blocks
• Wiring: T568B(110 to RJ-45 type), straight-through
(110 to 110 type)
P/N Description
110 to RJ-45 type 110 to 110 type
1801-01003 Wiring blocks w/Mounting legs, w/ label holder, w/ o connecting blocks, 50pair
1801-02004 Wiring blocks w/Mounting legs, w/ label holder, w/ o connecting blocks,100pair
1802-01005 Wiring blocks w/o mounting legs, w/ label holder, w/ o connecting blocks,50pair
1802-02002 Wiring blocks w/o mounting legs, w/ label holder, w/ o connecting blocks,100pair
1804-03002 Cat.6 Connecting blocks, 4pair (100 pcs/ bag)
1804-04001 Cat.6 Connecting blocks, 5pair (100 pcs/ bag)
1803-02003 Cat.6 19” cross-connect panel, 100pair
1202-04001 Cat.6 Patch cord T568B(110 to RJ-45 type), 3meter
1203-04001 Cat.6 Patch cord T568B(110 to 110 type), 3 meter
1803-02003
1202-04001 1203-04001
w/Mounting legs
Connecting blocks
4 pair: 1804-03002
5 pair: 1804-04001
w/o Mounting legs
50 pair: 1801-01003
100 pair: 1801-02004
50 pair: 1802-01005
100 pair: 1802-02002
8LAN
110 Cross-Connect Block Installation Step
Step 1:
Mount the wiring base and legs onto a
suitable mounting surface with the
necessary screws and hardware. Then
lace the cables through the appropriate
openings in the wiring base.
Step 2:
Strip off the cable jacket with the jacket
stripped tool.
Step 3:
Seating the wire in accordance with the
wiring schemes (see page No.57 to page
No.58) onto the wiring base.
Step 4:
Seating the conductors and trim off the
excess wire with the cutting edge of the
impact tool.
Step 5:
Insert an 4 pair or 5 pair of 110
connecting block into the head of the
impact tool.
Step 6:
seating the 110 connecting block with the
impact tool onto the wiring base.
