RPC Series Stackpole Electronics, Inc. Pulse Withstanding Thick Film Chip Resistor Features: * * * * * Resistive Product Solutions Excellent pulse withstanding performance Broad resistance range Higher anti-surge performance compared with RMC Series Stability class: 5% RoHS compliant / lead-free Electrical Specifications Type / Code Power Rating (Watts) @ 70C Maximum Working Voltage (1) RPC0603 0.1W (2) 50V RPC0805 0.25W (2) 150V RPC1206 0.33W (2) 200V RPC1210 0.5W (2) 200V RPC2010 0.75W 400V RPC2512 1.5W 500V Resistance Temperature Coefficient 100 ppm/C 200 ppm/C 100 ppm/C 200 ppm/C 100 ppm/C 200 ppm/C 100 ppm/C 200 ppm/C 100 ppm/C 200 ppm/C 100 ppm/C 200 ppm/C Ohmic Range () and Tolerance 1%, 5%, 10%, 20% (3) 300 - 1M 10 - 299 300 - 20M 1 - 299 20.1 - 20M 1 - 20 20.1 - 20M 1 - 20 20.1 - 20M 1 - 20 20.1 - 20M 1 - 20 (1) Lesser of PR or maximum working voltage (2) Higher power ratings available. Contact factory for available resistance ranges, tolerances and TCR's. (3) 0.5% tolerances may be availabe for some resistance values. Contact factory for availability. Mechanical Specifications Type / Code L Body Length W Body Width H Body Height a Top Termination b Bottom Termination Unit RPC0603 0.063 0.004 1.60 0.10 0.031 0.004 0.80 0.10 0.018 0.004 0.45 0.10 0.012 0.008 0.30 0.20 0.012 0.008 0.30 0.20 inches mm RPC0805 0.079 0.004 2.00 0.10 0.049 0.004 1.25 0.10 0.022 0.006 0.55 0.15 0.014 0.010 0.35 0.25 0.016 0.008 0.40 0.20 inches mm RPC1206 0.126 0.006 3.20 0.15 0.063 0.006 1.60 0.15 0.022 0.004 0.55 0.10 0.020 0.016 0.50 0.40 0.020 0.010 0.50 0.25 inches mm RPC1210 0.126 0.006 3.20 0.15 0.098 0.006 2.50 0.15 0.022 0.006 0.55 0.15 0.020 0.010 0.50 0.25 0.020 0.010 0.50 0.25 inches mm RPC2010 0.197 0.008 5.00 0.20 0.098 0.006 2.50 0.15 0.022 0.006 0.55 0.15 0.024 0.020 0.60 0.50 0.020 0.012 0.50 0.30 inches mm RPC2512 0.250 0.008 6.35 0.20 0.126 0.006 3.20 0.15 0.022 0.006 0.55 0.15 0.024 0.020 0.60 0.50 0.020 0.012 0.50 0.30 inches mm Rev Date: 06/19/2012 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 1 www.seielect.com marketing@seielect.com RPC Series Stackpole Electronics, Inc. Pulse Withstanding Thick Film Chip Resistor Resistive Product Solutions Performance Characteristics Test Test Methods (JIS C 5201-1 : 1198) Test Results Voltage Proof Clause 4.7 500Va.a., 60s No breakdown or flashover R 1G Ohm Variation of Resistance with Temperature Clause 4.8 +20C/ -55C / +20C/ +125C/ +20C: RPC 2010, 2512 +20C/ -55C/ +20C/ +155C/ +20C: RPC 0603, 0805, 1206, 1210 See ratings table Overload Clause 4.13 The applied voltage shall be 2.5 times of the rated voltage or twice of the limiting element voltage, whichever is the less severe, 2s. R 1% +0.05 No visible damage, legible markings Solderability Clause 4.17 235C, 2s. In accordance with Clause 4.17.4.5 Resistance to Soldering Heat Clause 4.18 After immersion into the flux, the immersion into solder shall be carried out in solder bath at 260 for 5s. R 1% +0.05 Rapid Change of Temperature Clause 4.19 Cycle: -55C/ +125C 5 times: RPC 2010, 2512 Cycle: -55C/ +155C 5 times: RPC 0603, 0805, 1206, 1210 R 1% +0.05 No visible damage Climatic Sequence Clause 4.23 Dry/Damp heat (12+12h cycle), first cycle/ Cold/Damp heat (12+12h cycle), remaining cycle / D.C. Load R 5% +0.1 No visible damage Damp Test, Steady State Clause 4.24 40C, 95% R.H., 56 days, test a) and b) of Clause 4.24.2.1 Endurance @ 70C Clause 4.25.1 Rated voltage, 1.5h "ON", 0.5h "OFF", 70C, 1,000h Endurance at the Upper Category Temperature Adhesion Bend of Strength of the Face Plating Clause 4.25.3 125C, no load, 1.000h: RPC 2010, 2512 155C, no load, 1.000h: RPC 0603, 0805, 1206, 1210 Clause 4.32 5N, 10s Clause 4.33 Amount of bend: 3mm RPC 0603, 0805, 1206, 1210 Amount of bend: 1mm RPC 2010, 2512 Operating Temperature Range: R 5% +0.1 No visible damage, legible markings R 5% +0.1 No visible damage R 5% +0.1 No visible damage No visible damage R 1% +0.05 -55C to +155C Power Derating Curve: Percent Rated Power (%) 100 -55C 70C 80 60 40 20 0 -60 Rev Date: 06/19/2012 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 155C -40 -20 2 0 20 40 60 80 100 Ambient Temperature (C) 120 140 160 180 www.seielect.com marketing@seielect.com RPC Series Stackpole Electronics, Inc. Pulse Withstanding Thick Film Chip Resistor Resistive Product Solutions Lightning Surge Resistors are tested in accordance with IEC 60115-1 using both 1.2/50us and 10/700 pulse shapes. The limit of acceptance is a shift in resistance of less than 1% from the initial value. 10/700us Lightning Surge - 1% Peak Voltage (Volts) . 10,000 2512 2010 1,000 1206 0805 100 10 1 10 100 1,000 10,000 100,000 1,000,000 10,000,000 Resistance (Ohms) Test Condition: IEC 60115-1 1.2/50us Lightning Surge - 1% 10,000 Peak Voltage (Volts) . 2512 2010 1206 0805 1,000 100 10 1 10 100 1,000 10,000 Resistance (Ohms) Rev Date: 06/19/2012 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 3 100,000 1,000,000 10,000,000 Test Condition: IEC 60115-1 www.seielect.com marketing@seielect.com RPC Series Stackpole Electronics, Inc. Pulse Withstanding Thick Film Chip Resistor Resistive Product Solutions Pulse Withstand Capacity The single impulse graph is the result of 50 impulses of rectangular shape applied at one minute intervals. The limit of acceptance was a shift in resistance of less than 1% from the initial value. The power applied was subject to the restrictions of the maximum permissible impulse voltage graph shown. Single Pulse Power (100 Ohm) - 1% Continuous Pulse The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average power dissipated in the resistor was equal to its rated power at 70C. Again the limit of acceptance was a shift in resistance of less than 1% from the initial value. Continuous Pulse Power (100 Ohm) - 1% Rev Date: 06/19/2012 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 4 www.seielect.com marketing@seielect.com RPC Series Stackpole Electronics, Inc. Pulse Withstanding Thick Film Chip Resistor Resistive Product Solutions Single Pulse Voltage (100 Ohm) - 1% 10,000 Pulse Voltage (V) 1,000 100 2512 2010 1206 0805 10 1 0.0001 0.001 0.01 0.1 1 Pulse Duration ti (s) Single Pulse Power (100 Ohm) - 5% Pulse Power P (W) 10,000 1,000 100 2512 2010 1210 1206 0805 10 1 0.0001 0.001 0.01 0.1 1 Pulse Duration ti (s) Rev Date: 06/19/2012 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 5 www.seielect.com marketing@seielect.com RPC Series Stackpole Electronics, Inc. Pulse Withstanding Thick Film Chip Resistor Resistive Product Solutions Continuous Pulse Power (100 Ohm) - 5% Pulse Power (W) 10,000 1,000 100 10 2512 2010 1210 1206 0805 1 0.0001 0.001 0.01 0.1 1 Pulse Duration Time (s) How to Order RPC 1 2 3 4 5 6 7 8 9 10 11 12 13 R P C 0 8 0 5 J T 1 0 M 0 Product Series Pulse Withstanding Size 0603 0805 1206 1210 2010 2512 Power 0.1W 0.25W 0.33W 0.5W 0.75W 1.5W Tolerance Code Tol Value E96 F 1% E24 J 5% E24 K 10% M 20% Code T G Packaging Description Size 0603 0805 7" Reel 1206 Paper Tape 1210 2010 7" Reel 2512 Plastic Tape 10" Reel 0805 Paper Tape 1206 Quantity 5,000 Resistance Value Four characters with the multiplier used as the decimal holder. 300 ohm = 300R 10.2 Kohm = 10K2 1 Mohm = 1M00 4,000 10,000 Legacy Part Number (before January 3, 2011): Type RPC SEI Type Code Nominal Resistance Tolerance Packaging RPC 0805 10M 5% R Description Pulse Withstanding Code Wattage 0603 0.1W 0805 0.25W 1206 0.33W 1210 0.5W 2010 0.75W 2512 1.5W Rev Date: 06/19/2012 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. Tolerance Values E96 1% E24 5% E24 10% 20% 6 SEI Types Pkg Qty 5,000 0603, 0805, 1206, 1210 10,000 0805, 1206 2010, 2512 4,000 Description 7" reel - paper tape 10" reel - paper tape 7" reel - plastic tape Code R G R www.seielect.com marketing@seielect.com