CLD-DS36 Rev 7B Product family data sheet/ bINNING AND lABELING dOCUMENT Cree(R) XLamp(R) MT-G EasyWhite(R) LEDs Product Description FEATURES Table of contents The XLamp Characteristics........................... 2 LED maximizes * Cree EasyWhite color temperatures from 2700 K to 5000 K CCT eliminates MT-G EasyWhite lumen density, chromaticity binning, and enables luminaire and bulb manufacturers to deliver consistent color and high efficacy light output in a new, compact, multi-die package. XLamp MT-G EasyWhite LEDs can reduce LED-to-LED color variation to within a 2step MacAdam ellipse, 94% smaller than the total area of the corresponding ANSI C78.377 Order Codes, Bins....................... 3 Relative Spectral Power Distribution............................... 6 * 85C binning and characterization Relative Luminous Flux vs. * Two voltage options: 6V, 36V Junction Temperature.................. 6 * Low effective thermal resistance: 1.5C/W Relative Luminous Flux vs Current .8 * High lumen density * Wide viewing angle: 120 Electrical Characteristics.............. 7 Typical Spatial Distribution........... 9 Performance Groups - Brightness. 9 Performance Groups - color region. * 80-minimum CRI at 2700K and 3000K CCT The XLamp MT-G EasyWhite LED is the perfect choice for lighting * 85- and 90-minimum CRI available in 2700K and 3000K CCT applications where high luminous * Electrically neutral thermal path Standard Order Codes and Bins .12 * RoHS- and REACh-compliant Reflow Soldering Characteristics..13 * UL-recognized component (E349212) Notes.......................................14 flux output is required from a single, small point source. Example applications include: LED retrofit bulbs, commercial/retail display spotlights, and other indoor general WWW.CREE.COM/XLAMP * Wide range of operating power up to 25W Flux Characteristics, Standard illumination applications. Chromaticity.............................10 Cree EasyWhite Color Temperatures Plotted on the 1931 CIE Curve....11 Bin and Order Code Format.........11 Mechanical Dimensions..............15 Tape and Reel...........................16 Applications Packaging.................................17 * MR, PAR and other directional retrofit bulbs * Commercial/residential directional lighting * General illumination Copyright (c) 2011-2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo, XLamp(R) and EasyWhite(R) are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp xlamp MT-G EasyWhite LEDs Characteristics Characteristics Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) Effective thermal resistance, junction to solder point Unit degrees Minimum Typical 120 V C/W Maximum 8000 1.5 LED junction temperature C DC forward current (6V) mA 1100 4000 DC forward current (36V) mA 185 700 Forward voltage (6V, 1100mA, 85C) V 5.6 6.7 Forward voltage (36V, 185mA, 85C) V 33.5 40.2 Temperature coefficient of voltage (6V) mV/C -4.5 Temperature coefficient of voltage (36V) mV/C -27 Reverse voltage (6V) Reverse current (6V, 36V) 150 V -5 mA 0.1 (R) (R) (R) Copyright (c) 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc. 2 xlamp MT-G EasyWhite LEDs Flux Characteristics, Standard Order Codes, Bins, 6 VolT MT-G (1100mA, Tj=85C) The following table provides several base order codes for 6 Volt XLamp MT-G EasyWhite LEDs. For a complete description of the order-code nomenclature, please reference page 11 of this document. Color CCT Range 5000 K 4000 K Standard CRI EasyWhite 3500 K 3000 K 2700 K Base Order Codes Min. Luminous Flux @ 1100mA 2-Step Order Code 4-Step Order Code Group Flux (lm) @ 85C Flux (lm) @ 25C* H0 560 642 J0 600 688 K0 650 745 MTGEZW-00-0000-0B00K050H MTGEZW-00-0000-0B00K050F G0 520 596 MTGEZW-00-0000-0B00G040H MTGEZW-00-0000-0B00G040F H0 560 642 Chromaticity Region Chromaticity Region MTGEZW-00-0000-0B00H050H 50H 40H MTGEZW-00-0000-0B00J050H MTGEZW-00-0000-0B00H040H MTGEZW-00-0000-0B00H050F 50F 40F MTGEZW-00-0000-0B00J050F MTGEZW-00-0000-0B00H040F J0 600 688 MTGEZW-00-0000-0B00J040H MTGEZW-00-0000-0B00J040F F0 480 550 MTGEZW-00-0000-0B00F035H MTGEZW-00-0000-0B00F035F G0 520 596 H0 560 642 MTGEZW-00-0000-0B00H035H MTGEZW-00-0000-0B00H035F F0 480 550 MTGEZW-00-0000-0B00F030H MTGEZW-00-0000-0B00F030F G0 520 596 H0 560 642 MTGEZW-00-0000-0B00H030H MTGEZW-00-0000-0B00H030F E0 440 504 MTGEZW-00-0000-0B00E027H MTGEZW-00-0000-0B00E027F F0 480 550 G0 520 596 35H 30H 27H MTGEZW-00-0000-0B00G035H MTGEZW-00-0000-0B00G030H MTGEZW-00-0000-0B00F027H MTGEZW-00-0000-0B00G027H 35F 30F 27F MTGEZW-00-0000-0B00G035F MTGEZW-00-0000-0B00G030F MTGEZW-00-0000-0B00F027F MTGEZW-00-0000-0B00G027F Notes: * * * * * * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. Minimum CRI for EasyWhite color temperatures 27F, 27H, 30F, 30H is 80. Minimum CRI for EasyWhite color temperatures 35F, 35H, 40F, 40H is 77. Typical CRI for EasyWhite color temperatures 35F, 35H, 40F, 40H is 80. Minimum CRI for EasyWhite color temperature 50F, 50H is 75. Flux values @ 25C are calculated and for reference only. (R) (R) (R) Copyright (c) 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc. 3 xlamp MT-G EasyWhite LEDs Flux Characteristics, Standard Order Codes, Bins, 36 VolT MT-G (185mA, Tj=85C) The following table provides several base order codes for 36 Volt XLamp MT-G EasyWhite LEDs. For a complete description of the order-code nomenclature, please reference page 11 of this document. Color CCT Range 5000 K 4000 K Standard CRI EasyWhite 3500 K 3000 K 2700 K Base Order Codes Min. Luminous Flux @ 185mA 2-Step Order Code 4-Step Order Code Group Flux (lm) @ 85C Flux (lm) @ 25C* H0 560 647 J0 600 693 K0 650 751 MTGEZW-00-0000-0N00K050H MTGEZW-00-0000-0N00K050F G0 520 601 MTGEZW-00-0000-0N00G040H MTGEZW-00-0000-0N00G040F H0 560 647 J0 600 693 MTGEZW-00-0000-0N00J040H MTGEZW-00-0000-0N00J040F F0 480 555 MTGEZW-00-0000-0N00F035H MTGEZW-00-0000-0N00F035F G0 520 601 H0 560 647 MTGEZW-00-0000-0N00H035H MTGEZW-00-0000-0N00H035F F0 480 555 MTGEZW-00-0000-0N00F030H MTGEZW-00-0000-0N00F030F G0 520 601 H0 560 647 MTGEZW-00-0000-0N00H030H MTGEZW-00-0000-0N00H030F E0 440 508 MTGEZW-00-0000-0N00E027H MTGEZW-00-0000-0N00E027F F0 480 555 G0 520 601 Chromaticity Region Chromaticity Region MTGEZW-00-0000-0N00H050H 50H MTGEZW-00-0000-0N00J050H 40H MTGEZW-00-0000-0N00H040H 35H MTGEZW-00-0000-0N00G035H 30H MTGEZW-00-0000-0N00G030H 27H MTGEZW-00-0000-0N00F027H MTGEZW-00-0000-0N00H050F 50F MTGEZW-00-0000-0N00J050F 40F MTGEZW-00-0000-0N00H040F 35F MTGEZW-00-0000-0N00G035F 30F MTGEZW-00-0000-0N00G030F 27F MTGEZW-00-0000-0N00F027F MTGEZW-00-0000-0N00G027H MTGEZW-00-0000-0N00G027F Flux Characteristics, Standard Order Codes, Bins, 85 cri, 6 VolT MT-G (1100mA, Tj=85C) Color CCT Range 3000 K 85 CRI EasyWhite 2700 K Base Order Codes Min. Luminous Flux @1100mA Group Flux (lm) @ 85C Flux (lm) @ 25C* D0 400 458 E0 440 504 F0 480 550 D0 400 458 E0 440 504 2-Step Order Code Chromaticity Region 4-Step Order Code Chromaticity Region MTGEZW-00-0000-0B0PD030H 30H MTGEZW-00-0000-0B0PE030H MTGEZW-00-0000-0B0PD030F 30F MTGEZW-00-0000-0B0PF030H 27H MTGEZW-00-0000-0B0PD027H MTGEZW-00-0000-0B0PE027H MTGEZW-00-0000-0B0PE030F MTGEZW-00-0000-0B0PF030F 27F MTGEZW-00-0000-0B0PD027F MTGEZW-00-0000-0B0PE027F Notes: * * * * * * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. Minimum CRI for EasyWhite color temperatures 27F, 27H, 30F, 30H is 80. Minimum CRI for EasyWhite color temperatures 35F, 35H, 40F, 40H is 77. Typical CRI for EasyWhite color temperatures 35F, 35H, 40F, 40H is 80. Minimum CRI for EasyWhite color temperature 50F, 50H is 75. Flux values @ 25C are calculated and for reference only. (R) (R) (R) Copyright (c) 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc. 4 xlamp MT-G EasyWhite LEDs Flux Characteristics, Standard Order Codes, Bins, 85 cri, 36 VolT MT-G (185mA, Tj=85C) Color CCT Range 3000 K 85 CRI EasyWhite 2700 K Base Order Codes Min. Luminous Flux @ 185mA Group Flux (lm) @ 85C Flux (lm) @ 25C* D0 400 462 E0 440 508 F0 480 555 D0 400 462 E0 440 508 2-Step Order Code Chromaticity Region 4-Step Order Code Chromaticity Region MTGEZW-00-0000-0N0PD030H 30H MTGEZW-00-0000-0N0PE030H MTGEZW-00-0000-0N0PD030F 30F MTGEZW-00-0000-0N0PE030F MTGEZW-00-0000-0N0PF030H MTGEZW-00-0000-0N0PD027H 27H MTGEZW-00-0000-0N0PE027H MTGEZW-00-0000-0N0PF030F MTGEZW-00-0000-0N0PD027F 27F MTGEZW-00-0000-0N0PE027F Flux Characteristics, Standard Order Codes, Bins, 90 cri, 6 VolT MT-G (1100mA, Tj=85C) Color CCT Range Base Order Codes Min. Luminous Flux @1100mA Group 3000 K 90 CRI EasyWhite 2700 K Flux (lm) @ 85C Flux (lm) @ 25C* 2-Step Order Code Chromaticity Region 4-Step Order Code Chromaticity Region C0 370 424 D0 400 458 MTGEZW-00-0000-0B0UC030H E0 440 504 MTGEZW-00-0000-0B0UE030H MTGEZW-00-0000-0B0UE030F B0 340 390 MTGEZW-00-0000-0B0UB027H MTGEZW-00-0000-0B0UB027F C0 370 424 D0 400 458 30H MTGEZW-00-0000-0B0UD030H 27H MTGEZW-00-0000-0B0UC027H MTGEZW-00-0000-0B0UC030F 30F MTGEZW-00-0000-0B0UD030F 27F MTGEZW-00-0000-0B0UC027F MTGEZW-00-0000-0B0UD027H MTGEZW-00-0000-0B0UD027F Flux Characteristics, Standard Order Codes, Bins, 90 cri, 36 VolT MT-G (185mA, Tj=85C) Color CCT Range 3000 K 90 CRI EasyWhite 2700 K Base Order Codes Min. Luminous Flux @ 185mA 2-Step Order Code 4-Step Order Code Group Flux (lm) @ 85C Flux (lm) @ 25C* C0 370 428 D0 400 462 E0 440 508 MTGEZW-00-0000-0N0UE030H MTGEZW-00-0000-0N0UE030F B0 340 393 MTGEZW-00-0000-0N0UB027H MTGEZW-00-0000-0N0UB027F C0 370 428 D0 400 462 Chromaticity Region Chromaticity Region MTGEZW-00-0000-0N0UC030H 30H 27H MTGEZW-00-0000-0N0UD030H MTGEZW-00-0000-0N0UC027H MTGEZW-00-0000-0N0UD027H MTGEZW-00-0000-0N0UC030F 30F 27F MTGEZW-00-0000-0N0UD030F MTGEZW-00-0000-0N0UC027F MTGEZW-00-0000-0N0UD027F Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Flux values @ 25C are calculated and for reference only. (R) (R) (R) Copyright (c) 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc. 5 xlamp MT-G EasyWhite LEDs Relative Spectral Power Distribution White Relative Spectral Power Distribution (6V, 1100mA; 36V, 185mA; TJ= 85C) The following graph represents typical spectral output of each die of the MT-G The following graph represents typical spectral output of the XLamp MT-G EasyWhite LED. 100% Relative Spectral Power Warm White Cool White 80% 60% 40% 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs. Junction Temperature (If = 1100 mA, or 1 Luminous Junction Temperature (6V,MT-G 1100ma; 36V, 185mA) TheRelative following graph represents Flux typical vs. performance of each LED die in the XLamp The following graph represents typical performance of the XLamp MT-G EasyWhite LED. Relative Luminous Flux 120% 100% 80% 60% 40% 20% 0% 20 40 60 80 100 120 140 Junction Temperature (C) (R) (R) (R) Copyright (c) 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc. 6 xlamp MT-G EasyWhite LEDs Electrical Characteristics (Tsp = 85C) 6V Electrical Characteristics (TJ = 85C) 4000 3500 Current (mA) 3000 2500 2000 MT-G 6 V 1500 1000 500 0 5 5.25 5.5 36V 5.75 6 6.25 Forward Voltage V 700 600 Current (mA) 500 400 MT-G 36 V 300 200 100 0 31.00 32.00 33.00 34.00 35.00 36.00 37.00 38.00 Forward Voltage V (R) (R) (R) Copyright (c) 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc. 7 xlamp MT-G EasyWhite LEDs Relative Intensity vs. Current (Tsp = 85C) Relative Luminous Flux vs Current (TJ = 85C) Relative Luminous Flux 300% 250% 200% 150% MT-G 6 V 100% 50% 0% 0 or 183.33 if @ 36V) 500 1000 1500 2000 2500 3000 3500 4000 Forward Current, Pulsed (mA) Relative Luminous Flux 300% 250% 200% 150% MT-G 36 V 100% 50% 0% 0 100 200 300 400 500 600 700 Forward Current, Pulsed (mA) (R) (R) (R) Copyright (c) 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc. 8 xlamp MT-G EasyWhite LEDs Spatial Distribution Typical Spatial Distribution The following graph represents typical performance of the XLamp MT-G EasyWhite LED. Relative Luminous Intensity 100% 80% 60% 40% 20% -90 -60 -30 0% 0 30 60 90 Angle () Performance Groups - Brightness (TJ = 85C) XLamp MT-G EasyWhite LEDs are tested for luminosity and placed into one of the following bins. Group Code Min. Luminous Flux @ 1100mA, 6V; @185mA, 36V Max. Luminous Flux @ 1100mA, 6V; @185mA, 36V A0 310 340 B0 340 370 C0 370 400 D0 400 440 E0 440 480 F0 480 520 G0 520 560 H0 560 600 J0 600 650 K0 650 700 (R) (R) (R) Copyright (c) 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc. 9 xlamp MT-G EasyWhite LEDs Performance Groups - Chromaticity (TJ = 85C) XLamp MT-G EasyWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures - 4-Step EasyWhite Color Temperatures - 2-Step Code Code 50F 40F 35F 30F 27F CCT 5000K 4000K 3500K 3000K 2700K x y 0.3407 0.3459 0.3415 0.3586 x y 0.3429 0.3507 0.3434 0.3571 0.3499 0.3654 0.3484 0.3521 0.3475 0.3604 0.3469 0.3539 0.3744 0.3782 0.3685 0.3784 0.3741 0.3837 0.3804 0.3912 0.3917 0.3818 0.3867 0.3857 0.3863 0.3981 0.3758 0.3844 0.3778 0.3800 0.4030 0.3857 0.4040 0.3966 0.4061 0.3941 0.4186 0.4037 0.4132 0.3976 0.4116 0.3865 0.4099 0.3890 0.4242 0.3919 0.4291 0.3973 0.4322 0.4096 0.4333 0.4062 0.4449 0.4141 0.4395 0.4084 0.4359 0.3960 0.4351 0.3994 0.4475 0.3994 0.4528 0.4046 0.4573 0.4178 0.4578 0.4138 0.4695 0.4207 0.4638 0.4152 0.4589 0.4021 0.4586 0.4060 50H 40H 35H 30H 27H CCT 5000K 4000K 3500K 3000K 2700K (R) (R) (R) Copyright (c) 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc. 10 xlamp MT-G EasyWhite LEDs Cree EasyWhite Color Temperatures Plotted on the 1931 CIE Curve (TJ = 85C) 0.45 ANSI C78.377 Quadrangle EasyWhite 4-step EasyWhite 2-step 0.44 2700K 3000K 0.43 3500K 0.42 4000K 0.41 4500K 0.40 5000K CCy 0.39 5700K 0.38 0.37 0.36 0.35 0.34 0.33 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.32 CCx Bin and Order Code Format Bin codes and order codes are configured as follows: Order CodeBin Code Series MTG = MT-G SSSCCC-BB-HHHH-NNNRNNNNN Series MTG = MT-G Internal code Internal code Internal code Flux bin CRI Specification U = 90 min CRI P = 85 min CRI 0 = standard CRI CRI Specification U = 90 min CRI P = 85 min CRI H = 80 min CRI E = 77 min CRI D = 75 min CRI Kit code Vf class: B0 = 6-V class N0 = 36-V class Reel size 0 = 500 (standard) 1 = 100 (nonstandard) Color EZW = EasyWhite SSSCCC-BB-WWW-FF-NNRAAAA Internal Code Vf class: B0 = 6-V class N0 = 36-V class Chromaticity bin Color EZW = EasyWhite (R) (R) (R) Copyright (c) 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc. 11 xlamp MT-G EasyWhite LEDs Standard Order Codes and Bins (XLamp MT-G EasyWhite) XLamp MT-G EasyWhite LED Standard Order Codes Min. Luminous Flux (lm) @ Tj=85C, 6V, 1100 mA @ Tj=85C, 36V, 185 mA Group Chromaticity Regions 6V Order Code 27F MTGEZW-00-0000-0B00D027F MTGEZW-00-0000-0N00D027F 27H MTGEZW-00-0000-0B00D027H MTGEZW-00-0000-0N00D027H 27F MTGEZW-00-0000-0B00E027F MTGEZW-00-0000-0N00E027F 27H MTGEZW-00-0000-0B00E027H MTGEZW-00-0000-0N00E027H 36V Order Code Flux (lm) EasyWhite D0 E0 F0 G0 H0 J0 K0 400 440 480 520 560 600 650 30F MTGEZW-00-0000-0B00E030F MTGEZW-00-0000-0N00E030F 30H MTGEZW-00-0000-0B00E030H MTGEZW-00-0000-0N00E030H 35F MTGEZW-00-0000-0B00E035F MTGEZW-00-0000-0N00E035F 35H MTGEZW-00-0000-0B00E035H MTGEZW-00-0000-0N00E035H 27F MTGEZW-00-0000-0B00F027F MTGEZW-00-0000-0N00F027F 27H MTGEZW-00-0000-0B00F027H MTGEZW-00-0000-0N00F027H 30F MTGEZW-00-0000-0B00F030F MTGEZW-00-0000-0N00F030F 30H MTGEZW-00-0000-0B00F030H MTGEZW-00-0000-0N00F030H 35F MTGEZW-00-0000-0B00F035F MTGEZW-00-0000-0N00F035F 35H MTGEZW-00-0000-0B00F035H MTGEZW-00-0000-0N00F035H 40F MTGEZW-00-0000-0B00F040F MTGEZW-00-0000-0N00F040F 40H MTGEZW-00-0000-0B00F040H MTGEZW-00-0000-0N00F040H 27F MTGEZW-00-0000-0B00G027F MTGEZW-00-0000-0N00G027F 27H MTGEZW-00-0000-0B00G027H MTGEZW-00-0000-0N00G027H 30F MTGEZW-00-0000-0B00G030F MTGEZW-00-0000-0N00G030F 30H MTGEZW-00-0000-0B00G030H MTGEZW-00-0000-0N00G030H 35F MTGEZW-00-0000-0B00G035F MTGEZW-00-0000-0N00G035F 35H MTGEZW-00-0000-0B00G035H MTGEZW-00-0000-0N00G035H 40F MTGEZW-00-0000-0B00G040F MTGEZW-00-0000-0N00G040F 40H MTGEZW-00-0000-0B00G040H MTGEZW-00-0000-0N00G040H 30F MTGEZW-00-0000-0B00H030F MTGEZW-00-0000-0N00H030F 30H MTGEZW-00-0000-0B00H030H MTGEZW-00-0000-0N00H030H 35F MTGEZW-00-0000-0B00H035F MTGEZW-00-0000-0N00H035F 35H MTGEZW-00-0000-0B00H035H MTGEZW-00-0000-0N00H035H 40F MTGEZW-00-0000-0B00H040F MTGEZW-00-0000-0N00H040F 40H MTGEZW-00-0000-0B00H040H MTGEZW-00-0000-0N00H040H 50F MTGEZW-00-0000-0B00H050F MTGEZW-00-0000-0N00H050F 50H MTGEZW-00-0000-0B00H050H MTGEZW-00-0000-0N00H050H 40F MTGEZW-00-0000-0B00J040F MTGEZW-00-0000-0N00J040F 40H MTGEZW-00-0000-0B00J040H MTGEZW-00-0000-0N00J040H 50F MTGEZW-00-0000-0B00J050F MTGEZW-00-0000-0N00J050F 50H MTGEZW-00-0000-0B00J050H MTGEZW-00-0000-0N00J050H 50F MTGEZW-00-0000-0B00K050F MTGEZW-00-0000-0N00K050F 50H MTGEZW-00-0000-0B00K050H MTGEZW-00-0000-0N00K040H (R) (R) (R) Copyright (c) 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc. 12 xlamp MT-G EasyWhite LEDs Reflow Soldering Characteristics In testing, Cree has found XLamp MT-G EasyWhite LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Based Solder Lead-Free Solder 3C/second max. 3C/second max. Preheat: Temperature Min (Tsmin) 100C 150C Preheat: Temperature Max (Tsmax) 150C 200C 60-120 seconds 60-180 seconds 183C 217C 60-150 seconds 60-150 seconds 215C 260C 10-30 seconds 20-40 seconds 6C/second max. 6C/second max. 6 minutes max. 8 minutes max. Average Ramp-Up Rate (Tsmax to Tp) Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Time Within 5C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25C to Peak Temperature Note: All temperatures refer to the topside of the package, measured on the package body surface. (R) (R) (R) Copyright (c) 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc. 13 xlamp MT-G EasyWhite LEDs Notes Lumen Maintenance Projections Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document at www.cree.com/xlamp_app_notes/LM80_results. Moisture Sensitivity In testing, Cree has found XLamp MT-G EasyWhite LEDs to have unlimited floor life in conditions 30C/85% relative humidity (RH). Moisture testing included a 168-hour soak at 85C/85% RH followed by 3 reflow cycles, with visual and electrical inspections at each stage. Cree recommends keeping XLamp LEDs in their sealed moisture-barrier packaging until immediately prior to use. Cree also recommends returning any unused LEDs to the resealable moisture-barrier bag and closing the bag immediately after use. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of www.cree.com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notices of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. Historical REACh banned substance information (substances restricted or banned in the EU prior to 2010) is also available upon request. UL Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory Claim WARNING. Do not look at exposed LED lamps in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the Cree LED Eye Safety Application Note (www.cree.com/xlamp_app_notes/led_eye_safety). (R) (R) (R) Copyright (c) 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc. 14 6 5 5 4 4 NOTICE CE FIDENTIAL. THIS PLOT AND THE INFORMATION S AND THE D PLOT WITHIN ARE THEINFORMATION PROPRIETARY AND HE PROPRIETARY AND TIAL INFORMATION OF CREE, INC. THIS PLOT ION OF CREE, INC. THIS PLOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY RIZED PERSON WITHOUTTHETO WRITTEN CONSENT RODUCED OR DISCLOSED ANY NC. WITHOUTTHE WRITTEN CONSENT 3 3 2 B DESCRIPTION DESCRIPTION A BY BY INITIAL RELEASE INITIAL RELEASE CHANGED SOLDER PAD VIEW CHANGED SOLDER PAD VIEW ADDED STENCIL VIEW ADDED STENCIL VIEW B 1 1 REVISONS REVISONS REV REV A 2 DATE DATE APP'D APP'D DC 10/8/10 10/8/10 DC 1/11/11 DC 1/11/11 DC 2/18/11 DC 2/18/11 DC 3/25/11 DC xlamp MT-G EasyWhite LEDs C C D CHANGED OVERALL DIM TO MATCH CUT LENGTH AND WIDTH D Mechanical Dimensions 6 5 4 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. MT-G 6V 4.85 .25 4.85 .25 8.90 .650 6D 3 All measurements are .25 mm unless otherwise indicated. 8.90 9.113 5 .650 4 INITIAL RELEASE 8.908.90 4.85 .25 9.113 8.90 .650 R4.100 R4.100 MT-G 36V .950 4.85 .25 .650 .500 .500 8.900 8.839 8.839 .500 C .500 8.90 .889 .889 1.090 1.090 8.900 .889 .889 1.722 1.722 3.175 3.175 6.000 R4.100 .937 DRAWN BY DRAWN BY DATE 8.900 .500 B SOLDER ED PC BOARD PAD ECOMMENDED PC BOARD SOLDER PAD .889 .889 SCALE 1.6 SURFACE FINISH: SURFACE FINISH: 1.6 4 5 8.900 4600 Silicon 4600 Drive Silicon Drive Durham, N.C 27703 Durham, N.C 27703 Phone (919) Phone313-5300 (919) 313-5300 Fax (919) Fax313-5558 (919) 313-5558 TITLE TIGER 91919191 OUTLINE TIGER OUTLINE 1.090 1.090 6.000 5 6 DATE 8.839 .500 3 4 2 3 2 .937 2610-00011 2610-00011 SHEET SHEETOF SCALE 9.000 9.000 1 REV. REV. C D OF 1 /1 1 /1 1 3.175 .889 1.090 6.000 DRAWING NO. DRAWING NO. SIZE C C 8.839 .889 .500 A .500 UNLESS OTHERWISE SPECIFIED UNLESS OTHERWISE SPECIFIED 10/8/10 10/8/10 D. CRONIN DIMENSIONS ARE IN ARE IN D. CRONIN DIMENSIONS CHECK DATE CHECK DATE MILLIMETERS AND AFTER FINISH. MILLIMETERS AND AFTER FINISH. 1.072 1.072 TOLERANCE UNLESS SPECIFIED: TOLERANCE UNLESS SPECIFIED: .XX .XX .25 .25 APPROVEDAPPROVEDDATE DATE 1.905 1.905 TITLE .XXX .XXX .125 .125 X X.5 .5 1.905 1.905 THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION MATERIAL MATERIAL FOR SHEETFOR METAL PARTS ONLY SHEET METAL PARTS ONLY .X .X1.5 1.5 SIZE .XX .XX .75 .75 RECOMMENDED STENCILSTENCIL PATTERN RECOMMENDED PATTERN .XXX .XXX .25 .25 FINAL PROTECTIVE FINAL FINISH PROTECTIVE FINISH X .5 X .5 .950 A 8.90 R4.100 .937 B 3.175 3.175 6.198 B .937 9.113 8.072 8.072 8.900 6.198 6.0006.000 1.090 1.090 .937 ANODE .950 C DESCRIPTION A 8.90 6.000 C REVISONS 8.90 6.000 2 REV ANODE 8.900 8.90 .950 .950 3 NOTICE IDENTIAL. THIS PLOT AND THE INFORMATION WITHIN ARE THE PROPRIETARY AND AL INFORMATION OF CREE, INC. THIS PLOT E COPIED, REPRODUCED OR DISCLOSED TO ANY ZED PERSON WITHOUTTHE WRITTEN CONSENT C. 9.113 D 8.900 8.072 1.090 6.198 1.722 .937 3.175 3.175 .937 8.900 A 8.072 6.198 1.722 1.072 .950 .950 1.905 3.175 1.905 .937 RECOMMENDED PC BOARD SOLDER PAD UNLESS OTHERWISE SPECIFIED RECOMMENDED STENCIL PATTERN 1.072 .950 1.905 6 5 4 1.905 COMMENDED PC BOARD SOLDER PAD THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION RECOMMENDED STENCIL PATTERN DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .25 .XXX .125 X .5 FOR SHEET METAL PARTS ONLY .X 1.5 .XX .75 .XXX .25 X .5 D. CRONIN 10/8/10 CHECK DATE APPROVED DATE 5 4 3 FOR SHEET M .X .XX .XXX X SURFACE FIN 3TITLE 36V MT-G MATERIAL SIZE FINAL PROTECTIVE FINISH C SCALE Copyright (c) 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks SURFACE FINISH: 1.6 9.000 registered trademarks of Cree, Inc. of Cree, Inc. (R) 6 DATE DRAWN BY UNLESS OTHE DIMENSIO MILLIMETERS A TOLERANCE U .XX .XXX X (R) (R) 2 15 DRAWING NO. 261 xlamp MT-G EasyWhite LEDs 6 5 4 3 2 1 REVISONS NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. REV Tape and Reel DESCRIPTION BY DATE A Initial Release DC 1/28/11 APP'D B Added missing sprocket holes DDS 10/17/11 All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. D D All dimensions in mm. 1.5 .1 User Feed Direction 4.10 12.1 END 1.75 .10 START CATHODE SIDE 5.25 16 +.3 -.0 C 9.4 C ANODE SIDE 6 Trailer NOTICE 160mm (min) of CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION empty pockets CONTANED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION sealed OF CREE, INC. THIS PLOT with tape MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY (15 pockets min.) CONSENT UNAUTHORIZED PERSON WITHOUT THE WRITTEN 5 4 3 Loaded Pockets (500 Lamps) 2 1 2400-00009 Leader 400mm (min) of empty pockets sealed with tape (35 pockets min.) OF CREE INC. INDEX QTY ITEM COMMENTS 1 2 1 2 2400-00009-CORE 2400-00009-REEL D D B B 12.4 +.2 .0 MEASURED AT HUB C C UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .25 .XXX .125 X .5 16.4 THIRD ANGLE PROJECTION FOR SHEET METAL PARTS ONLY +0.2 .X 1.5 .0 .XX .75 .25 MEASURED.XXX ATHUB X .5 A 330 +.25 -.75 DATE DRAWN BY D. CRONIN DATE -- 5 4 Phone (919) 313-5300 -- APPROVED Fax (919) 313-5558 -- TITLE MTG LOADING SPEC MATERIAL 1.9.4 -- SIZE FINAL PROTECTIVE FINISH -- 3 A DATE -- SURFACE FINISH: 1.6 6 4600 Silicon Drive Durham, N.C 27703 1/28/11 CHECK REV. DRAWING NO. C SCALE 2402-00016 SHEET 3.000 2 B OF 1 /1 21 .4 1 13.1 .2 B B 12.4 +1.0 -.5 MEASURED AT EDGE 60 60 REVISONS REV A THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .01 .XXX .005 X .5 FOR SHEET METAL PARTS ONLY .X .06 .XX .03 .XXX .010 X .5 SURFACE FINISH: 6 5 4 3 63 BY DESCRIPTION DATE D. CRONIN 4600 Silicon Drive Durham, N.C 27703 09/29/09 CHECK DATE -- Phone (919) 313-5300 -- Fax (919) 313-5558 A DATE APPROVED -- -- MATERIAL ANTI-STATIC HIPS TITLE REEL, 13" X 12MM, 3 PIECE SNAP SIZE FINAL PROTECTIVE FINISH 2 SCALE C 0.500 (R) REV. DRAWING NO. 2400-00009 SHEET 1 Copyright (c) 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc. (R) APP'D DATE DRAWN BY (R) 16 A OF 1 /1 xlamp MT-G EasyWhite LEDs Humidity Indicator Card (inside bag) Packaging Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Qty, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Qty, Reel ID, PO # Label with Cree Bin Code, Qty, Reel ID Label with Custom Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Qty, Reel ID, PO # Patent Label Label with Cree Bin Code, Qty, Reel ID Patent Label (R) (R) (R) Copyright (c) 2010 2011-2014 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc. 17