HITANO ENTERPRISE CORP. RECTIFIER SPECIALSTS TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER CURRENT -5.0 Amperes VOLTAGE RANGE - 20 to 60 Volts FEATURES *Metal to silicon rectifier majority carrier conduction *Low power loss, High efficiency *High current capability TO-252(DPAK) *Low forward voltage drop *High surge capacity *For use in low voltage high frequency inverters, free wheeling, and polarity protection applications MECHANICAL DATA *Case: Molded Plastic *Epoxy: UL 94V-0 rate flame retardant *Terminals : Solder plated, solderable per MIL-STD-750, Method 2026 *Mounting position: Any *Weight: 0.4 grams Approx. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz , resistive or inductive load. For capacitive load , derate current by 20%. SYMB OL SD520S Dimensions in inches and (millimeters) SD530S SD540S SD550S SD560S SD510 0S SD51 00S Maximum Recurrent Peak VRRM 20 30 40 50 60 80 100 Reverse Voltage Maximum RMS Voltage VRRS 14 21 28 35 42 56 70 Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 100 Maximum Average Forward Io 5.0 Rectified Current Peak Forward Surge Current 8.3 ms single half sine-wave IFSM 100 superimposed on rated load (JEDEC Method) Maximum instantaneous VF 0.55 0.75 0.85 Forward Voltage at 2.0A DC Maximum DC @TA 2.0 Reverse Current =25 IR at Rated DC @TA 50 Blocking Voltage =100 Typical Thermal Resistance RJA 80 (Note1) Typical Junction Capacitance CJ 550 (Note2) Storage and Operating TJ ,TS ~50to+125 Temperature Range TG NOTE: 1.Mounted on PC Board with 14mm2 (0.013mm thick)copper pad areas.2.Measured at 1 MHz applied reverse voltage of 4.0 volts. UNITS Volts Volts Volts Amps Amps mAmps /w pF RATING AND CHARACTERISTIC CURVES (1N5817 THRU 1N5819)