SD550S - Hitano Enterprise Corp.

HITANO ENTERPRISE CORP.

RECTIFIER SPECIALSTS

TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

VOLTAGE RANGE - 20 to 60 Volts CURRENT -5.0 Amperes

FEATURES

*Metal to silicon rectifier majority carrier conduction

*Low power loss, High efficiency

*High current capability

*Low forward voltage drop

*High surge capacity

*For use in low voltage high frequency inverters, free wheeling, and

polarity protection applications

MEC HANICAL DATA

*Case: Molded Plastic

*Epoxy: UL 94V-0 rate flame retardant

*Terminals : Solder plated, solderable per

MIL-STD-750, Method 2026

*Mounting position: Any

*Weight: 0.4 grams Approx.

MAXIMUM RATINGS AND ELECTRICAL

CHARACTERISTICS

Ratings at 25℃ ambient temperature unless otherwise

specified.

Single phase, half wave, 60 Hz , resistive or inductive load.

For capacitive load , derate current by 20%.

TO-252(DPAK)

Dimensions in inches and (millimeters)

SYMB

OL SD520S SD530S SD540S SD550S SD560S SD510

SD51

00S UNITS

Maximum Recurrent Peak

Reverse Voltage VRRM 20 30 40 50 60 80 100 Volts

Maximum RMS Voltage VRRS 14 21 28 35 42 56 70 Volts

Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 100 Volts

Maximum Average Forward

Rectified Current Io 5.0 Amps

Peak Forward Surge Current

8.3 ms single half sine-wave

superimposed on rated load

(JEDEC Method)

IFSM 100 Amps

Maximum instantaneous

Forward Voltage at 2.0A DC VF 0.55 0.75 0.85

@TA

=25℃ 2.0

Maximum DC

Reverse Current

at Rated DC

Blocking Voltage @TA

=100℃

mAmps

Typical Thermal Resistance

(Note1) RΘJA 80

℃/w

Typical Junction Capacitance

(Note2) CJ 550 pF

Storage and Operating

Temperature Range

TJ ,TS

TG ~50to+125 ℃

NOTE: 1.Mounted on PC Board with 14mm2 (0.013mm thick)copper pad areas.2.Measured at 1 MHz applied reverse voltage of 4.0 volts.