SG PARAMETER SYMBOL TEMP. POWER 1 1 1 1 1 1 1 Quiescent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input Bias Current, -IN Input Offset Current IQ VOS VOS VOS +IB -IB IOS 25C 25C 25C 25C 25C 25C 25C 28V 28V 10V 30V 28V 28V 28V 3 3 3 3 3 3 3 Quiescent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input BiasCurrent, -IN Input Offset Current IQ VOS VOS VOS +IB -IB IOS -55C -55C -55C -55C -55C -55C -55C 2 2 2 2 2 2 2 Quiescent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input Bias Current, -IN Input Offset Current IQ VOS VOS VOS +IB -IB IOS 4 4 4 4 4 4 4 4 Output Voltage, IO = 5A Output Voltage, IO = 50mA Output Voltage, IO = 2A Current Limits Stability/Noise Slew Rate Open Loop Gain Common Mode Rejection 6 6 6 6 6 6 6 5 5 5 5 5 5 5 TEST CONDITIONS MIN MAX UNITS VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 5 10 17.2 10.8 40 40 25 mA mV mV mV nA nA nA 28V 28V 10V 30V 28V 28V 28V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 5 15.2 22.4 16 72 72 60 mA mV mV mV nA nA nA 125C 125C 125C 125C 125C 125C 125C 28V 28V 10V 30V 28V 28V 28V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 7 16.5 23.7 17.3 80 80 80 mA mV mV mV nA nA nA VO VO VO ICL EN SR AOL CMR 25C 25C 25C 25C 25C 25C 25C 25C 18.3V 30V 30V 18V 28V 28V 28V 15V RL = 2.07 RL = 500 RL = 12 RL = 12, RCL = 1 RL = 500, AV = 1, CL = 10nF RL = 500 RL = 500, F = 10Hz RL = 500, F = DC, VCM = 9V 10.3 25 24 .54 Output Voltage, IO = 5A Output Voltage, IO = 50mA Output Voltage, IO = 2A Stability/Noise Slew Rate Open Loop Gain Common Mode Rejection VO VO VO EN SR AOL CMR -55C -55C -55C -55C -55C -55C -55C 18.3V 30V 30V 30V 28V 28V 15V RL = 2.07 RL = 500 RL = 12 RL = 500, AV = 1, CL = 10nF RL = 500 RL = 500, F = 10Hz RL = 500, F = DC, VCM = 9V 10.3 25 24 Output Voltage, IO = 3A Output Voltage, IO = 50mA Output Voltage, IO = 2A Stability/Noise Slew Rate Open Loop Gain Common Mode Rejection VO VO VO EN SR AOL CMR 125C 125C 125C 125C 125C 125C 125C 11.3V 30V 30V 28V 28V 28V 15V RL = 2.07 RL = 500 RL = 12 RL = 500, AV= 1, CL = 10nF RL = 500 RL = 500, F = 10Hz RL = 500, F = DC, VCM = 9V 6.3 25 24 1 91 70 1 91 70 1 91 70 .86 1 10 1 10 1 10 V V V A mV V/s dB dB V V V mV V/s dB dB V V V mV V/s dB dB BURN IN CIRCUIT These components are used to stabilize device due to poor high frequency characteristics of burn in board. ** Input signals are calculated to result in internal power dissipation of approximately 2.1W at case temperature = 125C. * This data sheet has been carefully checked and is believed to be reliable, however, no responsibility is assumed for possible or omissions. All specifications subject to change without notice. APEX MICROTECHNOLOGY CORPORATION * TELEPHONE (520) 690-8600 * FAX (520) 888-3329 * inaccuracies ORDERS (520) 690-8601 * EMAIL are prodlit@apexmicrotech.com PA73MU REV H DECEMBER 2005 (c) 2005 Apex Microtechnology Corp. 1