Film Capacitors
Power Electronic Capacitors
Series/Type: MKP DC
Ordering code: B2562*
Date: May 2018
Version: 12
EPCOS AG 2018. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Content of head er bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then
change the color to "white". This ensures that the table disappears (invisible) for the customer PDF.
Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it!
Identification/Classification 1
(header 1 + top left bar): Film Capacitors
Identification/Classification 2
(header 2 + bottom left header bar): Power Electronic Capacitors
Ordering code: (top right header bar) B2562*
Series/Type: (bottom right header bar) MKP DC
Preliminary data (optional):
Department: CAP FILM PW
Date: May 2018
Version: 12
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 2 of 27
Important notes at the end of this document.
Construction
1. Construction and general data
Test data
Voltage between terminals VTT 1.5 VRDC, 10 s
Voltage between terminals and case UTC 4000 V AC,10 s
Life test According to IEC 61071
C
ooling Naturally air-cooled (or forced air cooling)
D
egree of protection Indoor mounting
Reference standards
IEC 61071
RoHS compliance
Certification: UL 810-5th edition (refer to table 1.3)
Characteristics
Standard capacitance tolerance K: ±10%
Dielectric dissipation factor (tan δo) 2 • 10-4
Loss factor (tan δ) at 100 Hz
≤ 1.2 • 10-
3
for CR < 450 µF
≤ 1.5 • 10-3 for 450 µF ≤ CR ≤ 800 µF
≤ 2.0 • 10-3 for CR > 800 µF
Service life expectancy
(refer to section 3)
100 000 h at hs +75 °C und VRDC
up to 200 000 h (Considering de-ratings in voltage
and/or temperature (upon request))
Fit rate 50 at VRDC and +70 °C (refer to section 4)
Minimum temperature min. –55 °C
Maximum temperature max. +85 °C for diameter 85 mm
+75 °C for diameter 116 mm
Storage temperature st
g
–55 ... +85 °C
Maximum hotspot temperature hs
(refer to section 1)
+85 °C for diameter 85 mm
+75 °C for diameter 116 mm
Climatic category 55/85/56 for 85 mm diameter
55/75/56 for 116 mm diameter
Maximum altitude 2000 m above sea level
(derating curves available upon request)
Frequency range 100 Hz to10 kHz
(High frequency designs available upon request)
Design data
Resin filling Non PCB, hard polyurethane (dry type)
Mounting and grounding M12 threaded bolt on bottom of the aluminum case
Max. torque (case) M12 stud 10 Nm
Max. torque terminal Female M6: 5 Nm
Female M8: 6 Nm
Male M8: 8 Nm
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 3 of 27
Important notes at the end of this document.
1.1 Structure of ordering code
1.2 Standard types
D (mm)
OC ending
Diameter (Ø)
Terminal type
32 ± 0.5
-**1
50 ± 0.5
-**3
85 mm Female M6
(B25620) standard
116 mm Female M6
(B25620) standard
Other terminal configurations upon request.
1.3 UL approved types
Diameter (Ø) Series
85 mm B2562xC
116 mm Hc = 70 to 290 mm approved
Hc = 290 to 345 mm under approval
Terminal type:
0 = Female M6
1 = Male M6
2 = Female M8
3 = Male M8
4 = Female M10
5 = Male M10
9 = special
B2562 0 B 1 427 K 10 1
MKP DC Series
Version:
B = without plastic cap
C = with plastic cap
S = special
Rated volta
g
e: 110 • 10 = 1100 V
Rated capacitance:
107 = 10 · 107 pF = 100 µF
427 = 42 · 107 pF = 420 µF
108 = 10 · 108 pF = 1 mF
Distance between terminals:
1 = 32 mm
2 = 35 mm
3 = 50 mm
4 = 45 mm
9 = special
Capacitance tolerance
J = ± 5%
K = ± 10%
A = special
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 4 of 27
Important notes at the end of this document.
1.4 Drawings
Figure 1: - B25620B - Ø 85mm Figure 2: - B25620C - Ø 85mm
- Female terminals (M6) - Female terminals (M6)
- Between terminals 32 ±0.5mm - Between terminals 32 ±0.5mm
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 5 of 27
Important notes at the end of this document.
Figure 3: - B25620B - Ø 116mm Figure 4: - B25620C - Ø 116mm
- Female terminals (M6) - Female terminals (M6)
- Between terminals 50 ±0.5mm - Between terminals 50 ±0.5mm
M12 stud on bottom of the aluminum case, nut and washer for fixing are standard for all types.
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 6 of 27
Important notes at the end of this document.
Terms and characteristics
The following definitions apply to power capacitors according to IEC 61071.
Rated capacitance CR
Nominal value of the capacitance at +20 °C and measuring frequency range of 50 to 120 Hz.
Rated DC voltage VRDC
Maximum operating peak voltage of either polarity but of a non-reversing type wave form, for which the
capacitor has been designed, for continuous operation.
Ripple voltage Vr
Peak-to-peak alternating component of the unidirectional voltage.
This value must not exceed 0.28 • VRDC
Maximum surge voltage Vs
Peak voltage induced by a switching or any other disturbance of the system which is allowed for a limited
number of times and short period.
Insulation voltage Vi
RMS rated value of the insulation voltage of capacitive elements and terminals to case or earth. When it is not
specified in the product data sheet, the insulation voltage is at least:
Vi = 2
R
U
Maximum rate of voltage rise (du/dt)max
Maximum permissible repetitive rate of voltage rise of the operational voltage.
Maximum current Imax
Maximum RMS current for continuous operation for the given frequency range and for the maximum ripple
voltage. Please provide Frequency Spectrum of RMS current to your sales contact.
Maximum peak current Î
Maximum permissible repetitive current amplitude during continuous operation.
Maximum peak current (Î) and maximum rate of voltage rise (du/dt)max on a capacitor are related as follows:
Î = C · (dv/dt)max
Maximum surge current Î s
Admissible peak current induced by a switching or any other disturbance of the system which is allowed for a
limited number of times and short period.
Îs = C · (dv/dt)s
Ambient temperature A
Temperature of the surrounding air, measured at 10 cm distance and 2/3 of the case height of the capacitor.
Lowest operating temperature min
Lowest permitted ambient temperature at which a capacitor may be energized.
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 7 of 27
Important notes at the end of this document.
Maximum operating temperature max
Highest permitted capacitor temperature during operation, i.e. temperature at the hottest point of the case.
Hot-spot temperature hs
Temperature zone inside of the capacitor at hottest spot.
hs =Tamb+ IRMS2*ESR*Rth
Tangent of the loss angle of a cap acitor tan
Ratio between the equivalent series resistance and the capacitive reactance of a capacitor at a specified
sinusoidal alternating voltage, frequency and temperature.
Series resistance Rs
The sum of all ohmic resistances occurring inside the capacitor.
ESR
ESR (Equivalent Series Resistance) representing entire active power in capacitor.
ESR = C
tan = C
Rs
0
tan
Thermal resistance Rth
The thermal resistance indicates by how many degrees the capacitor temperature at the hot spot rises in
relation to the dissipation losses.
Maximum power loss Pmax
Maximum permissible power dissipation for the capacitor’s operation.
Pmax =
th
Ahs
R
Self inductance Lself
The sum of all inductive elements which are contained in a capacitor.
Resonance frequency fr
The lowest frequency at which the impedance of the capacitor becomes minimum.
fr =
Rself CL2
1
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 8 of 27
Important notes at the end of this document.
VRDC = 700 V DC / VTT = 1050 V DC, 10s / VTC = 4000 V AC, 10s
CR IMAX 1 Is Î ESR2 Lself RTH D HC HT Weight Fig. Ordering code
µF A kA kA mΩ nH K/W mm mm mm kg
280 55 9.1 3.0 1.4 ≤ 40 4 85 70 76 0.45 1 B25620B0287K701
470 55 8.6 2.9 1.6 ≤ 40 3.3 85 95 101 0.58 1 B25620B0477K701
560 80 18.2 6.0 1.0 ≤ 40 2.9 116 70 76 0.88 3 B25620B0567K703
620 55 9.1 3.0 2.0 ≤ 40 2.9 85 120 126 0.71 1 B25620B0627K701
700 55 9.1 3.0 2.2 ≤ 40 2.8 85 132 138 0.87 1 B25620B0707K701
700 55 9.1 3.0 2.2 ≤ 40 2.8 85 132 138 0.87 2 B25620C0707K701
750 70 16.9 5.6 1.4 ≤ 40 2.4 85 155 161 1 1 B25620B0757K701
900 80 18.2 6.0 1.0 ≤ 40 2.3 116 95 101 1.13 3 B25620B0907K703
950 70 17.6 5.9 1.5 ≤60 2.1 85 173 179 1.1 1 B25620B0957K701
1240 80 18.2 6.1 1.3 ≤ 40 2.2 116 120 126 1.4 3 B25620B0128K743
1300 70 17.7 5.9 1.5 ≤60 1.9 85 223 229 1.4 1 B25620B0138K701
1400 80 18.1 6.0 1.5 ≤ 40 2.1 116 132 138 1.55 3 B25620B0148K703
1500 80 33.8 11.3 0.9 ≤40 2.1 116 155 161 1.75 3 B25620B0158K703
1900 80 34.7 11.6 1.0 ≤60 2 116 173 179 1.95 3 B25620B0198K703
2600 80 35.5 11.9 1.1 ≤60 1.8 116 223 229 2.56 3 B25620B0268K703
3000 80 35.8 11.9 1.2 ≤90 1.8 116 248 254 2.85 3 B25620B0308K703
4000 100 40.0 13.3 1.1 ≤100 1.4 116 345 351 4.14 3 B25620B0408K703
4000 100 40.0 13.3 1.1 ≤100 1.4 116 345 351 4.18 4 B25620C0408K703
1 Please refer to current derating section for more details
2 ESR at 1 kHz (typical value)
Other configurations and capacitance tolerances upon request
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 9 of 27
Important notes at the end of this document.
VRDC = 900 V DC / VTT = 1350V DC, 10s / VTC = 4000 V AC, 10s
CR IMAX 1 Is Î ESR2 Lself RTH D HC HT Weight Fig. Ordering code
µF A kA kA mΩ nH K/W mm mm mm kg
220 50 8.1 2.7 1.5 ≤ 40 4 85 70 76 0.45 1 B25620B0227K881
220 50 8.1 2.7 1.5 ≤ 40 4 85 74 76 0.48 2 B25620C0227K881
350 50 8.0 2.7 1.7 ≤ 40 3.3 85 95 101 0.58 1 B25620B0357K881
350 50 8.0 2.7 1.7 ≤ 40 3.3 85 99 101 0.61 2 B25620C0357K881
440 65 16.3 5.4 1.1 ≤ 40 2.9 116 70 76 0.88 3 B25620B0447K883
480 55 8.1 2.7 2.1 ≤ 40 2.9 85 120 126 0.71 1 B25620B0487K881
480 55 8.1 2.7 2.1 ≤ 40 2.9 85 124 126 0.74 2 B25620C0487K881
550 50 8.3 2.8 2.3 ≤ 40 2.8 85 132 138 0.87 1 B25620B0557K881
550 50 8.3 2.8 2.3 ≤ 40 2.8 85 136 138 0.9 2 B25620C0557K881
600 70 15.5 5.1 1.5 ≤ 40 2.4 85 155 161 1 1 B25620B0607K881
700 70 16.1 5.3 1.2 ≤ 40 2.3 116 95 101 1.13 3 B25620B0707K883
750 75 17.3 5.8 1.6 ≤ 60 2.1 85 173 179 1.1 1 B25620B0757K881
750 75 17.3 5.8 1.6 ≤ 60 2.1 85 177 179 1.13 2 B25620C0757K881
900 75 14.0 4.7 1.6 ≤ 60 1.9 85 223 229 1.4 1 B25620B0907K881
970 75 16.3 5.4 1.4 ≤ 40 2.2 116 120 126 1.4 3 B25620B0977K883
1000 80 13.7 4.6 1.7 ≤90 1.9 85 248 254 1.6 1 B25620B0108K881
1100 80 16.3 5.4 1.5 ≤ 40 2.1 116 132 138 1.55 3 B25620B0118K883
1200 80 31.0 10.3 1.0 ≤40 2.1 116 155 161 1.75 3 B25620B0128K883
1500 80 33.1 11.0 1.1 ≤ 60 2 116 173 179 1.95 3 B25620B0158K883
1500 80 33.1 11.0 1.1 ≤ 60 2 116 177 179 1.99 4 B25620C0158K883
2000 80 33.3 11.0 1.2 ≤60 1.8 116 223 229 2.56 3 B25620B0208K883
2300 80 33.3 11.0 1.3 ≤90 1.8 116 248 254 2.85 3 B25620B0238K883
3000 100 38.5 12.8 1.2 ≤100 1.4 116 345 351 4.14 3 B25620B0308K883
1 Please refer to current derating section for more details
2 ESR at 1 kHz (typical value)
Other configurations and capacitance tolerances upon request
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 10 of 27
Important notes at the end of this document.
VRDC = 1100 V DC / VTT = 1650 V DC, 10s / VTC = 4000 V AC, 10s
CR IMAX 1 Is Î ESR2 Lself RTH D HC HT Weight Fig. Ordering code
µF A kA kA mΩ nH K/W mm mm mm kg
140 50 7.7 2.6 1.8 ≤ 40 4 85 70 76 0.45 1 B25620B1147K101
140 50 7.7 2.6 1.8 ≤ 40 4 85 74 76 0.48 2 B25620C1147K101
230 50 7.2 2.3 1.9 ≤ 40 3.3 85 95 101 0.58 1 B25620B1237K101
280 75 15.5 5.1 1.2 ≤ 40 2.9 116 70 76 0.88 3 B25620B1287K103
310 50 7.7 2.6 2.3 ≤ 40 2.9 85 120 126 0.71 1 B25620B1317K101
310 50 7.7 2.6 2.3 ≤ 40 2.9 85 124 126 0.74 2 B25620C1317K101
420 63 8.8 2.9 2.4 ≤ 40 2.8 85 135 141 0.87 1 B25620B1427A101*
420 63 8.8 2.9 2.4 ≤ 40 2.8 85 139 141 0.9 2 B25620C1427A101*
420 75 17.3 5.8 1.7 ≤ 40 2.4 85 155 161 1 1 B25620B1427K101
420 75 17.3 5.8 1.7 ≤ 40 2.4 85 159 161 1.03 2 B25620C1427K101
450 75 14.9 4.9 1.3 ≤ 40 2.3 116 95 101 1.13 3 B25620B1457K103
480 80 15.6 5.2 1.8 ≤ 60 2.1 85 173 179 1.1 1 B25620B1487K101
480 80 15.6 5.2 1.8 ≤ 60 2.1 85 177 179 1.13 2 B25620C1487K101
610 80 15.1 5.0 1.7 ≤ 40 2.2 116 120 126 1.4 3 B25620B1617K103
650 80 13.4 4.4 1.8 ≤90 1.9 85 248 254 1.6 1 B25620B1657K101
700 80 15.1 5.0 1.7 ≤ 40 2.1 116 132 138 1.55 3 B25620B1707K103
940 100 29.4 9.9 1.2 ≤ 60 2 116 173 179 1.95 3 B25620B1947K103
1100 100 27.7 9.3 1.3 ≤ 100 1.8 116 223 229 2.56 3 B25620B1118K103
1400 100 28.9 9.6 1.3 ≤90 1.8 116 248 254 2.85 3 B25620B1148K103
1500 100 29.3 9.7 1.5 ≤ 90 1.7 116 273 279 3.13 3 B25620B1158K103
1900 100 34.4 11.5 1.2 ≤100 1.4 116 345 351 4.14 3 B25620B1198K103
* Capacitance tolerance A: -15% to 0%
1 Please refer to current derating section for more details
2 ESR at 1 kHz (typical value)
Other configurations and capacitance tolerances upon request
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 11 of 27
Important notes at the end of this document.
VRDC = 1200 V DC / VTT = 1800 V DC, 10s / VTC = 4000 V AC, 10s
CR IMAX 1 Is Î ESR2 Lself RTH D HC HT Weight Fig. Ordering code
µF A kA kA mΩ nH K/W mm mm mm kg
120 50 7.1 2.4 1.9 ≤ 40 4 85 70 76 0.45 1 B25620B1127K201
180 50 7.1 2.4 2.1 ≤ 40 3.3 85 95 101 0.58 1 B25620B1187K201
250 50 7.1 2.4 2.4 ≤ 40 2.9 85 120 126 0.71 1 B25620B1257K201
280 50 7.1 2.4 2.5 ≤ 40 2.8 85 132 138 0.87 1 B25620B1287K201
300 65 14.0 4.7 1.8 ≤ 40 2.4 85 155 161 1 1 B25620B1307K201
350 65 13.6 4.5 1.9 ≤ 60 2.1 85 173 179 1.1 1 B25620B1357K201
360 70 15.2 5.1 1.6 ≤ 40 2.3 116 95 101 1.13 3 B25620B1367K203
500 75 15.3 5.1 1.7 ≤ 40 2.2 116 120 126 1.4 3 B25620B1507K203
520 70 14.9 4.9 1.6 ≤ 60 1.9 85 223 229 1.4 1 B25620B1527K201
570 75 15.4 5.1 1.7 ≤ 40 2.1 116 132 138 1.55 3 B25620B1577K203
600 70 15.1 5.0 1.7 ≤ 90 1.9 85 248 254 1.6 1 B25620B1607K201
620 80 29.3 9.7 1.3 ≤ 60 2.1 116 155 161 1.75 3 B25620B1627K203
730 100 30.8 10.2 1.3 ≤ 60 2 116 173 179 1.95 3 B25620B1737K203
1000 100 30.7 10.2 1.4 ≤ 90 1.8 116 223 229 2.56 3 B25620B1108K203
1200 100 29.7 9.9 1.4 ≤ 90 1.8 116 248 254 2.85 3 B25620B1128K203
1600 100 36.7 12.3 1.3 ≤ 100 1.4 116 345 351 4.14 3 B25620B1168K203
1 Please refer to current derating section for more details
2 ESR at 1 kHz (typical value)
Other configurations and capacitance tolerances upon request
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 12 of 27
Important notes at the end of this document.
VRDC = 1320 V DC / VTT = 1980 V DC, 10s / VTC = 4000 V AC, 10s
CR IMAX 1 Is Î ESR2 Lself RTH D HC HT Weight Fig. Ordering code
µF A kA kA mΩ nH K/W mm mm mm kg
100 45 6.6 2.2 2.2 ≤ 40 4 85 70 76 0.45 1 B25620B1107K321
160 48 6.8 2.3 2.3 ≤ 40 3.3 85 95 101 0.58 1 B25620B1167K321
220 45 7.4 2.5 2.6 ≤ 40 2.9 85 120 126 0.71 1 B25620B1227K321
220 45 7.4 2.5 2.6 ≤ 40 2.9 85 124 126 0.74 2 B25620C1227K321
260 45 7.6 2.6 2.7 ≤ 40 2.8 85 132 138 0.87 1 B25620B1267K321
260 45 7.6 2.6 2.7 ≤ 40 2.8 85 136 138 0.9 2 B25620C1267K321
310 65 14.3 4.8 1.7 ≤ 40 2.3 116 95 101 1.13 3 B25620B1317K323
340 70 14.8 5.0 2.1 ≤ 60 2.1 85 173 179 1.1 1 B25620B1347K321
340 70 14.8 5.0 2.1 ≤ 60 2.1 85 177 179 1.13 2 B25620C1347K321
400 70 12.4 4.1 2.2 ≤ 90 1.9 85 223 229 1.4 1 B25620B1407K321
420 65 14.1 4.7 1.8 ≤ 40 2.2 116 120 126 1.4 3 B25620B1427K323
480 70 14.1 4.7 1.8 ≤ 40 2.1 116 132 138 1.55 3 B25620B1487K323
500 70 13.8 4.6 2.3 ≤ 90 1.9 85 248 254 1.6 1 B25620B1507K321
520 80 26.9 8.9 1.4 ≤ 40 2.1 116 155 161 1.75 3 B25620B1527K323
660 100 27.8 9.3 1.4 ≤ 90 2 116 173 179 1.95 3 B25620B1667K323
880 100 27.4 9.1 1.6 ≤ 90 1.8 116 223 229 2.56 3 B25620B1887K323
940 100 26.9 8.9 1.6 ≤ 90 1.8 116 248 254 2.85 3 B25620B1947K323
1000 100 26.4 8.8 1.6 ≤ 90 1.7 116 273 279 3.13 3 B25620B1108K323
1300 100 36.3 12.1 1.4 ≤ 100 1.4 116 345 351 4.14 3 B25620B1138K323
1 Please refer to current derating section for more details
2 ESR at 1 kHz (typical value)
Other configurations and capacitance tolerances upon request
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 13 of 27
Important notes at the end of this document.
VRDC = 1500 V DC / VTT = 2250 V DC, 10s / VTC = 4000 V AC, 10s
CR IMAX 1 Is Î ESR2 Lself RTH D HC HT Weight Fig. Ordering Code
µF A kA kA mΩ nH K/W mm mm mm kg
90 40 6.4 2.1 2.4 ≤ 40 4 85 70 76 0.45 1 B25620B1906K501
140 40 6.4 2.1 2.6 ≤ 40 3.3 85 95 101 0.58 1 B25620B1147K501
190 40 6.4 2.1 2.8 ≤ 40 2.9 85 120 126 0.71 1 B25620B1197K501
220 40 6.6 2.2 2.7 ≤ 40 2.8 85 132 138 0.87 1 B25620B1227K501
230 50 12.9 4.3 2.3 ≤ 40 2.4 85 155 161 1 1 B25620B1237K501
270 50 12.4 4.1 1.8 ≤ 40 2.3 116 95 101 1.13 3 B25620B1277K503
280 50 12.9 4.3 2.3 ≤ 60 2.1 85 173 179 1.1 1 B25620B1287K501
370 50 12.5 4.2 2.3 ≤ 40 2.2 116 120 126 1.4 3 B25620B1377K503
380 70 12.8 4.3 2.5 ≤ 60 1.9 85 223 229 1.4 1 B25620B1387K501
420 50 12.5 4.2 2.3 ≤ 40 2.1 116 132 139 1.55 3 B25620B1427K503
440 70 13.1 4.4 2.6 ≤ 90 1.9 85 248 254 1.6 1 B25620B1447K501
450 60 25.2 8.4 1.7 ≤ 60 2.1 116 155 161 1.75 3 B25620B1457K503
550 60 25.2 8.4 1.6 ≤ 60 2 116 173 179 1.95 3 B25620B1557K503
740 80 25.0 8.3 1.8 ≤ 90 1.8 116 223 229 2.56 3 B25620B1747K503
840 80 25.1 8.4 1.8 ≤ 90 1.8 116 248 254 2.85 3 B25620B1847K503
1100 100 33.3 11.1 1.5 ≤ 100 1.4 116 345 351 4.14 3 B25620B1118K503
1 Please refer to current derating section for more details
2 ESR at 1 kHz (typical value)
Other configurations and capacitance tolerances upon request
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 14 of 27
Important notes at the end of this document.
VRDC = 2000 V DC / VTT = 3000 V DC, 10s / VTC = 4000 V AC, 10s
CR IMAX 1 Is Î ESR2 Lself RTH D HC HT Weight Fig. Ordering Code
µF A kA kA mΩ nH K/W mm mm mm kg
40 35 4.5 1.5 3.3 ≤ 60 4 85 70 76 0.45 1 B25620B1406K981
40 35 4.5 1.5 3.3 ≤ 60 4 85 74 76 0.48 2 B25620C1406K981
70 40 4.9 1.6 3.5 ≤ 60 3.3 85 95 101 0.58 1 B25620B1706K981
70 40 4.9 1.6 3.5 ≤ 60 3.3 85 99 101 0.61 2 B25620C1706K981
100 40 4.9 1.6 3.6 ≤ 60 2.9 85 120 126 0.71 1 B25620B1107K981
110 40 4.6 1.5 3.6 ≤ 60 2.8 85 132 138 0.87 1 B25620B1117K981
145 50 10.0 3.4 2.7 ≤ 60 2.1 85 173 179 1.1 1 B25620B1147K981
145 50 10.0 3.4 2.7 ≤ 60 2.1 85 177 179 1.13 2 B25620C1147K981
190 60 9.6 3.2 2.8 ≤ 60 2.2 116 120 126 1.4 3 B25620B1197K983
200 70 9.3 3.1 2.8 ≤ 90 1.9 85 223 229 1.4 1 B25620B1207K981
215 60 9.6 3.2 2.9 ≤ 40 2.1 116 132 138 1.55 3 B25620B1217K983
220 70 9.0 3.0 2.8 ≤ 90 1.9 85 248 254 1.6 1 B25620B1227K981
230 80 17.8 5.9 1.8 ≤ 40 2.1 116 155 161 1.75 3 B25620B1237K983
295 80 18.8 6.3 1.9 ≤ 60 2 116 173 179 1.95 3 B25620B1297K983
380 80 17.8 5.9 2.2 ≤ 90 1.8 116 223 229 2.56 3 B25620B1387K983
440 80 18.2 6.1 2.5 ≤ 90 1.8 116 248 254 2.85 3 B25620B1447K983
460 100 18.2 6.0 2.8 ≤ 90 1.7 116 263 269 3.0 3 B25620B1467K983
510 100 19.3 6.4 3 ≤ 90 1.7 116 273 279 3.13 3 B25620B1517K983
600 100 25.1 8.4 2.2 ≤ 100 1.4 116 345 351 4.14 3 B25620B1607K983
1 Please refer to current derating section for more details
2 ESR at 1 kHz (typical value)
Other configurations and capacitance tolerances upon request
Display of ordering codes for EPCOS products
The ordering code for one and the same EPCOS product can be represented differently in data
sheets, data books, other publications, on the EPCOS website, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the ordering
codes are due to different processes employed and do not affect the specifications of the respective
products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 15 of 27
Important notes at the end of this document.
2. Current derating
2.1 Current derating graphs for capacitors 700 VRDC
B25620B0287K701 B25620B0477K701
B25620B0567K703 B25620B0627K701
B25620B0707 K701/ B25620C0707K7 01 B25620B0757 K701
B25620B0907K703 B25620B0957K701
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 16 of 27
Important notes at the end of this document.
B25620B0128K743 B25620B0138K701
B25620B0148K703 B25620B0158K703
B25620B0198K703 B25620B0268K703
B25620B0308K703 B25620B0408K703/ B25620C0408K703
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 17 of 27
Important notes at the end of this document.
2.2 Current derating graphs for capacitors 900 VRDC
B25620B0227K8 81/ B25620C0227K881 B25620B0357K881/ B25620C0357 K881
B25620B0447K883 B25620B 0487K881/ B25620C0487 K881
B25620B0557K881/ B25620C0557K881 B25620B0607K881
B25620B0707K883 B25620B0757K8 81/ B25620C0757K881
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 18 of 27
Important notes at the end of this document.
B25620B0907K881 B25620B0977K883
B25620B0108K881 B25620B0118K883
B25620B0128K883 B25620B0158K8 83/ B25620C0158K883
B25620B0208K883 B25620B0238K883
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 19 of 27
Important notes at the end of this document.
B25620B0308K883
2.3 Current derating graphs for capacitors 1100 VRDC
B25620B1147K1 01/ B25620C1147K101 B25620B1237K101
B25620B1287K103 B25620B1317K101/ B25620C13 17K101
B25620B1427A1 01/ B25620C1427A101 B25620B1427K101/ B25620 C1427K101
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 20 of 27
Important notes at the end of this document.
B25620B1457K103 B25620B1487K1 01/ B25620C1487K101
B25620B1617K103 B25620B1657K101
B25620B1707K103 B25620B1947K103
B25620B1118K103 B25620B1148K103
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 21 of 27
Important notes at the end of this document.
B25620B1158K103 B25620B1198K103
2.4 Current derating graphs for capacitors 1200 VRDC
B25620B1127K201 B25620B1187K201
B25620B1257K201 B25620B1287K201
B25620B1307K201 B25620B1357K201
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 22 of 27
Important notes at the end of this document.
B25620B1367K203 B25620B1507K203
B25620B1527K201 B25620B1577K203
B25620B1607K201 B25620B1627K203
B25620B1737K203 B25620B1108K203
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 23 of 27
Important notes at the end of this document.
B25620B1128K203 B25620B1168K203
Current derating graphs are based on typical values. Graphs for capacitors rated 1320 / 1500/2000 UNDC are
available upon request.
3. Service life
Service life tLD at different hotspot temperature (hs) and voltage V
For capacitors with diameter 116 mm a maximum hot spot temperature of +85 °C is allowed during short term
operation (maximum 10% of the total load duration) without further reduction of the service life.
The expected lifetime is a calculated value based on real application data and life endurance test for this capacitor
series. The lifetime calculation correlates the time of test, voltage and temperature always comparing testing
conditions to real application data and its own ageing factors. In order to determine the ageing factor used for this
capacitor design it was performed life endurance tests with different stress is voltage and temperature. Failure criteria
is capacitance drop higher than 3%.
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 24 of 27
Important notes at the end of this document.
4. FIT
The FIT (Failure In Time) of a component is defined as the number of expected failures in 109 hours of operation.
The FIT rate is calculated on the basis of the number of components operating in the field and the estimated
hours of operation. All the reports of failures are taken into consideration for this calculation, which is updated
every year.
The other values in the graph are given as indication and calculated based on acceleration factors.
1
10
100
1000
10000
0,8 0,9 1 1,1 1,2
FIT
FIT Rate
60° C 65° C 70° C 75° C 80° C 85° C
U/ UNDC
hs
Film Capacitors B2562*
Power Electronic Capacitors MKP DC
CAP FILM PW May 2018
Please read Cautions and warnings and Page 25 of 27
Important notes at the end of this document.
Cautions and warnings
In case of dents of more than 1 mm depth or any other mechanical damage, capacitors must not be used at
all.
Check tightness of the connections/terminals periodically.
The energy stored in capacitors may be lethal. To prevent any chance of shock, discharge and short-circuit
the capacitor before handling.
Failure to follow cautions may result, worst case, in premature failures, bursting and fire.
EPCOS AG is not responsible for any kind of possible damages to persons or things due to improper
installation and application of capacitors for power electronics.
Safety
Electrical or mechanical misapplication of capacitors may be hazardous. Personal injury or property damage
may result from bursting of the capacitor or from expulsion of oil or melted material due to mechanical
disruption of the capacitor.
Ensure good, effective grounding for capacitor enclosures.
Observe appropriate safety precautions during operation (self-recharging phenomena and the high energy
contained in capacitors).
Handle capacitors carefully, because they may still be charged even after disconnection.
The terminals of capacitors, connected bus bars and cables as well as other devices may also be energized.
Follow good engineering practice.
Thermal load
After installation of the capacitor it is necessary to verify that maximum hot-spot temperature is not exceeded at
extreme service conditions.
Mechanical protection
The capacitor has to be installed in a way that mechanical damages and dents in the aluminum can are
avoided.
Storage and operating conditions
Do not use or store capacitors in corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali,
salt or the like are present. In dusty environments regular maintenance and cleaning especially of the terminals
is required to avoid conductive path between phases and/or phases and ground.
The maximum storage temperature is +85 °C.
Service life expectancy
Electrical components do not have an unlimited service life expectancy; this applies to self-healing capacitors,
too. The maximum service life expectancy may vary depending on the application the capacitor is used in.
Important notes
Page 26 of 27
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of the
customer application or other action taken by the customer (e.g. installation of protective circuitry
or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or
failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard.
The IATF certifications confirm our compliance with requirements regarding the quality
management system in the automotive industry. Referring to customer requirements and
customer specific requirements (“CSR”) TDK always has and will continue to have the policy of
respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of
unilateral requirements, we hereby like to emphasize that only requirements mutually agreed
upon can and will be implemented in our Quality Management System. For clarification
purposes we like to point out that obligations from IATF 16949 shall only become legally binding if
individually agreed upon.
Important notes
Page 27 of 27
8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS,
DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar,
SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
Release 2018-06
