MXP7205VW-B Prototyping Board MXP7205VW-B GENERAL DESCRIPTION The MXP7205VW-B provides a convenient and easy way to evaluate and prototype with the MXP7205VW dual axes accelerometer. The accelerometer and passive components are SMT mounted on the board. Each pin of the MXP7205VW SMT device is brought out to standard 0.10 inch on center connections on the sides of the prototyping board. Wires can either be soldered directly to the prototyping board or the DIP pins can be used with widely available breadboard kits. For complete performance specifications of the MXP7205VW refer to the MXP7205VW datasheet. PIN DESCRIPTION Pin P1-1 P1-2 P1-3 P1-4 P2-1 P2-2 P2-3 P2-4 Name VDD NC NC GND SSB SCK MOSI MISO Description Supply Voltage 4.5 to 5.25 V No Connect No Connect Ground Slave Select Bar (active low) Clock Input Master Out - Slave In Master In - Slave Out MXP7205VW-B PCB CONNECTION DIMENSIONS SCHEMATIC OF THE MXP7205VW-B MXP7205VW-B MXP7205VW-B Information furnished by MEMSIC is believed to be accurate and reliable. However, no responsibility is assumed by MEMSIC for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of MEMSIC. MEMSIC MXP7205VW-B Prototyping Board User's Guide MEMSIC, Inc. One Technology Drive, Suite 325, Andover, MA, 01810, USA Tel: +1 978 738 0900 Fax: +1 978 738 0196 www.memsic.com Page 1of 1 Rev A