MXP7205VW-B Prototyping Board
MXP7205VW-B
GENERAL DESCRIPTION
The MXP7205VW-B provides a convenient and easy way
to evaluate and prototype with the MXP7205VW dual axes
accelerometer. The accelerometer and passive components
are SMT mounted on the board. Each pin of the
MXP7205VW SMT device is brought out to standard 0.10
inch on center connections on the sides of the prototyping
board. Wires can either be soldered directly to the
prototyping board or the DIP pins can be used with widely
available breadboard kits.
For complete performance specifications of the
MXP7205VW refer to the MXP7205VW datasheet.
PIN DESCRIPTION
Pin
Name
Description
P1-1
VDD
Supply Voltage 4.5 to 5.25 V
P1-2
NC
No Connect
P1-3
NC
No Connect
P1-4
GND
Ground
P2-1
SSB
Slave Select Bar (active low)
P2-2
SCK
Clock Input
P2-3
MOSI
Master Out – Slave In
P2-4
MISO
Master In – Slave Out
SCHEMATIC OF THE MXP7205VW-B
MXP7205VW-B
MXP7205VW-B
PCB CONNECTION DIMENSIONS
MXP7205VW-B
Information furnished by MEMSIC is believed to be accurate and reliable.
However, no responsibility is assumed by MEMSIC for its use, nor for any
infringements of patents or other rights of third parties, which may result from
its use. No license is granted by implication or otherwise under any patent or
patent rights of MEMSIC.
MEMSIC,
Inc.
One Technology Drive, Suite 325, Andover, MA, 01810,
USA
Tel: +1 978 738 0900 Fax: +1 978 738
0196
www.memsic.com
MEMSIC MXP7205VW-B Prototyping Board User's Guide Page 1of 1 Rev A
