Model RFP-10-XXXRV-S RoHS Compliant Half Flange Resistors 10 Watts General Specifications Resistive Element Substrate Cover Mounting flange Leads Features: * See Chart * 10 Watts * BeO Ceramic * Non-Nichrome Resistive Element * Welded Silver Leads * 100% Tested Thick film Beryllium oxide ceramic Alumina ceramic Copper, nickel plated per QQ-N-290 99% pure silver (.005" thick) Electrical Specifications Resistance Range: Frequency Range; Power: Capacitance: See Chart, 5% See Chart 10 Watts .75 pF Tolerance is 0.010", unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. Operating temperature is -55C to 150C (see chart for derating temperatures). All dimensions in inches. Specifications subject to change with out notice. * RoHS Compliant Outline Drawing 10-XXXRV-S (097) Rev D Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model RFP-10-XXXRV-S RoHS Compliant Resistor Value Chart: Part Number 10-20RV-S 10-25RV-S 10-75RV-S 10-100RV-S 10-150RV-S 10-180RV-S 10-200RV-S Value 20 Ohms 25 Ohms 75 Ohms 100 Ohms 150 Ohms 180 Ohms 200 Ohms Frequency DC - 6.0 GHz DC - 2.0 GHz DC - TBD DC - 6.0 GHz DC - 3.0 GHz DC - 3.0 GHz DC - 2.0 GHz Tolerance 5% 5% 5% 5% 5% 5% 5% Power De-rating: Mounting Footprint and Procedure: .025 MIN. (2 PLACES) BOARD LOWER THAN LEAD. BOARD EVEN WITH LEAD. BOARD LOWER THAN LEAD. BOARD HIGHER THAN LEAD. SUGGESTED STRESS RELIEF METHODS NOT RECOMMENDED APPLICATION SCALE: NONE SCALE: NONE 10-XXXRV-S (097) Rev D USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.