|||||||||||||||
AP3S
• Performance comparable to fixed frequency oscillator
• Lowest peak-to-peak jitter
• Low supply current
• Short lead time
• Suitable for mass production
• Alternative to long lead-time XO's
Pb
RoHS
Compliant
3.2 x 2.5 x 1.1mm
SMD CMOS PROGRAMMABLE CRYSTAL OSCILLATOR
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
FEATURES:
ELECTRICAL SPECIFICATIONS:
For Small
Quantities,
Delivery Time
is 1-5 days
OPTIONS & PART IDENTIFICATION:
(Left blank if standard)
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 02.25.08
Visit www.abracon.com for Terms & Conditions of Sale
Unit
MHz
MHz
MHz
°C
ppm
V
V
V
mA
pF
V
V
V
V
V
V
%
uA
nSec
nSec
psec
* Inclusive of calibration @25°C, operating temperature range, input voltage variation, load variation, aging,
shock, and vibration.
Table 1: Input Current
3.3
V
2.5
V
1.8
V
10 8 6
15 10 8
20 15 12
22 15 -
25 - -
Table 2: Rise and Fall Time
3.3
V
2.5
V
1.8
V
6810
556
1MHz ≤ F< 10MHz
10MHz ≤ F
166MHz ≤ F < 200MHz
Frequency Rise / Fall Time (ns)
MHz
1MHz ≤ F< 30MHz
30MHz ≤ F< 75MHz
75MHz ≤ F< 133MHz
133MHz ≤ F < 166MHz
--
--
50
--
Symmetry
--
MHz
--
--
0.25
45
--
See Table 2
See Table 2
Frequency Input current (mA)
(1.8V) --
2.75
1.62
See Table 1
--
55
--
0.18
--
Output "1" level (3.3V)
(1.8V) 1.62
(2.5V) 2.25
2.97
0.33
(2.5V)
Jitter peak-to-peak** --
Fall Time (90%->10% Vdd)
Rise Time (10%->90% Vdd)
1.981.8
133
2.5
Input Current
Output "0" level (3.3V) 15
----
Output Load
Output Type CMOS
--
(2.5V) 661--
Characteristics mumixaMlacipyTmumin
iM
1
Frequency Range (3.3V) 002--1
60--
--
100--
3.63
1
3.379.2
-10
(1.8V)
Freq. stability
over operating temp.* (See Options) -100
2.25
Operating Temp. Range (See Options)
Input Voltage (Operating Vdd)
Standby Curren
t
--
** Jitter performance depends on programing parameter and output frequency. Please contact ABRACON for additional info.
--002 ot 04
pin 1 : High or Open , pin 3 : Enable
pin 1 : Low , pin 3 : Disable
10--
Tri-state Function
(Input to pin 1)
Blank* 3.3 V I 0°C to +50°C J (***) ±20ppm **Blank OE B Bulk
1 2.5 V E '-20°C to +70°C R±25ppm **B PDB T Tape and Reel
2 1.8 V F -30°C to +70°C K±30ppm
Ask for Tube Package
*3.3V : Standard N -30°C to +85°C H±35ppm
L-40°C to +85°C B±40ppm
C±50ppm
(***) Available for I, or E temp options only
Contact ABRACON for EJ or LR options (Availability is limited)
PackagingPIN 1(Option)Operating Temp. Freq. Stability
AP3S -Frequency- - - -
Supply Voltage
** OE: Tri-state the output buffer
** PDB: Tri-state the output buffer & shut-off the oscillator,
<10μA when PDB enabled
|||||||||||||||
AP3S
Pb
RoHS
Compliant
3.2 x 2.5 x 1.1mm
SMD CMOS PROGRAMMABLE CRYSTAL OSCILLATOR
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
Dimensions: inch (mm)
Dimensions: mm
Dimensions: mm
OUTLINE DRAWING:
TAPE & REEL: Tape and reel 1,000 pcs/reel
TEST CIRCUIT:
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 02.25.08
Visit www.abracon.com for Terms & Conditions of Sale
PIN
# 1
# 2
# 3
# 4
CONNECTION
STAND-BY / OE
GND/CASE
OUTPUT
VDD
Note: It is recommended
to use an approximately
0.01uF bypass capacitor
between PIN 2 and 4.
