PBW-SERIES Features (1) For equipment designed to conform EMI regulations such as VCCI, CISPR, FCC, VDE, etc. (2) Attenuates conductive emission from power supply (3) Leakage current: 1mA max. (250V, 60Hz) (4) Compact and light weight PBW-1203 Safety standard PBW-1206 ( UL1283, CSA Std. C22. 2 No. 8 VDE0565 Teil. 3 VDE0565 will transfer to EN133200 on and after July 23, 2003. ) PBW-1201 PBW-1202 Specifications Item Model PBW-1201-33 PBW-1202-33 (Note) 1A 2A 1 Rated voltage (AC, DC) 2 Rated current (AC, DC) 3 Test voltage (terminal to case, AC 1 minute) 1500V 4 Isolation resistance (terminal to case, 500VDC) 125V, 60Hz Leakage current 250V, 60Hz 0.35mA max. 5 6 DC resistance 7 Temperature rise 8 Operating temperature range 9 Weight PBW-1203-33 PBW-1206-33 3A 6A 0.25 max. 0.12 max. 60g 60g 250V 100M min. 0.75mA max. 1.2 max. 0.4 max. 30C max. -25 ~ +85C (typ) 60g 60g (Note) : Value at Ta < = 55C. Refer to the derating curve shown below at Ta > 55C. Derating Noise Filter Circuit Outline drawings Case: Plastic (PBT: UL94V-0) (Unit: mm) Request customer specification for further details of specifications, outline, characteristics, etc. Read the instruction manual before usage. Contact us about delivery before ordering. 171 PBW-SERIES CHARACTERISTICS Attenuation (dB) .............. Symmetrical -------- Asymmetrical Attenuation (dB) Typical Insertion Loss Frequency (MHz) 172 Frequency (MHz) Attenuation (dB) Noise Filter Attenuation (dB) Frequency (MHz) Frequency (MHz)