19-22SURSYGC/S187/TR8 - Everlight Electronic Co., Ltd.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 1 of 12

Device No. : DSE-192-016 Prepared date: 13-Jul-2005 Prepared by: Ashley Kuo

Technical Data Sheet

Chip LEDs with Bi-Color(Multi-Color)

19-22SURSYGC/S187/TR8

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Multi-color type.

․Pb-free.

․The product itself will remain within RoHS

compliant version..

Descriptions

․The 19-22 SMD Taping is much smaller

than lead frame type components, thus

enable smaller board size, higher packing

density, reduced storage space and finally

smaller equipment to be obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Automotive: backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip

Material Emitted Color

Lens Color

AlGaInP Brilliant Red

AlGaInP Brilliant Yellow Green Water Clear

EVERLIGHT ELECTRONICS CO.,LTD.

19-22SURSYGC/S187/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 2 of 12

Device No. : DSE-192-016 Prepared date: 13-Jul-2005 Prepared by: Ashley Kuo

Package Outline Dimensions

Note: The tolerances unless mentioned is ±0.1mm,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

19-22SURSYGC/S187/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 3 of 12

Device No. : DSE-192-016 Prepared date: 13-Jul-2005 Prepared by: Ashley Kuo

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage VR 5 V

Forward Current IF SUR:25

SYG:25 mA

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +90 ℃

Soldering Temperature Tsol 260 (for 5 second) ℃

Electrostatic Discharge ESD 2000 V

Power Dissipation Pd SUR:60

SYG:60 mW

Peak Forward Current

(Duty 1/10 @1KHz) IFP SUR:60

SYG:60 mA

Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.

Hand Soldering : 350 ℃ for 3 sec.

EVERLIGHT ELECTRONICS CO.,LTD.

19-22SURSYGC/S187/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 4 of 12

Device No. : DSE-192-016 Prepared date: 13-Jul-2005 Prepared by: Ashley Kuo

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol Min. Typ. Max. Unit Condition

Luminous Intensity Iv SUR

SYG

32

32 ----- 63

63 mcd

Viewing Angle 2θ1/2 ----- 120 ----- deg

Peak Wavelength λp SUR

SYG ----- 632

575 ----- nm

Dominant Wavelength λd SUR

SYG

-----

568.5

624

-----

572.5 nm

Spectrum Radiation

Bandwidth △λ ----- 20 -----

nm

Forward Voltage VF ----- 2.0 2.4 V

IF=20mA

Reverse Current IR ----- ----- 10 μA VR=5V

Notes: Tolerance of Dominant Wavelength ±1nm

EVERLIGHT ELECTRONICS CO.,LTD.

19-22SURSYGC/S187/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 5 of 12

Device No. : DSE-192-016 Prepared date: 13-Jul-2005 Prepared by: Ashley Kuo

SUR

Bin Range Of Luminous Intensity

Bin Min Max Unit Condition

N2 32 50

P1 40 63

mcd IF=20mA

SYG

Bin Range Of Luminous Intensity

Bin Min Max Unit Condition

N2 32 50

P1 40 63

mcd IF=20mA

SYG

Bin Range Of Dom. Wavelength

Bin Min Max Unit Condition

1 568.5 570.5

2 570.5 572.5

nm IF=20mA

Notes: Tolerance of Dominant Wavelength ±1nm

EVERLIGHT ELECTRONICS CO.,LTD.

19-22SURSYGC/S187/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 6 of 12

Device No. : DSE-192-016 Prepared date: 13-Jul-2005 Prepared by: Ashley Kuo

Typical Electro-Optical Characteristics Curves

SUR

EVERLIGHT ELECTRONICS CO.,LTD.

19-22SURSYGC/S187/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 7 of 12

Device No. : DSE-192-016 Prepared date: 13-Jul-2005 Prepared by: Ashley Kuo

Typical Electro-Optical Characteristics Curves

SYG

EVERLIGHT ELECTRONICS CO.,LTD.

19-22SURSYGC/S187/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 8 of 12

Device No. : DSE-192-016 Prepared date: 13-Jul-2005 Prepared by: Ashley Kuo

Label explanation

CAT: Luminous Intensity Rank

HUE: Dom. Wavelength Rank

REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

19-22SURSYGC/S187/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 9 of 12

Device No. : DSE-192-016 Prepared date: 13-Jul-2005 Prepared by: Ashley Kuo

Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Moisture Resistant Packaging

Label Desiccant Label

Aluminum moisture-proof bag

EVERLIGHT ELECTRONICS CO.,LTD.

19-22SURSYGC/S187/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 10 of 12

Device No. : DSE-192-016 Prepared date: 13-Jul-2005 Prepared by: Ashley Kuo

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

No. Items Test Condition

Test

Hours/Cycles Sample

Size Ac/Re

1 Reflow Soldering

Temp. : 260℃±5℃

Min. 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100℃ 15min

∫ 5 min

L : -40℃ 15min

300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min

∫ 10 sec

L : -10℃ 5min

300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1

6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1

EVERLIGHT ELECTRONICS CO.,LTD.

19-22SURSYGC/S187/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 11 of 12

Device No. : DSE-192-016 Prepared date: 13-Jul-2005 Prepared by: Ashley Kuo

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection , otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 The LEDs should be used within a year.

2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.

2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

EVERLIGHT ELECTRONICS CO.,LTD.

19-22SURSYGC/S187/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 12 of 12

Device No. : DSE-192-016 Prepared date: 13-Jul-2005 Prepared by: Ashley Kuo

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of

the hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether

the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com