Resistors Cylindrical Surface Mount Zerohm Jumpers Cylindrical Surface Mount Metal GlazeTM thick film element fired at 1000C to solid ceramic substrate Zerohm Jumpers ZCHP Series Reliable Metal GlazeTM technology Available in all standard CHP sizes Superb solderability - reflow and wave ZCHP Series Operating temperature -55C to +150C * * * * Reliable Metal GlazeTM technology Available in all standard CHP sizes Superb solderability - reflow and wave Operating temperature -55C to +150C OBSOLETE Metal GlazeTM thick film element fired at 1000C to solid ceramic substrate High temperature dielectric coating Solder over nickel barrier High temperature All Pb-free parts comply with EU Directive 2011/65/EU amended by (EU) 2015/863 (RoHS3) dielectric coating Solder over nickel barrier Applications Zerohm Jumpers or Crossovers are basically interconnection devices bewtween points on a PC board. Typically, they are used to connect two points on a PC board due to other circuit paths which must be crossed over. The XCHP Jumpers are available in four case sizes and are supplied on tape and reel to support high volume placement. Electrical Data Size Code Industry Footprint IRC Type Maximum Resistance (m) Current Rating @ 25C (amps) B 1206 ZCHP 1/8 20 3 D 2010 ZCHP 1/2 30 4 F 2512 ZCHP 1 35 5 H 3610 ZCHP 2 35 6 Derate current to "0" amps at 150C. OrderingData Procedure Ordering Sample Part No. Example: ZCHP1LF13 IRC Type Z CHP C1, or H (CHP 1/8, CHP 1/2, CHP 2)P ZCHP 1 (ZCHP1, Pb-free) 1 L 1 Packaging Code* - 13 F 2 1 3 3 BLK = Bulk, 7 = 7" Reel, 13 = 13" Reel 1 2 Type Termination 3 Packing ZCHP1/8 Omit for SnPb ZCHP1/2 LF = Pb-free 7 ZCHP1 7 ZCHP2 13 Standard packing ZCHP1/8 2500/7" reel ZCHP1/2 & 1 1500/7" reel ZCHP2 1500/13" reel Non-standard packing 13 ZCHP1/8, 1/2 & 1 5000/13" reel General Note General Note TT Electronics reserves the right to make changes in product specification without notice or liability. IRC reserves the right to make changes in product specification without notice or liability. Allinformation information is subject toown TT data Electronics' own data and atis time considered at time of going to print. All is subject to IRC's and is considered accurate of going toaccurate print. (c) IRC Wire and Film Technologies Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA (c) TT Electronics Telephone: 361 992 7900 *plc Facsimile: 361 992 3377 * Website: www.irctt.com BI Technologies IRC Welwyn A subsidiary of www.ttelectronics.com/resistors TT electronics plc ZCHP Series Issue September 2008 Sheet 1 of 1 06.18