SanDisk® X600 3D NAND SATA SSD
(Solid State Drive)
EXCEPTIONAL STORAGE OPTIONS FOR A BROAD RANGE
OF COMPUTING APPLICATIONS
SATA SAS PCIe
High Performance and High Capacity for Computing
Based on Western Digital 64-layer 3D NAND, the SanDisk® X600 3D NAND SATA SSD
delivers high performance, high capacity, and superior endurance. In capacities of up
to 2TB, the X600 3D NAND SATA SSD achieves this while expending up to 25% less
power than our previous generations of SATA SSDs.
The X600 3D NAND SATA SSD combines Western Digital’s state-of-the-art 64-layer
3D NAND technology with our proven SSD platform. It also incorporates nCache™ 2.0,
a tiered caching technology designed to improve responsiveness for corporate and
consumer workloads. nCache 2.0 uses a combination of both SLC (single level cell)
and TLC flash blocks to improve endurance, increase eciency, and boost performance.
Writing data first to the SLC cache reduces write amplification on the TLC blocks.
Lower Power, Higher Capacity and Thin Form Factors Oers Design Flexibility
The X600 3D NAND SATA SSD is optimized for the demanding power management
requirements of ultra-thin and small form factor products.
It features Device Sleep (DEVSLP), more frequent use of low-power modes, and faster
transitions between various power modes. Also included for superior error recovery,
DataGuard™ Client provides a robust on-the-fly error handling technology.
With a variety of design and integration options for manufacturers and systems builders,
the X600 3D NAND SATA SSD is available in either an SATA 2.5"/7mm cased or an
M.2 2280 form factor, with capacities of 128 gigabytes2 (GB), 256GB, 512GB, 1 terabyte2 (TB),
and 2 terabyte2 (TB).
X600 KEY FEATURES
WESTERN DIGITAL 64-LAYER 3D NAND
DELIVERS CAPACITIES UP TO 2TB FOR A
MULTITUDE OF DESIGN OPTIONS
ACTIVE POWER DRAW UP TO 25% LESS
POWER THAN THE PREVIOUS GENERATION
OF 2D SSDS
2/5"/7MM CASED OR M.2 2280 FORM
FACTORS PROVIDE NEEDED SPACE
SAVINGS AND DESIGN FLEXIBILITY.
LEADING EDGE SATA PERFORMANCE UP
TO 560MB/S SEQUENTIAL READ
Western Digital Technologies, Inc.
951 SanDisk Drive
Milpitas, CA 95035-7933, USA
www.sandisk.com
SanDisk, the SanDisk logo and nCache are are registered
trademarks or trademarks of Western Digital Corporation or its
aliates in the U.S. and/or other countries. All other marks are
the property of their respective owners. Pictures shown may
vary from actual products.
Western Digital Technologies, Inc. is the seller of record
and licensee in the Americas of SanDisk® products.
©2017 Western Digital Corporation or its aliates.
SanDisk X600 3D NAND SATA SSD Product Features and Specifications
Specifications are subject to change
Form Factor 2.5"/7mm cased, M.2 2280
Interface1,2 SATA 6 Gb/s
Size & Weight 2.5"/7mm cased: 128GB - 1TB: 7.00mm x 69.85mm x 100.2mm @ 37.4g
2TB: 7.00mm x 69.85mm x 100.2mm @ 59.7g
M.2 2280: 128GB - 1TB: 2.23mm x 22.00mm x 80.0mm @ 7 ± 1g
2TB: 2.38mm x 22.00mm x 80.0mm @ 7 ± 1g
Performance [4KB QD32]2,3 128GB 256GB 512GB 1TB 2TB
Sequential Read up to (MB/s) 530 550 560 560 560
Sequential Write up to (MB/s) 490 525 530 530 530
Random Read up to (IOPS) 82K 95K 95K 95K 95K
Random Write up to (IOPS) 74K 81K 84K 84K 84K
Endurance (TBW)472 100 200 400 500
Power5128GB 250GB 500GB 1TB 2TB
Avg. Active Power (mW) 52 52 52 60 60
Max Read Operating (mW) 2050 2200 2050 2550 2650
Max Write Operating (mW) 1700 2250 3350 3750 3800
Slumber (mW) 52 56 56 56 56
DEVSLP (mW) 5-7 5-7 5-7 5-12 5-12
Reliability
MTTF6Up to 1.75M hours
Environmental
Operating Temperatures 0°C to 70°C
Non-operating Temperatures -55°C to 85°C
Operating Vibration 5.0 gRMS, 10 – 2000 Hz
Non-operating Vibration 4.9 gRMS, 7 – 800 Hz
Shock 1,500 G @ 0.5 msec half sine
Certifications FCC, UL, TUV, KC, BSMI, VCCI, Morocco
Limited Warranty75 years
Capacity Form Factor SKU
X600 128GB 2.5"/7mm cased SD9SB8W-128G
X600 256GB 2.5"/7mm cased SD9SB8W-256G
X600 512GB 2.5"/7mm cased SD9SB8W-512G
X600 1TB 2.5"/7mm cased SD9SB8W-1T00
X600 2TB 2.5"/7mm cased SD9SB8W-2T00
X600 128GB M.2 2280 SD9SN8W-128G
X600 256GB M.2 2280 SD9SN8W-256G
X600 512GB M.2 2280 SD9SN8W-512G
X600 1TB M.2 2280 SD9SN8W-1T00
X600 2TB M.2 2280 SD9SN8W-2T00
X600 SED 128GB 2.5"/7mm cased SD9TB8W-128G
X600 SED 256GB 2.5"/7mm cased SD9TB8W-256G
X600 SED 512GB 2.5"/7mm cased SD9TB8W-512G
X600 SED 1TB 2.5"/7mm cased SD9TB8W-1T00
X600 SED 2TB 2.5"/7mm cased SD9TB8W-2T00
X600 SED 128GB M.2 2280 SD9TN8W-128G
X600 SED 256GB M.2 2280 SD9TN8W-256G
X600 SED 512GB M.2 2280 SD9TN8W-512G
X600 SED 1TB M.2 2280 SD9TN8W-1T00
X600 SED 2TB M.2 2280 SD9TN8W-2T00
1 Backwards compatible to SATA 3 Gb/s and SATA 1.5 Gb/s.
2 As used for storage capacity, one megabyte (MB) = one million bytes, one gigabyte (GB) = one billion bytes, and one terabyte (TB) = one trillion bytes. Total accessible capacity varies depending on operating environment. As used for buer or cache, one megabyte (MB) =
1,048,576 bytes. As used for transfer rate or interface, megabyte per second (MB/s) = one million bytes per second, and gigabit per second (Gb/s) = one billion bits per second. Eective maximum SATA 6 Gb/s transfer rate calculated according to the Serial ATA specification
published by the SATA-IO organization as of the date of this specification sheet. Visit www.sata-io.org for details.
3 Measured using CrystalDiskMark, 1000MB LBA range, on Laptop Asus N550J HM86 Express chipset, Windows 8.1 Pro with Intel iRST version 14.8.16.1063, secondary drive with Intel® Core™ i7-4700HQ 2.4GHz, 8GB DDR3 1600MHz RAM.
4 TBW (terabytes written) values calculated using JEDEC client workload (JESD219) and vary by product capacity.
5 Power measurements at 25°C. Based on firmware version with DIPM enabled. Measured using MobileMark® 2014 on Lenovo T560, Intel® Core™ i5-6200U 2.30GHz Processor, DDR3L 4GB 1600MHz RAM, Windows 10 with Intel Driver iRST 14.8.0.1042.
6 MTTF = Mean Time To Failure based on internal testing using Telcordia stress part testing.
7 See http://www.sandisk.com/wug for regional specific warranty details.
