SPECIFICATION SHEET 5A1832 CABLE, ELECTRIC, RADIATION-CROSSLINKED, EXTRUDED, MODIFIED, FLUOROPOLYMER- INSULATED, 27 April 1981 THREE CONDUCTOR, SHIELDED, JACKETED, NORMAL WEIGHT 200C The complete requirements for procuring the cable described herein shall consist of this document and the Issue in effect of Raychem Specification 5A. COMPONENT WIRES - 5580812 SHIELD - SILVER-COATED COPPER JACKET - RADIATION CROSSLINKED, EXTRUDED, MODIFIED FLUGROPOL YMER CABLE CONSTRUCTION DETAILS CONDUCTOR SHIELD JACKET THICKNESS OUTSIDE DIAMETER HAXIMUM PART HUMBER SIZE SIZE (in.) (in.) WEIGHT (awe) (awa) KINI MUM WOHINAL 1/] WOMINAL 1/] MAXIMUM (1b/1000 Ft) 55A1832-26-* 26 38 0060 -0075 Lng 125 11.8 55A1832-24-* 2h 38 0060 0075 130 136 14.7 55A1832-22-* 22 38 .co60 +0075 143 Vag 18.9 55A1832-20-% 20 38 -0060 -0075 . 166 167 24.9 55A1832-18-* 18 38 .0060 -0075 . 184 191 34.0 55A1832-16-* 16 38 0060 -0075 201 209 41.4 55A1832-14-* 14 38 0070 0085 .240 +248 59.4 55A1832-12-* $2 38 -0070 -0085 . -277 287 83.7 I/ Nominal values are for information only. Nominal values are not requirements. CABLE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 200C LIFE CYCLE: 230 + 3C for 500 hours Maximum continuous conductor temperature LOW TEMPERATURE~COLD BEND: -65 + 3C for & hours VOLTAGE RATING: 600 volts (rms) SHIELD COVERAGE: 85% (minimum) ACCELERATED AGING: 300 + 3C for 7 hours THERMAL SHOCK: 300 + 3C for 6 hours BLOCKING: 200 + 3C for 6 hours VOLTAGE WITHSTAND TEST: (After Accelerated Aging, DIELECTRIC WITHSTAND: 1500 volts, 60 Hz tmnersion, Life Cycle, Low Temperature-Cold Bend, and FLAMMABILITY: Thermal Shock) 1000 volts, 60 Hz, | minute Procedure 1, 3 seconds (maximum); 3 in. (maximum); no flaming of facial tissue PART NUMBER: JACKET COLOR: White preferred The '*" in the part numbers above shall be replaced by JACKET ELONGATION AND TENSILE STRENGTH color code designators in accordance with MIL-STD-681 Elongation, 50% (minimum) with @ slash separating component wire colors and a Tensile Strength, 5000 psi (minimum) dash separating the component wire colors from the JACKET FLAWS: jacket color. Spark Test, 1000 volts, 60 Hz (rms), 100% test Example: AWG 20, white, black, and red component Impulse Dielectric Test, 6.0 kV (peak), 100% test wires; white jacket: 55A1832-20-9/0/2-9. Reychem Raychem Corporstion THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. 300 Constitution Drive, Menio Park, California 84025 REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. 415) 361 3333 TWX 910 373 1205