EGP30A THRU EGP30G
GLASS PASSIVATED FAST EFFICIENT RECTIFIER
Forward Voltage - 50 to 400 Volts Reverse Current - 3.0 Amperes
FEATURES
♦ Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
♦ Glass passivated cavity-free junction
♦ Superfast recovery time for high efficiency
♦ Low forward voltage,
high current capability
♦ Low leakage current
♦ High surge current capability
♦ High temperature metallurgically bonded construction
♦High temperature soldering guaranteed:
300°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Molded plastic over solid glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.03 ounce, 0.8 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
EGP EGP EGP EGP EGP EGP
SYMBOLS 30A 30B 30C 30D 30F 30G UNITS
Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 Volts
Maximum RMS voltage VRMS 35 70 105 140 210 280 Volts
Maximum DC blocking voltage VDC 50 100 150 200 300 400 Volts
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55°C I(AV) 3.0 Amps
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load IFSM 125.0 Amps
Maximum instantaneous forward voltage at 3.0A VF0.95 1.25 Volts
Maximum DC reverse current TA=25°C 5.0
at rated DC blocking voltage TA=125°C IR100.0 µA
Typical reverse recover y time (NOTE 1) trr 50.0 ns
Typical junction capacitance (NOTE 2) CJ95.0 75.0 pF
Typical ther mal resistance (NOTE 3) RΘJA 20.0
RΘJL 8.0 °C/W
Operating junction and storage temperature range TJ, TSTG -65 to +150 °C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Ther mal resistance from junction to ambient, and from junction to lead at 0.375” (9.5mm) lead length, P.C.B. mounted
4/98
0.210 (5.3)
0.190 (4.8)
DIA.
0.042 (1.07)
0.037 (0.94)
DIA.
1.0 (25.4)
MIN.
0.375 (9.5)
0.285 (7.2)
1.0 (25.4)
MIN.
Case Style GP20
Dimensions in inches and (millimeters)
*
Glass-plastic encapsulation technique is covered by
Patent No.3,996,602 and brazed-lead assembly by Patent No. 3,930,306
PATENTED*
®
175
0 25 50 75 100 125 150
0
1.0
2.0
3.0
1 10 100
0
25
50
75
100
125
150
175
0.1 1 10 100 1,000
0
30
60
90
120
150
180
210
0.4 0.6 0.8 1.2 1.4 1.6 1.81.0
0.01
0.1
1
10
50
0.2
0.01 0.1 1 10 100
0.1
1
10
100
0 20 40 60 80 100 120
0.001
0.01
0.1
1
10
100
RATINGS AND CHARACTERISTIC CURVES EGP30A THRU EGP30G
FIG. 1 - MAXIMUM FORWARD CURRENT
DERATING CURVE
AMBIENT TEMPERATURE, °C
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
NUMBER OF CYCLES AT 60 HZ
PEAK FORWARD SURGE CURRENT,
AMPERES
FIG. 3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
FIG. 4 - TYPICAL REVERSE LEAKAGE
CHARACTERISTICS
INSTANTANEOUS FORWARD CURRENT,
AMPERES
INSTANTANEOUS REVERSE LEAKAGE CURRENT,
MICROAMPERES
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
FIG. 5 - TYPICAL JUNCTION CAPACITANCE FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE
JUNCTION CAPACITANCE, pF
TRANSIENT THERMAL IMPED ANCE, °CW
REVERSE V OLTAGE, V OLTS t, PULSE DURATION, sec.
TJ=TJmax.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
TJ=150°C
TJ=125°C
TJ=75°C
TJ=25°C
TJ=25°C
TJ=25°C
f=1.0 MHZ
Vsig=50mVp-p
RESISTIVE OR INDUCTIVE LOAD
0.375" (9.5mm) LEAD LENGTH
TJ=25°C
TJ=150°C
EGP30A - EGP30D
EGP30F & EGP30G
PULSE WIDTH=300µs
1% DUTY CYCLE
EGP30A - EGP30D
EGP30F & EGP30G