The PolySwitch families of telecommunications and networking devices help meet the growing demand for resettable overcurrent protection. These product families help provide protection against damage caused by power cross and power induction surges as defined in ITU, Telcordia GR1089 and UL60950. Available in chip, surface-mount and radial-leaded configurations, TE's PolySwitch devices help improve the reliability of customer premise and network equipment worldwide. Benefits Features * Many product choices give engineers help increase design flexibility * RoHS compliant * Compatible with high-volume electronics assembly * Surface-mount, radial-leaded and chip form factors * Assist in meeting regulatory equipment requirements * Fast time-to-trip * Help improve line balance * Agency recognition: UL, CSA, TUV * Applicable for legacy POTS and modern digital communications equipment * Resistance-sorted and matched devices available * Resettable overcurrent protection PolySwitch Resettable Devices - Telecommunications & Networking Devices PolySwitch Resettable Devices Telecommunications and Networking Devices * Low parasitic capacitance/flat impedance with frequency Applications * Modems * PBX systems * Powered ethernet systems * Phone sets * MDF modules * VoIP (Voice over Internet Protocol) equipment * Fax machines * Analog and digital line cards * LAN, WAN equipment * Phone wall outlets * T1/E1 equipment * Customer premise equipment * Alarm systems * xDSL modems and splitters * Access network hardware RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 247 11 247 8/3/13 10:41 AM Application Guide for PolySwitch Telecommunications and Networking Devices* To use this guide, follow the steps below: 1. Select your equipment type from the guide below. 2. Select the type of protection depending on the agency and regional specifications in the second column. 3. Select the form factor for your application. 4. Use the Agency Specification/ PolySwitch Device Selection Guide on the next page to select a specific part number for each application based on the agency requirements. 5. Parts with fast time-to-trip or low resistance are available. Please consult a TE Circuit Protection representative. Application Customer Premise equipment IT equipment Analog Modems, V.90 Modems, ISDN Modems, xDSL Modems, ADSL Splitters, Phone Sets, Fax Machines, Answering Machines, Caller ID, Internet Appliances, PBX Systems, POS Terminals, Wall Plugs Access network equipment () Remote Terminals, Line Repeaters, Multiplexers, Cross-Connects, WAN Equipment Central office switching equipment () Analog/POTS Linecards, ISDN Linecards, xDSL Modems, ADSL/VDSL Splitters, T1/E1 Linecards, Multiplexers, CSU/DSU, Servers Primary protection modules () MDF modules, Network Interface Devices (NID) Region/ Specification Radial-leaded Surface-mount North America TIA-968-A, UL 60950, GR1089 Port Type 3 TRF600-150 TR600-150F-EX TRF600-160 TRF600-250 TRF-600-400 TS600-170F TS600-200F TSM600-250F TSM600-400F Europe/Asia/ South America ITU K.21 TRF250-120 TRF250-120T TRF250-145 TRF250-183 TRF250-184 TS250-130F TSV250-130F TSV250-184F North America GR1089 Port Type 5 TRF600-160 TRF600-250 TRF600-400 TS600-170F TS600-200F TS600-400F TSM600-250F TSM600-400F FT600-1250** Europe/Asia/ TRF250-120 TS250-130F South America ITU K.45 TRF250-120T TRF250-145 TRF250-183 TRF250-184 TSV250-130F TSV250-184F North America GR1089 Port Type 1 TRF600-160 TRF600-250 TRF600-400 TS600-170F TS600-200F TS600-400F TSM600-250F TSM600-400F FT600-1250** Europe/Asia/ South America ITU K.20 TRF250-120 TRF250-120T TRF250-145 TRF250-183 TRF250-184 TS250-130F TSV250-130F TSV250-184F North America Telcordia GR-974 TRF250-183 TRF250-184 TSV250-184F Europe/Asia/ TRF250-055UT TSL250-080F TCF250-100T South America ITU K.20 TRF250-080U TRF250-110U TRF250-120 TRF250-120T TRF250-145 TRF250-183 TRF250-184 TS250-130F TSV250-130F TSV250-184F TCF250-120T TCF250-145T TCF250-180 North America GR1089 Port Type 2 GR1089 Port Type 4 TRF250-080U TRF250-120 TRF250-120T TRF250-145 TRF250-183 TRF250-184 TSL250-080F TS250-130F TSV250-130F TSV250-184F Europe/Asia/ South America ITU K.21 TRF250-120 TRF250-120T TRF250-145 TRF250-183 TSV250-184 TS250-130F TSV250-130F TSV250-184F 11 Short-haul/intrabuilding communications equipment () LAN Equipment, VoIP Cards, Cable Telephony NIUs, Wireless Local Loop Handsets Overcurrent Protection Form Factor Chip TCF250-180 * Applies to all products which share the same prefix. Tested with 230V gas discharge tube primary protector. 248 RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 248 8/3/13 10:41 AM Cont'd Overcurrent Protection Application Region/ Specification Form Factor Radial-leaded Surface-mount LAN Intrabuilding Power Cross Protection North America LAN Equipment, VoIP Cards, IP Phones GR1089 Port Type 4 TSL250-080U TRF250-120 TRF250-120T TRF250-145 TRF250-183 TSL250-080F TS250-130F TSV250-130F TSV250-184F Chip TRF250-184 decaSMDC050F/60-2 IEEE 802.3AF/AT Power over Ethernet protection Powered Ethernet Switches and Terminals, IP phones, Wireless LAN Base Stations, Microcellular Base Stations, VoIP Cards * ** This list is not exhaustive. TE Circuit Protection welcomes our customers' input for additional application ideas for PolySwitch resettable devices. For improved line balance in these applications, resistance-matched parts are recommended. May require additional impedance or coordination with primary protector. FT600-1250 are surface-mount telecom fuse devices. FT600-0500 and FT600-2000 reference also available. See telecom fuses section. For details on decaSMDC050F/60-2, see surface-mount devices section. Agency Specification/Selection Guide for Telecommunications and Networking Devices Use the guide below to select the PolySwitch devices that are typically used in your application. The following pages contain the specifications for the part numbers recommended below. PolySwitch devices assist telecommunication equipment in meeting the applicable protection requirements of these industry specifications. Refer to individual agency specifications for test procedures and circuit schematics. Users should independently evaluate the suitability of and test each product for their application. Family Product* Lightning TCF250 TCF250-100T ITU K.20 - 1.0kV 10/700s PRC YD/T694 GR-1089 Port Types 2 and 4 - 1st Level ITU K.20/21/45 - 0.2A2s PolySwitch Resettable Devices - Telecommunications & Networking Devices Protection Application Guide for PolySwitch Telecommunications and Networking Devices* Power Cross/Contact/Induction ITU K.20/21/45 - 1A2s GR-1089 Port Type 4 - 120VAC, 25Asc TCF250-120T ITU K.20/21/45 - 1.5kV 10/700s ITU K.20/21/45 - 230VAC, 10 TCF250-145T ITU K.20/21/45 - 4.0kV 10/700s ITU K.20/21/45 - 0.2A2s TCF250-180 GR-1089 Port Types 2 and 4 - 1st Level ITU K.20/21/45 - 1A2s ITU K.20/21/45 - 10A2s 11 GR-1089 Port Type 4 - 120VAC, 25Asc * Applies to all products which share the same prefix. Tested with 230V gas discharge tube primary protector. RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 249 249 8/3/13 10:41 AM Agency Specification/Selection Guide for PolySwitch Telecommunications and Networking Devices Cont'd Family Product* Lightning TRF250 TRF250-055UT TRF250-080U ITU K.20 - 1.0kV 10/700s ITU K.20 - 1.0kV 10/700s GR-1089 Port Types 2 and 4 - 1st Level ITU K.20 - 230VAC, 10 ITU K.20 - 230VAC, 10 ITU K.20 - 0.2A2s ITU K.20 - 1A2s GR-1089 Port Type 4 - 120VAC, 25Asc TRF250-110U TRF250-120 TRF250-120T TRF250-120U ITU K.20/21/45 - 1.5kV 10/700s ITU K.20/21/45 - 4.0kV 10/700s GR-1089 Port Types 2 and 4 - 1st Level ITU K.20/21/45 - 230VAC, 10 ITU K.20/21/45 - 0.2A2s ITU K.20/21/45 - 1A2s ITU K.20/21/45 - 10A2s GR-1089 Port Type 4 - 120VAC, 25Asc ITU K.20/21/45 - 1.5kV 10/700s ITU K.20/21/45 - 4.0kV 10/700s GR-1089 Port Types 2 and 4 - 1st Level ITU K.20/21/45 - 230VAC, 10** ITU K.20/21/45 - 0.2A2s ITU K.20/21/45 - 1A2s ITU K.20/21/45 - 10A2s TRF250-120UT TRF250-145 TRF250-145U Power Cross/Contact/Induction TRF250-183 TRF250-184 GR-1089 Port Type 4 - 120VAC, 25Asc TSV250-130F TS250-130F ITU K.20/21/45 - 1.5kV 10/700s ITU K.20/21/45 - 4.0kV 10/700s GR-1089 Port Types 2 and 4 - 1st Level ITU K.20/21/45 - 230VAC, 10 ITU K.20/21/45 - 0.2A2s ITU K.20/21/45 - 1A2s ITU K.20/21/45 - 10A2s GR-1089 Port Type 4 - 120VAC, 25Asc TS250-130F-RB ITU K.20/21/45 - 1.5kV 10/700s ITU K.20/21/45 - 4.0kV 10/700s GR-1089 Port Types 2 and 4 - 1st Level ITU K.20/21/45 - 230VAC, 10 ITU K.20/21/45 - 0.2A2s ITU K.20/21/45 - 1A2s ITU K.20/21/45 - 10A2s GR-1089 Port Type 4 - 120VAC, 25Asc TSV250-184F ITU K.20/21/45 - 1.5kV 10/700s ITU K.20/21/45 - 4.0kV 10/700s GR-1089 Port Types 2 and 4 - 1st Level ITU K.20/21/45 - 230VAC, 10** ITU K.20/21/45 - 0.2A2s ITU K.20/21/45 - 1A2s ITU K.20/21/45 - 10A2s GR-1089 Port Type 4 - 120VAC, 25Asc TSL250 TSL250-080F GR-1089 Port Types 2 and 4 - 1st Level ITU K.20 - 1.0kV 10/700s GR-1089 Port Type 4 - 120VAC, 25Asc ITU K.20/21/45 - 230VAC, 10 ITU K.20/21/45 - 0.2A2s ITU K.20/21/45 - 1A2s TRF600 TRF600-150 TR600-150F-EX TR600-150F-EX-RA-B-0.5 TRF600-160 TRF600-250 TRF600-400 TIA-968-A Types A & B GR-1089 Port Types 1, 3 and 5 - 1st and 2nd Level GR-1089 Port Types 1, 3 and 5 - 1st and 2nd Level GR-1089 Port Types 1, 3 and 5 - 1st and 2nd Level GR-1089 Port Types 1, 3 and 5 - 1st and 2nd Level GR-1089 Port Types 1, 3 and 5 - 1st and 2nd Level UL60950 - 600VAC, 40Asc UL60950 - 600VAC, 40Asc UL60950 - 600VAC, 40Asc Telcordia GR-1089 - 600VAC, 60Asc Telcordia GR-1089 - 600VAC, 60Asc Telcordia GR-1089 - 600VAC, 60Asc TS600 TS600-170F TS600-200F-RA TS600-400F TIA-968-A Types A & B GR-1089 Port Types 1, 3 and 5 - 1st and 2nd Level UL60950 - 600VAC, 40Asc Telcordia GR-1089 - 600VAC, 60Asc TSM600 TSM600-250F TSM600-250F-RA TSM600-400F TIA-968-A Types A & B GR-1089 Port Types 1, 3 and 5 - 1st and 2nd Level TIA-968-A Types A & B GR-1089 Port Types 1, 3 and 5 - 1st and 2nd Level UL60950 - 600VAC, 40Asc Telcordia GR-1089 - 600VAC, 60Asc UL60950 - 600VAC, 40Asc Telcordia GR-1089 - 600VAC, 60Asc FT600 FT600-0500 FT600-1250 FT600-2000 TIA-968-A - Types A & B UL60950 - 600VAC, 40Asc GR-1089 Port Types 1, 3 and 5 - 1st and 2nd Level Telcordia GR-1089 - 600VAC, 60Asc TS250/TSV250 11 * ** 250 Applies to all products that share the same prefix. Tested with 230V gas discharge tube primary protector. Tested with 350V gas discharge tube primary protector. See SCD for additional application fault ratings. May require additional series resistor to help telecommunication equipment pass Surge 3 (1kV, 10/1000s). See telecom fuses section. RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 250 9/3/13 3:02 PM Product Series: Size, Current Rating, Voltage Rating, Typical Resistance for PolySwitch Telecommunications and Networking Devices TCF250 TRF250 TS250 TSV250 TSL250 TS600 TSM600 TRF600 250 250 250 250 250 600 600 ITU GR-1089 Ports 2 and 4 ITU GR-1089 Ports 2 and 4 ITU GR-1089 Ports 2 and 4 ITU GR-1089 Ports 2 and 4 GR-1089 Ports 2 and 4 -- 20.0 -- -- -- -- -- 0.080 -- 17.0 -- -- 8.0 -- -- 0.100 11.0 -- -- -- -- -- -- 0.110 -- 7.0 -- -- -- -- -- 0.120 10.5 8.0 -- -- -- -- -- VMAX Interrupt (VAC)* Specification UL60950 UL60950 GR-1089 GR-1089 Ports 1, 3 and 5 Ports 1, 3 and 5 Hold Current (A) 0.055 0.130 -- -- 9.0 5.5 -- -- -- 0.145 7.0 4.5 -- -- -- -- -- 0.150 -- -- -- -- -- -- 8.0 0.160 -- -- -- -- -- -- 6.0 0.170 -- -- -- -- -- 11.0 -- 0.183 -- 1.3 -- -- -- -- -- 0.184 -- 1.9 -- 1.6 -- -- -- 0.200 -- -- -- -- -- 8.5 -- 0.250 -- -- -- -- -- 3.5 3.0 0.400 -- -- -- -- -- 1.2 1.2 Voltage Ratings for Telecommunications and Networking Devices For circuit protection telecommunications devices there are two applicable voltage ratings. These are VMAX Operating and VMAX Interrupt. To help understand the nature of these two different voltage ratings, the following definitions are provided: PolySwitch Resettable Devices - Telecommunications & Networking Devices Table T1 VMAX Operating : For telecommunications devices, this is the voltage used to obtain component recognition under UL1434. Most circuit protection devices are certified at 60V but can withstand higher VMAX Interrupt conditions. See Table T3 for its VMAX Operating. *VMAX Interrupt : Under specified conditions, this is the highest voltage that can be applied to the device at the maximum current. Devices may trip safely under higher power level cross conditions, as listed above, to assist equipment in meeting the appropriate industry conditions. 11 RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 251 251 8/3/13 10:41 AM Table T2 Thermal Derating for PolySwitch Telecommunications and Networking Devices [Hold Current (A) at Ambient Temperature (C)] Maximum Ambient Temperature Part Number -40C -20C 0C 20C 40C 50C 60C 70C 85C Chip* -- 250VAC TCF250 TCF250-100T 0.155 0.138 0.119 0.100 0.083 0.073 0.064 0.055 0.042 TCF250-120T 0.186 0.165 0.143 0.120 0.099 0.088 0.077 0.066 0.050 TCF250-145T 0.225 0.199 0.172 0.145 0.119 0.106 0.093 0.080 0.060 TCF250-180 0.269 0.240 0.211 0.180 0.153 0.138 0.123 0.109 0.087 TRF250-055UT 0.085 0.076 0.065 0.055 0.045 0.041 0.035 0.030 0.023 TRF250-080U 0.124 0.110 0.095 0.080 0.066 0.059 0.051 0.044 0.033 TRF250-110U 0.171 0.151 0.131 0.110 0.091 0.081 0.071 0.061 0.046 TRF250-120 0.186 0.165 0.143 0.120 0.099 0.088 0.077 0.066 0.050 TRF250-145 0.225 0.199 0.172 0.145 0.119 0.106 0.093 0.080 0.060 TRF250-183 0.284 0.251 0.217 0.183 0.149 0.133 0.117 0.101 0.075 TRF250-184 0.286 0.252 0.218 0.184 0.150 0.134 0.118 0.102 0.075 Radial-leaded* -- 250VAC TRF250 Surface-mount* -- 250VAC TS250/TSL250/TSV250 TSL250-080F 0.124 0.110 0.095 0.080 0.066 0.059 0.051 0.044 0.033 TS250-130F 0.208 0.182 0.156 0.130 0.104 0.091 0.078 0.065 0.045 TSV250-130F 0.208 0.182 0.156 0.130 0.104 0.091 0.078 0.065 0.045 TSV250-184F 0.286 0.252 0.218 0.184 0.150 0.134 0.118 0.102 0.075 Radial-leaded -- 600VAC TRF600 TRF600-150 0.239 0.209 0.180 0.150 0.121 0.107 0.093 0.079 0.057 TR600-150F-EX 0.239 0.209 0.180 0.150 0.121 0.107 0.093 0.079 0.057 TR600-150F-EX-RA 0.239 0.209 0.180 0.150 0.121 0.107 0.093 0.079 0.057 TRF600-160 0.255 0.223 0.192 0.160 0.129 0.114 0.099 0.084 0.061 TRF600-250 0.400 0.350 0.300 0.250 0.198 0.170 0.140 0.117 0.083 TRF600-400 0.640 0.560 0.480 0.400 0.320 0.270 0.230 0.190 0.130 TS600-170F 0.264 0.230 0.200 0.170 0.140 0.125 0.109 0.094 0.070 TS600-200F-RA-B-0.5 0.310 0.275 0.238 0.200 0.165 0.147 0.128 0.110 0.083 TS600-400F 0.640 0.560 0.480 0.400 0.320 0.270 0.230 0.190 0.130 TSM600-250F 0.400 0.350 0.300 0.250 0.198 0.170 0.140 0.117 0.083 TSM600-250F-RA 0.400 0.350 0.300 0.250 0.198 0.170 0.140 0.117 0.083 TSM600-400F 0.640 0.560 0.480 0.400 0.320 0.270 0.230 0.190 0.130 Surface-mount -- 600VAC TS600/TSM600 * 250VAC interrupt products may help equipment pass ITU K.20, K.21 and K.45 recommendations and Telcordia GR-1089 Port Type 2 and 4 requirements. 600VAC interrupt products may help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 and 5 requirements. Product is not currently available in a resistance matched or sorted option. Figure T1 Thermal Derating [Hold Current (A) at Ambient Temperature (C)] A B = = TCF250-180 All other TCF, TRF, TSM Series Devices 200 % of Rated Hold and Trip Current 11 Figure T1 B 150 A 100 A 50 B 0 -40 -20 0 20 40 60 80 Device's Ambient Temperature (C) 252 RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 252 8/3/13 10:41 AM VMAX Part Number IH (A) IT (A) Operating Interrupt (VRMS) (VDC) IMAX* Interrupt (A) PD Typ (W) Typical Time-to-trip (A) (s) RMIN () RMAX () R1MAX () Chip* -- 250VAC TCF250 TCF250-100T 0.100 0.150 60 250 3.0 0.6 1.0 0.2 14.0 18.0 24.0 TCF250-120T 0.120 0.240 60 250 3.0 1.0 1.0 0.6 6.3 12.0 18.0 TCF250-145T 0.145 0.290 60 250 3.0 1.0 1.0 1.5 5.0 9.0 14.0 TCF250-180 0.180 0.650 60 250 3.0 0.9 1.0 15.5 1.0 2.2 4.0 Radial-leaded* -- 250VAC TRF250 TRF250-055UT 0.055 0.170 60 250 3.0 0.6 0.28 3.0 15.0 25.0 35.0 TRF250-080T 0.080 0.160 60 250 3.0 0.6 0.35 2.5 15.0 22.0 33.0 TRF250-080U 0.080 0.160 60 250 3.0 0.6 0.35 2.5 14.0 20.0 33.0 TRF250-110U 0.110 0.220 60 250 3.0 1.0 1.00 0.8 5.0 9.0 16.0 TRF250-120 0.120 0.240 60 250 3.0 1.0 1.00 1.5 4.0 8.0 16.0 TRF250-120T 0.120 0.240 60 250 3.0 1.0 0.35 0.7 7.0 12.0 16.0 TRF250-120T-RA 0.120 0.240 60 250 3.0 1.0 1.00 1.2 7.0 9.0 16.0 TRF250-120T-RC 0.130 0.260 60 250 3.0 1.0 1.00 1.5 5.4 7.5 14.0 TRF250-120T-RF 0.120 0.240 60 250 3.0 1.0 1.00 0.9 6.0 10.5 16.0 TRF250-120T-R1 0.120 0.240 60 250 3.0 1.0 1.00 1.0 6.0 9.0 16.0 TRF250-120T-R2 0.120 0.240 60 250 3.0 1.0 1.00 0.8 8.0 10.5 16.0 TRF250-120U 0.120 0.240 60 250 3.0 1.0 1.00 1.0 6.0 10.0 16.0 TRF250-120UT 0.120 0.240 60 250 3.0 1.0 1.00 0.7 7.0 12.0 16.0 TRF250-145 0.145 0.290 60 250 3.0 1.0 1.00 2.5 3.0 6.0 14.0 TRF250-145-RA 0.145 0.290 60 250 3.0 1.0 1.00 2.5 3.0 5.5 12.0 TRF250-145-RB 0.145 0.290 60 250 3.0 1.0 1.00 2.0 4.5 6.0 14.0 TRF250-145T 0.145 0.290 60 250 3.0 1.0 1.00 1.5 5.4 7.5 14.0 TRF250-145U 0.145 0.290 60 250 3.0 1.0 1.00 2.0 3.5 6.5 14.0 TRF250-183 0.183 0.685 100 250 10.0 0.9 3.00 0.6 0.8 2.2 3.4 TRF250-184 0.184 1.000 100 250 10.0 0.9 3.00 0.5 1.2 2.4 3.1 Surface-mount* -- 250VAC TS250/TSL250/TSV250 TSL250-080F 0.080 0.240 80 250 3.0 1.2 1.0 0.8 5.0 11.0 20.0** TS250-130F 0.130 0.260 60 250 3.0 1.1 1.0 0.9 6.5 12.0 20.0** -- -- 60 600 1.0 -- -- -- -- -- -- TS250-130F-RA 0.130 0.260 60 250 3.0 1.1 1.0 1.4 6.5 9.0 15.0** -- -- 60 600 1.0 -- -- -- -- -- -- TS250-130F-RB 0.130 0.260 60 250 3.0 1.1 1.0 0.7 9.0 12.0 20.0** -- -- 60 600 1.0 -- -- -- -- -- -- TS250-130F-RC 0.130 0.260 60 250 3.0 1.1 1.0 1.1 7.0 10.0 17.0** -- -- 60 600 1.0 -- -- -- -- -- -- TSV250-130F 0.130 0.260 60 250 3.0 1.5 1.0 2.0 4.0 7.0 12.0** TSV250-184F 0.184 0.690 100 250 10.0 0.9 3.0 0.5 1.2 3.0 4.0** PolySwitch Resettable Devices - Telecommunications & Networking Devices Table T3 Electrical Characteristics for PolySwitch Telecommunications and Networking Devices Radial-leaded -- 600VAC TRF600 TRF600-150 0.150 0.300 250 600 3.0 1.4 1.0 1.4 6.0 10.0 17.0 TRF600-150-RB 0.130 0.260 250 600 3.0 1.0 1.0 1.0 9.0 12.0 22.0 TR600-150F-EX 0.150 0.300 250 600 3.0 1.4 1.0 5.0 6.0 12.0 22.0 TR600-150F-EX-RA-B-0.5 0.150 0.300 250 600 3.0 1.4 1.0 5.0 7.0 10.0 20.0 TRF600-160 0.160 0.320 250 600 3.0 1.7 1.0 7.5 4.0 10.0 18.0 TRF600-160-RA 0.160 0.320 250 600 3.0 1.7 1.0 9.5 4.0 7.0 16.0 17.0 TRF600-160-R1 0.160 0.320 250 600 3.0 1.7 1.0 9.0 4.0 8.0 TRF600-250 0.250 0.850 250 600 3.0 2.0 3.0 1.0 1.0 4.3 7.0 TRF600-400 0.400 1.000 60 600 3.0 2.4 3.0 4.0 0.95 1.45 1.90 * ** 11 250VAC interrupt products may help equipment pass ITU K.20, K.21 and K.45 recommendations and Telcordia GR-1089 Port Type 2 and 4 requirements. 600VAC interrupt products may help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 and 5 requirements. Product is not currently available in a resistance matched or sorted option. R1MAX measured 1 hour post-trip or 24 hours post-reflow at 20C. RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 253 253 9/3/13 2:59 PM Table T3 Electrical Characteristics for PolySwitch Telecommunications and Networking Devices VMAX Part Number IH (A) IT (A) Operating (VDC) IMAX* Interrupt (A) Interrupt (VRMS) PD Typ (W) Typical Time-to-trip (A) (s) RMIN () RMAX () Cont'd R1MAX () Surface-mount -- 600VAC TS600/TSM600 0.170 0.400 60 600 3.0 2.5 1.0 10.0 4.0 9.0 18.0 TS600-200F-RA-B-0.5 0.200 TS600-170F 0.400 60 600 3.0 2.5 1.0 12.0 4.0 7.5 13.5 TS600-400F 0.400 1.000 60 600 3.0 2.0 3.0 5.0 0.5 1.5 2.0 TSM600-250F 0.250 0.860 250 600 3.0 2.0 3.0 0.8 1.0 3.5 7.0 TSM600-250F-RA 0.250 0.860 250 600 3.0 2.0 3.0 1.0 1.0 3.0 5.0 TSM600-400F 0.400 1.000 250 600 3.0 2.0 3.0 5.0 0.5 1.5 2.0 Notes: IH IT VMAX Operating VMAX Interrupt IMAX Interrupt PD RMIN RMAX R1MAX : Hold current: maximum current device will pass without interruption in 20C still air. : Trip current: minimum current that will switch the device from low resistance to high resistance in 20C still air. : Maximum continuous voltage device can withstand without damage at rated current. This voltage is used for component recognition under UL1434. : Maximum voltage that can be safely placed across a device in its tripped state. Devices may trip safely under higher level power cross conditions to assist equipment in meeting the appropriate ITU, UL60950 or GR1089 industry requirements. : Maximum fault current device can withstand without damage at rated operating voltage. This current is used for component recognition under UL1434. Devices may trip safely under higher level power cross conditions to assist equipment in meeting the appropriate ITU, UL60950 or GR1089 industry requirements. : Power dissipated from device when in the tripped state in 20C still air. : Minimum resistance of device as supplied at 20C unless otherwise specified. : Maximum resistance of device as supplied at 20C unless otherwise specified. : Maximum resistance measured one hour post-trip or post-reflow at 20C. * 250VAC interrupt products may help equipment pass ITU K.20, K.21 and K.45 recommendations and Telcordia GR-1089 Port Type 2 and 4 requirements. 600VAC interrupt products may help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 and 5 requirements. Figures T2-T13 Dimension Figures for PolySwitch Telecommunications and Networking Devices Figure T2 Figure T3 A Figure T4 A C C C A B B B D D E CL to CL E CL to CL Figure T5 Figure T6 Figure T7 A 11 C C C B D B F B D 254 A E D D E A E RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 254 8/3/13 10:41 AM Figure T8 Figure T9 C C B F F B D D A E E G D E A Figure T10 Figure T11 A A C to C B B D D D E CL to CL CL Figure T13 A A C B E CL Figure T12 C E CL to CL Cont'd PolySwitch Resettable Devices - Telecommunications & Networking Devices Figures T2-T13 Dimension Figures for PolySwitch Telecommunications and Networking Devices B D E CL to CL 11 RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 255 255 8/3/13 10:41 AM Table T4 Dimensions & Weights for PolySwitch Telecommunications and Networking Devices A Part Number B Min Max 4.6 4.9 Min Max 4.6 4.9 Dimensions in Millimeters (Inches) C D E Min Max Min Max Min Max Min Max Min Max 2.0 F G Device Mass (g) Figure (Only for Reference) TCF-250V* TCF250-100T (0.18) (0.19) TCF250-120T 5.4 5.6 (0.21) (0.22) TCF250-145T 5.4 5.6 (0.21) (0.22) TCF250-180 6.9 7.1 (0.27) (0.28) (0.18) (0.19) 5.4 5.6 (0.21) (0.22) 5.4 5.6 (0.21) (0.22) 6.9 7.1 (0.27) (0.28) 2.3 -- -- -- -- -- -- -- -- T4 0.24 -- -- -- -- -- -- -- -- T4 0.28 -- -- -- -- -- -- -- -- T4 0.28 -- -- -- -- -- -- -- -- T4 0.35 -- 5.0 -- -- -- -- -- T2 0.13 -- -- -- -- -- T2 0.28 -- -- -- -- -- T11 0.13 -- -- -- -- -- T11 0.13 -- -- -- -- -- T3 0.38 -- -- -- -- -- T10 0.19 -- -- -- -- -- T3 0.38 -- -- -- -- -- T10 0.19 -- -- -- -- -- T2 0.30 -- -- -- -- -- T12 0.32 3.1 -- -- -- -- T7 2.80 -- -- -- -- T5 3.60 1.90 1.60 2.30 -- -- T6 2.80 (0.08) (0.07) (0.09) -- -- T6 2.80 -- -- T3 0.37 (0.08) (0.09) 2.0 2.3 (0.08) (0.09) 2.0 2.5 (0.08) (0.10) 1.3 1.6 (0.05) (0.06) TRF250-250V* TRF250-055UT -- 4.8 -- (0.19) TRF250-080T -- 5.8 -- (0.23) TRF250-080U -- 4.8 -- 5.3 -- -- 6.5 -- -- 6.0 -- -- 6.5 -- -- 6.0 -- -- 7.5 -- -- 7.7 -- 11.0 -- 10.0 -- 11.0 -- 10.0 -- (0.39) -- (0.29) TRF250-184 9.4 (0.43) (0.24) TRF250-183 -- (0.39) (0.26) TRF250-145U 9.3 (0.43) (0.24) TRF250-145 -- (0.37) (0.26) TRF250-120U 9.9 (0.37) (0.21) TRF250-120 -- (0.39) (0.19) TRF250-110U 9.3 (0.37) 10.5 -- (0.41) -- (0.30) 10.5 -- (0.41) 3.8 4.7 (0.15) (0.19) 4.6 4.7 (0.18) (0.19) 3.8 4.7 (0.15) (0.19) 3.8 4.7 (0.15) (0.19) 4.6 4.7 (0.18) (0.19) 3.8 4.7 (0.15) (0.19) 4.6 4.7 (0.18) (0.19) 3.8 4.7 (0.15) (0.19) 4.1 4.7 (0.16) (0.19) 4.6 4.7 (0.18) (0.19) (0.20) -- 5.0 (0.20) -- 5.0 (0.20) -- 5.0 (0.20) -- 5.0 (0.20) -- 5.0 (0.20) -- 5.0 (0.20) -- 5.0 (0.20) -- 5.0 (0.20) -- 5.0 (0.20) TS250/TSL250/TSV250-250V* TSL250-080F 6.7 7.9 (0.27) (0.31) TS250-130F 8.5 9.4 2.7 -- (0.34) (0.37) TSV250-130F -- 6.10 -- 6.10 3.4 4.8 -- 6.90 -- -- (0.27) -- (0.24) 6.90 5.3 (0.19) (0.21) (0.14) (0.24) TSV250-184F 3.7 (0.11) (0.15) -- (0.27) 0.2 0.4 (0.01) (0.02) 7.4 0.3 (0.29) (0.01) 3.20 0.56 (0.13) (0.02) 3.20 0.56 (0.13) (0.02) -- 2.5 (0.10) (0.12) 3.8 -- (0.15) -- -- -- -- 1.90 1.60 (0.08) (0.07) (0.09) 2.30 TRF600-600V TRF600-150 -- 9.0 -- (0.35) TR600-150F-EX -- 13.5 -- (0.53) TR600-150F-EX-RA-B-0.5 11 -- 13.5 -- 16.0 -- TRF600-400 -- -- 12.6 -- 12.6 -- (0.50) -- (0.63) TRF600-250 -- (0.50) (0.53) TRF600-160 12.5 (0.49) 12.6 -- (0.50) 4.6 4.7 (0.18) (0.19) 6.0 4.7 (0.18) (0.19) 6.0 4.7 (0.18) (0.19) 6.0 4.7 (0.24) (0.19) -- 5.0 -- 5.0 -- 5.0 -- 5.0 14.5 4.6 4.7 5.0 (0.18) (0.19) (0.20) 13.1 (0.52) -- 4.6 4.7 (0.18) (0.19) -- -- -- -- -- T3 0.80 -- -- -- -- -- T3 0.80 -- -- 10.0 -- -- T13 0.90 -- T3 0.87 -- T13 0.85 (0.20) (0.57) -- 9.0 (0.35) (0.20) 15.0 14.8 -- (0.20) (0.59) (0.58) -- (0.20) -- 5.0 (0.39) -- 10.0 (0.39) -- -- -- -- (0.20) * 250VAC interrupt products may help equipment pass ITU K.20, K.21 and K.45 recommendations and Telcordia GR-1089 Port Type 2 and 4 requirements. 600VAC interrupt products may help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 and 5 requirements. Indicates dimension is typical, not minimum. 256 RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 256 8/3/13 10:41 AM A Part Number Min B Max Min Max Cont'd Dimensions in Millimeters (Inches) C D E Min Max Min Max Min Max Min Max Min Max 7.2 1.5 2.3 -- -- T8 23.6 -- -- T8 23.6 -- -- T8 19.8 2.2 3.1 T9 31.2 T9 31.2 T9 31.2 F G Device Mass (g) Figure (Only for Reference) TS600/TSM600-600V TS600-170F 18.3 19.4 (0.72) (0.77) TS600-200F-RA 18.3 19.4 (0.72) (0.77) TS600-400F 18.3 19.4 11.6 12.3 (0.46) (0.49) 11.6 12.3 (0.46) (0.49) 11.6 12.3 8.3 (0.29) (0.33) 7.2 8.3 (0.29) (0.33) 7.2 8.3 (0.72) (0.77) (0.46) (0.49) (0.29) (0.33) TSM600-250F 1.7 2.4 9.9 (0.07) (0.10) 1.7 2.4 9.9 (0.07) (0.10) 1.7 2.4 17.0 17.60 11.20 11.70 10.40 11.20 4.80 (0.67) (0.69) (0.44) (0.46) (0.41) (0.44) (0.19) (0.20) TSM600-250F-RA 5.20 17.0 17.60 11.20 11.70 10.40 11.20 4.80 (0.67) (0.69) (0.44) (0.46) (0.41) (0.44) (0.19) (0.20) 17.0 17.60 11.20 11.70 10.40 11.20 4.80 (0.67) (0.69) (0.44) (0.46) (0.41) (0.44) (0.19) (0.20) TSM600-400F 5.20 5.20 10.4 1.5 2.3 (0.39) (0.41) (0.06) (0.09) 9.9 (0.07) (0.10) 10.4 (0.39) (0.41) (0.06) (0.09) 10.4 1.5 2.3 (0.39) (0.41) (0.06) (0.09) 2.50 2.80 0.60 1.0 (0.10) (0.11) (0.02) (0.04) 2.50 2.80 0.60 (0.09) (0.12) 1.0 2.2 (0.10) (0.11) (0.02) (0.04) 2.50 2.80 0.60 3.1 (0.09) (0.12) 1.0 2.2 (0.10) (0.11) (0.02) (0.04) 3.1 (0.09) (0.12) 600VAC interrupt products may help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 and 5 requirements. TCF250 A = TCF250-180 B = TCF250-145T C = TCF250-120T D = TCF250-100T Figure T14 100 A B 10 Time-to-Trip (s) C D 1 A PolySwitch Resettable Devices - Telecommunications & Networking Devices Table T4 Dimensions & Weights for PolySwitch Telecommunications and Networking Devices B C 0.10 D 0.01 0.00 0.20 0.40 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 Fault Current (A) Figure T15 1000 11 A 100 B C Time-to-Trip (s) TRF250 A = TRF250-180/183/184 B = TRF250-145/145U C = TRF250-120/120U D = TRF250-110U/120UT/120T E = TRF250-080T/080U/080US 10 E D 1 A B C D 0.10 E 0.01 0.00 RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 257 0.20 0.40 0.60 0.80 1.00 1.20 1.40 1.60 1.80 Fault Current (A) 2.00 2.20 2.40 2.60 2.80 3.00 257 8/3/13 10:41 AM Figures T14-T17 Typical Time-to-Trip Curves at 20C for PolySwitch Telecommunications and Networking Devices TS250/TSV250/TSL250 A = TSV250-184F B = TSV250-130F C = TS250-130F D = TSL250-080F Cont'd Figure T16 B C A Time-to-Trip (s) D A B C D 0.00 0.50 1.00 1.50 2.00 2.50 3.00 Fault Current (A) Figure T17 1000 C 100 D B A E Time-to-Trip (s) TRF600/TS600/TSM600 A = TRF600-400/TS600-400/ TSM600-400F B = TRF600-250/TSM600-250F/ TS600-170F/200F C = TRF600-160 D = TR600-150F-EX E = TRF600-150 10 1 A B C D E 0.1 0.01 0 1 2 3 4 5 6 7 Fault Current (A) Table T5 Physical Characteristics and Environmental Specifications for PolySwitch Telecommunications and Networking Devices Operating temperature range for all listed products is -40C to 85C, except for TRF250-080T and TRF250-184 (0C to 85C) TCF250* Physical Characteristics 11 Terminal Material Nickel-plated Copper Foil Environmental Specifications Test Passive Aging Humidity Aging Thermal Shock Solvent Resistance Conditions 60C, 1000 hrs 85C, 1000 hrs 85C, 85% RH, 1000 hrs 125C, -55C (10 Times) MIL-STD-202, Method 215F Note: Storage conditions: 40C (max), 70% RH (max), devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded. 258 RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 258 8/3/13 10:41 AM Physical Characteristics and Environmental Specifications for PolySwitch Telecommunications and Networking Devices Cont'd Operating temperature range for all listed products is -40C to 85C, except for TRF250-080T and TRF250-184 (0C to 85C) TRF250* Physical Characteristics Lead Material Insulating Material Flammability Soldering Characteristics Solder Heat Withstand Tin-plated Copper, 22AWG Cured Epoxy Polymer Per IEC 695-2-2 Needle Flame Test for 20 s ANSI/J-STD-002, Category 3 IEC-STD 68-2-20, Test Tb, Section 5 Method 1A, Condition B: Can Withstand 10s at 260C5C Note: Devices are not intended to be placed through a reflow process. Environmental Specifications Test Passive Aging Humidity Aging Thermal Shock Solvent Resistance Conditions 60C, 1000 hrs 85C, 1000 hrs 85C, 85% RH, 1000 hrs 125C, -55C (10 Times) MIL-STD-202, Method 215F Note: Storage conditions: 40C (max), 70% RH (max), devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded. TS250/TSV250/TSL250* Physical Characteristics Terminal Material Soldering Characteristics Tin-plated Brass, Nickel Under-plating EIC 60008-2-58 Environmental Specifications Test Passive Aging Humidity Aging Thermal Shock Solvent Resistance Conditions 60C, 1000 hrs 85C, 1000 hrs 85C, 85% RH, 500 hrs 125C, -55C (10 Times) MIL-STD-202, Method 215F Note: Storage conditions: 40C (max), 70% RH (max), devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded. PolySwitch Resettable Devices - Telecommunications & Networking Devices Table T5 TRF600 Physical Characteristics Lead Material Insulating Material Flammability Soldering Characteristics Solder Heat Withstand Tin-plated Copper, 22AWG Cured Epoxy Polymer Per IEC 695-2-2 Needle Flame Test for 20s ANSI/J-STD-002, Category 3 IEC-STD 68-2-20, Test Tb, Section 5 Method 1A, Condition B: Can Withstand 10 s at 260C5C Note: Devices are not intended to be placed through a reflow process. 11 Environmental Specifications Test Passive Aging Humidity Aging Thermal Shock Solvent Resistance Conditions 60C, 1000 hrs 85C, 1000 hrs 85C, 85% RH, 1000 hrs 125C, -55C (10 Times) MIL-STD-202, Method 215F Note: Storage conditions: 40C (max), 70% RH (max) devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded. * 250VAC interrupt products may help equipment pass ITU K.20, K.21 and K.45 recommendations and Telcordia GR-1089 Port Type 2 and 4 requirements. 600VAC interrupt products may help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 and 5 requirements. Excluding TRF600-150 and TRF600-400, which have a coating that is not rated for dielectric withstand and can withstand 500h at 85C/85% RH or 1000h at 60C/90% RH. RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 259 259 8/3/13 10:41 AM Table T5 Physical Characteristics and Environmental Specifications for PolySwitch Telecommunications and Networking Devices Cont'd Operating temperature range for all listed products is -40C to 85C, except for TRF250-080T and TRF250-184 (0C to 85C) TS600 Physical Characteristics Terminal Material Insulating Material Flammability Soldering Characteristics Solder Heat Withstand Tin-plated Brass Nylon Resin (UL94V-0), 1000V Dielectric Rating IEC 695-2-2 Needle Flame Test for 20 s ANSI/J-STD-002, Category 3 IEC-STD 68-2-20, Test Tb, Section 5 Method 1A Environmental Specifications Test Passive Aging Humidity Aging Thermal Shock Solvent Resistance Conditions 60C, 1000 hrs 85C, 1000 hrs 85C, 85% RH, 1000 hrs 125C, -55C (10 Times) MIL-STD-202, Method 215F Note: Storage conditions: 40C (max), 70% RH (max), devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded. TSM600 Physical Characteristics Terminal Material Insulating Material Flammability Soldering Characteristics Solder Heat Withstand Tin-plated Brass Nylon Resin (UL94V-0), 1000V Dielectric Rating IEC 695-2-2 Needle Flame Test for 20 s EIC60068-2-58, Method 7 IEC-STD 68-2-20, Test Tb, Section 5 Method 1A Environmental Specifications Test Passive Aging Humidity Aging Storage Humidity Thermal Shock Solvent Resistance Conditions 60C, 1000 hrs 85C, 1000 hrs 85C, 85% RH, 1000 hrs Per IPC/JEDEC J-STD-020A Level 2a 125C, -55C (10 Times) MIL-STD-202, Method 215J Note: Storage conditions: 40C (max), 70% RH (max) devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded. 600VAC interrupt products may help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 and 5 requirements. 11 260 RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 260 8/3/13 10:41 AM Packaging and Marking Information for PolySwitch Telecommunications and Networking Devices Part Number Bag Quantity Tape and Reel Quantity Standard Package Quantity Part Marking Agency Recognition Chip* -- 250VAC TCF250 TCF250-100T 2,500 -- 10,000 -- -- TCF250-120T 2,500 -- 10,000 -- -- TCF250-145T 2,500 -- 10,000 -- -- TCF250-180 Radial-leaded* -- 250VAC TRF250 2,500 -- 10,000 -- UL TRF250-055UT 500 -- 10,000 -- -- TRF250-080U 500 -- 10,000 -- UL, CSA, TUV -- 1,500 7,500 -- UL, CSA, TUV TRF250-080T 500 -- 10,000 08F UL, CSA, TUV TRF250-110U 500 -- 10,000 -- UL, CSA, TUV TRF250-120 TRF250-080U-2 500 -- 10,000 20F UL, CSA, TUV TRF250-120-2 -- 1,500 7,500 20F UL, CSA, TUV TRF250-120T 500 -- 10,000 20F UL, CSA, TUV -- 1,500 7,500 20F UL, CSA, TUV 500 -- 10,000 20F UL, CSA, TUV TRF250-120U-2 -- 1,500 7,500 20F UL, CSA, TUV TRF250-120UT 500 -- 10,000 20F UL, CSA, TUV TRF250-145 500 -- 10,000 45F UL, CSA, TUV TRF250-120T-2 TRF250-120U TRF250-145-2 -- 1,500 7,500 45F UL, CSA, TUV TRF250-145-RA 500 -- 10,000 45F UL, CSA, TUV TRF250-145U 500 -- 10,000 45F UL, CSA, TUV -- 1,500 7,500 45F UL, CSA, TUV 500 -- 10,000 83F UL, CSA, TUV -- 1,500 7,500 83F UL, CSA, TUV 500 -- 10,000 84F UL, CSA, TUV TSL250-080F-2 -- 1,500 7,500 T08 UL, CSA,TUV TS250-130F-2 -- 1,500 7,500 T13 UL, CSA, TUV TSV250-130F-2 -- 1,200 6,000 T13V UL, CSA, TUV TSV250-184F Radial-leaded -- 600VAC TRF600 2500 -- 10,000 T18V UL TRF600-150 500 -- 10,000 150F UL, CSA, TUV TRF250-145U-2 TRF250-183 TRF250-183-2 TRF250-184 Surface-mount* -- 250VAC TS250/TSL250/TSV250 TRF600-150-2 -- 1,500 7,500 150F UL, CSA, TUV 500 -- 10,000 150F UL, CSA -- 600 3,000 150F UL, CSA TR600-150F-EX-RA-B-0.5 500 -- 10,000 150F UL, CSA TRF600-160 500 -- 10,000 160F UL, CSA, TUV -- 600 3,000 160F UL, CSA, TUV TRF600-250 500 -- 10,000 250F UL, CSA, TUV TRF600-400 Surface-mount -- 600VAC TS600/TSM600 500 -- 10,000 400F UL, CSA TS600-170F-2 -- 300 900 T20 UL, CSA TS600-200F-RA-2 -- 300 900 T20 UL, CSA TS600-400F-2 -- 300 900 T40 UL, CSA TSM600-250F-2 -- 200 1,000 TSM600 UL, CSA TSM600-250F-RA-2 -- 200 1,000 TSM600 UL, CSA TSM600-400F-2 -- 200 1,000 TSM600 UL TR600-150F-EX TR600-150F-EX-2 TRF600-160-2 PolySwitch Resettable Devices - Telecommunications & Networking Devices Table T6 11 * 250VAC interrupt products are designed to help equipment pass ITU K.20, K.21 and K.45 recommendations and Telcordia GR-1089 Port Type 2 and 4 requirements. 600VAC interrupt products are designed to help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 and 5 requirements. RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 261 261 8/3/13 10:41 AM Agency Recognition for PolySwitch Telecommunications and Networking Devices UL CSA TUV File # E74889 File # 78165C Per IEC60730-1 Table T7 Certificate # for individual products available upon request. Recommended Pad Layouts for Surface-mount PolySwitch Telecommunications and Networking Devices in Millimeters (Inches) Nominal Device TS250 (All) A 4.60 (0.180) 2.29 (0.090) 3.60 (0.140) 10.42 (0.410) 5.20 (0.205) TSV250 (All) TSL250 (All) TS600 (All) TSM600 (All) B 1.80 (0.070) 2.41 (0.095) 1.80 (0.070) 3.30 (0.130) 17.80 (0.701) Figure T18 C 6.10 (0.240) 6.35 (0.250) 5.50 (0.220) 3.35 (0.132) 5.54 (0.218) D -- -- 3.43 (0.135) -- -- -- -- 6.75 (0.266) E -- -- -- -- -- -- -- -- 2.08 (0.082) F -- -- -- -- -- -- -- -- 3.12 (0.123) Figure T19 G -- -- -- -- -- -- -- -- 8.39 (0.331) Figure T18 T19 T18 T18 T20 Figure T20 B A A A D A B B C E G B F C B C D Solder Reflow and Rework Recommendations for PolySwitch Telecommunications Surface-Mount Devices 11 Pb-Free Assembly 3C/s max Figure T21 tp Critical Zone TL to Tp Tp Ramp Up 150C 200C 60-180 s 217C 60-150 s 260C TL Temperature Profile Feature Average ramp up rate (TsMAX to Tp) Preheat * Temperature min (TsMIN) * Temperature max (TsMAX) * Time (tsMIN to tsMAX) Time maintained above: * Temperature (TL) * Time (tL) Peak/Classification temperature (Tp) Time within 5C of actual peak temperature Time (tp) Ramp down rate Time 25C to peak temperature tL TsMAX TsMIN ts Preheat 25 20-40 s 6C/s max 8min max Reflow Profile Ramp Down t 25C to Peak Time Note: All temperatures refer to topside of the package, measured on the package body surface. Solder Reflow * Recommended reflow method: IR, vapor phase oven, hot air oven. * Surface-mount devices are not intended to be wave soldered to the bottom side of the board. * Recommended maximum paste thickness of 0.25mm (0.010in). * Devices can be cleaned using standard industry methods and solvents. Rework * If a device is removed from the board, it should be discarded and replaced with a new device. 262 RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 262 8/3/13 10:41 AM Figure T22 300 10s 250 245C ... 260C Temperature (C) Recommended Wave Soldering * Soldering temperature profile Temperature characteristic at component terminal with dual wave soldering Rework * If a device is removed from the board, it should be discarded and replaced with a new device 200 150 100 100C ... 130C Forced cooling 50 0 0 50 100 150 200 Time (s) Table T8 TRF250/TRF600 Tape and Reel Specifications for PolySwitch Telecommunications and Networking Device TRF250/TRF600 devices are available in tape and reel packaging per EIA 468-B standard. See Figures T23 and T24 for details. Dimension Description EIA Mark IEC Mark Dimension (mm) Tolerance Carrier Tape Width W W 18 -0.5/+1.0 Hold Down Tape Width W4 W0 5 Min Top Distance between Tape Edges W6 W2 3 Max Sprocket Hole Position W5 W1 9 -0.5/+0.75 Sprocket Hole Diameter D0 D0 4 0.2 Abcissa to Plane (Straight Lead) H H 18.5 3.0 Abcissa to Plane (Kinked Lead)* H0 H0 16 -0.5/+0.6 Abcissa to Top H1 H1 32.2 Max Overall Width with Lead Protrusion -- C1 43.2 Max Overall Width without Lead Protrusion -- C2 42.5 Max Lead Protrusion L1 I1 1.0 Max Protrusion of Cut-out L L 11 Max Protrusion beyond Hold Down Tape I2 I2 Not Specified -- Sprocket Hole Pitch P0 P0 12.7 0.3 Device Pitch (TRF250 and TRF600-150) -- -- 12.7 -- Device Pitch (TRF600-160 - TRF600-400) -- -- 25.4 -- Pitch Tolerance -- -- 20 Consecutive 1 Max Tape Thickness t t 0.9 Tape Thickness with Splice* t1 -- 2.0 Max Splice Sprocket Hole Alignment -- -- 0 0.3 Body Lateral Deviation Dh Dh 0 1.0 Body Tape Plane Deviation Dp Dp 0 1.3 Lead Spacing Plane Deviation DP1 P1 0 0.7 F F 5.08 0.6 w2 w 56 Max a d 370 Max Lead Spacing* Reel Width Reel Diameter w1 -- 4.75 3.25 Arbor Hole Diameter Space between Flanges Less Device c f 26 12.0 Core Diameter n h 80 Max Box -- -- 56/372/372 Max Consecutive Missing Pieces* -- -- 3 Max -- Empty Places per Reel* -- -- Not Specified -- 250 PolySwitch Resettable Devices - Telecommunications & Networking Devices Wave Soldering and Rework Recommendations for PolySwitch Telecommunications Radial-Leaded Devices 11 * Differs from EIA specification. RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 263 263 8/3/13 10:41 AM Figure T23 EIA Referenced Taped Component Dimensions for PolySwitch Telecommunications Radial-Leaded Devices Dp Dh Dh Dp Reference Plane H1 P1 H1 F A L H0 B W4 C2 C1 H W5 W I2 L1 P0 D0 Direction of Unreeling Cross section A-B t Figure T24 Reel Dimensions for PolySwitch Telecommunications Radial-Leaded Devices Reel Upper Side n Tape a c w1 Direction of Unreeling Lower Side Cross Section w2 Optional Shape: Circular or Polygonal 11 264 RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 264 8/3/13 10:41 AM TS Tape and Reel Specifications for PolySwitchTelecommunications and Networking Devices TS devices are packaged per EIA 481 and EIA 481-2 standards. See Figures T25 and T26 for details. TS250/TSL250/TSV250 Dimension Description EIA Mark TS250 Dimension (mm) Tolerance (mm) TSV250 Dimension (mm) Tolerance (mm) TSL250 Dimension (mm) Tolerance (mm) Carrier Tape Width W 16 0.30 16.0 0.30 16 0.30 Sprocket Hole Pitch P0 4.0 0.10 4.0 0.10 4.0 0.10 P1 12.0 0.10 8.0 0.10 8.0 0.10 P2 2.0 0.10 2.0 0.10 2.0 0.10 A0 6.9 0.23 5.5 0.10 5.5 0.10 B0 9.6 0.15 6.2 0.10 7.9 0.10 B1 max 12.1 -- 8.0 -- 9.2 -- D0 1.5 -0/+0.1 1.55 0.05 1.55 0.05 Sprocket Hole Diameter F 7.5 0.10 7.5 0.10 7.5 0.10 E1 1.75 0.10 1.75 0.10 1.75 0.10 E2 min 14.25 -- -- -- -- -- Tape Thickness T max 0.4 -- 0.45 -- 0.35 -- Tape Thickness With T1 max 0.1 -- 0.1 -- 0.1 -- K0 3.4 0.15 7.0 0.10 3.70 0.10 Splice Cover Tape Thickness Leader min 300 -- 390 -- 390 -- Trailer min 300 -- 160 -- 160 -- Reel Diameter A max 340 -- 340 -- 340 -- Core Diameter N min 50 -- 50 -- 50 -- W1 16.4 -0/+2.0 16.4 -0/+2.0 16.4 -0/+2.0 W2 max 22.4 -- 22.4 -- 22.4 -- Reel Dimensions Space between Flanges-less Device Reel Width TS600 Dimension Description EIA Mark Dimension (mm) Tolerance Carrier Tape Width W 32 0.3 Sprocket Hole Pitch P0 4.0 0.1 P1 16 0.1 P2 2.0 0.1 A0 10 0.1 B0 19.2 0.1 B1 max 21.6 Sprocket Hole Diameter D0 1.5 -0/+1.0 F 14.2 0.1 E1 1.75 0.1 E2 min 28.4 0.1 Tape Thickness T max 0.50 0.5 Tape Thickness with Splice T1 max 0.1 K0 13.2 Leader min 390 Trailer min 160 Reel Diameter A max 360 Core Diameter N min 50 W1 32.4 W2 max 40 PolySwitch Resettable Devices - Telecommunications & Networking Devices Table T9 11 0.1 Reel Dimensions Space between Flanges-less Device Reel Width RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 265 -0/+2.0 265 8/3/13 10:41 AM Table T9 TS Tape and Reel Specifications for PolySwitch Telecommunications and Networking Devices Cont'd TS devices are packaged per EIA 481 and EIA 481-2 standards. See Figures T25 and T26 for details. TSM600 Dimension Description EIA Mark Dimension (mm) Tolerance Carrier Tape Width W 32 0.3 Sprocket Hole Pitch P0 4.0 0.1 P1 24 0.1 P2 2.0 0.1 A0 11.2 0.1 B0 17.8 0.1 B1 max 23.45 Sprocket Hole Diameter D 1.5 -0/+1.0 F 14.2 0.1 E1 1.74 0.1 E2 max 28.4 0.1 0.5 Tape Thickness T max 0.5 Tape Thickness with Splice T1 max 0.1 K0 11.9 Leader min 390 Trailer min 160 Reel Diameter A max 360 Core Diameter N min 50 W1 32.4 W2 max 40 0.1 Reel Dimensions Space between Flanges-less Device Reel Width Figure T25 -0/+2.0 EIA Referenced Taped Component Dimensions for PolySwitch Telecommunications and Networking Devices P0 D0 T Embossment P2 E1 Cover Tape A0 B1 F W E2 K0 B0 T1 P1 Center Lines of Cavity Figure T26 11 EIA Referenced Reel Dimensions for PolySwitch Telecommunications and Networking Devices W2 (Measured at Hub) Cover Tape A N (Hub Dia.) W1 (Measured at Hub) Carrier Tape Embossed Cavity 266 RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 266 8/3/13 10:41 AM Most TCF, TRF and TS devices are available in resistance-sorted and/or resistance-matched versions. Resistance-sorted Devices Resistance-sorted devices (part number suffix "Rx", where x = 1, 2, A, B, C, F, etc.) are supplied with resistance values that are within specified segments of the device's full range of resistance. Feature * Narrow resistance range. Benefits * Can help provide greater flexibility for design engineers. * Lower resistance devices can help provide increased loop length on line card designs. * Higher resistance devices may help provide greater protection by offering faster time-to-trip. Resistance-matched Devices Resistance-matched devices are supplied such that all parts in one particular package (or reel) are within 0.5 of each other (1.0 for TRF250-080T devices). Individual matched packages are supplied from the full resistance range of the specified device. Feature * Tighter resistance balance between any two parts in a package. Benefits * Resistance-matched devices may help reduce the tip-ring resistance differential, reducing the possibility of line imbalance. Part Numbering System for PolySwitch Radial-Leaded Telecommunications and Networking Devices TRF*250 -120 T -RA -B-0.5 -2 Packaging 2 = Tape and Reel 0.130 = Special Lead Length in Inches (Blank) = Bulk B-x.x = Resistance Matched in Bins of x.x (Optional) Rx = Resistance Range (Optional) PolySwitch Resettable Devices - Telecommunications & Networking Devices PolySwitch Telecommunications and Networking Resistance-Sorted and Resistance-Matched Devices Modifier (Optional) U = Uncoated S = Straight Lead T = Fast Trip Device Hold Current (mA) Product Series (TRF250, TRF600) * F = RoHS compliant, ELV compliant Part Numbering System for PolySwitch Surface-mount Telecommunications and Networking Devices 11 TSx -200 F -RA -B-0.5 -2 Packaging 2 = Tape and Reel (Blank) = Bulk B-x.x = Resistance Matched in Bins of x.x (Optional) Rx = Resistance Range (Optional) F = RoHS Compliant, ELV Compliant Hold Current (mA) Product Series (TS250, TSV250, TSL250, TS600, TSM600) RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 267 267 8/3/13 10:41 AM Part Numbering System for Chip PolySwitch Telecommunications and Networking Devices TCF*250 -120 T -RA -B-0.5 B-x.x = Resistance Matched in Bins of x.x (Optional) Rx = Resistance Range (Optional) Modifier (Optional) T = Fast Trip Device Hold Current (mA) Product Series * F = RoHS compliant, ELV compliant Warning : * Users should independently evaluate the suitability of and test each product selected for their own application. * Operation beyond the maximum ratings or improper use may result in device damage and possible electrical arcing and flame. * These devices are intended for protection against damage caused by occasional overcurrent or overtemperature fault conditions and should not be used when repeated fault conditions or prolonged trip events are anticipated. * Contamination of the PPTC material with certain silicone-based oils or some aggressive solvents can adversely impact the performance of the devices. * Device performance can be impacted negatively if devices are handled in a manner inconsistent with recommended electronic, thermal and mechanical procedures for electronic components. * PPTC devices are not recommended for installation in applications where the device is constrained such that its PTC properties are inhibited, for example in rigid potting materials or in rigid housings, which lack adequate clearance to accommodate device expansion. * Operation in circuits with a large inductance can generate a circuit voltage (Ldi/dt) above the rated voltage of the device. 11 268 RoHS Compliant, ELV Compliant 2013_CP_S11-Poly-8-TeleNetwork.indd 268 8/3/13 10:41 AM Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: TSV250-184F