3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Wiremount Socket
.100″ × .200″ for .050″ Pitch Cable 3000 Series
Physical
Electrical
Environmental
*"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury,
hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by
3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
Insulation
Material: Glass Filled Polyester (PBT)
Flammability: UL 94V-0
Color: Gray
Contact
Material: Copper Alloy
J-Clip Material: Stainless Steel
Plating:
Underplating and U-Slot: 100 μ″ [ 2.54 μm ] Nickel
Wiping Area: 30 μ″ [ 0.76 μm ] Gold
Wire Accommodation: 26 and 28 AWG Stranded
Marking: 3M Logo, Part Identification Number, and Orientation Triangle
Current Rating: 1 A
Insulation Resistance: > 1 × 109Ω at 500 VDC
Withstanding Voltage: 1000 VRMS at Sea Level
Temperature Rating: -55°C to +105°C
TS-0097-B
Sheet 1 of 4
• Available in 20, 26, 34, 40 and 50 position
• Keying pinless shroud provides polarization
• Keying plug 3497-1 allows keying without pin
loss
• Positive locking metal ‘‘J'' clip provides high
cover retention
• Optional strain relief and pull tab
• Retainer clips add up to 20 pounds pin retention
for the pin shroud
• Pin shroud corner stops ensure proper pin height
for mating socket
• Optional polarizing key 3518 provides
polarization of socket connectors
• RoHS* compliant
Date Modified:January 25, 2011
UL File No.: E68080
DISCONTINUED 01/25/2011
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Wiremount Socket
.100″ × .200″ for .050″ Pitch Cable 3000 Series
Contact
Quantity 3M Part Number Dimensions Keying Slots
Provided
Socket Strain Relief A B C Ref
20 3575-0000 3448-30 1.18
[ 30.0 ]
1.06
[ 26.9 ]
1.0
[ 25 ]
4
26 3501-0000 3448-28 1.48
[ 37.6 ]
1.36
[ 34.5 ]
1.3
[ 33 ]
6
34 3310-0000 3448-29 1.88
[ 47.8 ]
1.76
[ 44.7 ]
1.7
[ 43 ]
8
40 3318-0000 3448-27 2.18
[ 55.4 ]
2.06
[ 52.3 ]
2.0
[ 51 ]
9
50 3307-0000 3448-17 2.68
[ 68.1 ]
2.56
[ 65.0 ]
2.5
[ 64 ]
12
TS-0097-B
Sheet 2 of 4
Ordering Information
Assembly tools: 3M™Press 3640 (or equivalent), 3M™Locator Plate 3443-94, 3M™Platen 3442-9.
Strain Relief
3448-XX
3M Part Number:
See Table
Sockets
XXXX-0000
Socket Series: See Table for 3M Part Number
Pos 1
Notes:
1. These holes accept 3M Keying Plug 3497-1 for
keying the socket connector without pin loss.
2. Guide holes for Pinless Shroud.
3. Order Pinless Shroud separately.
.075 ± .010
[ 1.91 ]
Material:
Nickel Plated Steel Music
Wire, ∅ .043 [ 1.09 ]
Material:
Gray Extruded
Polyvinyl Chloride
.620 ± .025
[ 15.75 ]
Non-Conductive Transfer
Adhesive with Liner
.050 Typ
[ 1.27 ]
B
.050 Typ
[ 1.27 ]
See Note 2
.04
[ 1.0 ]
.150
[ 3.81 ]
.200 Typ
[ 5.08 ]
See Note 1 and Table
See Note 2
.34 Ref
[ 8.64 ]
.200
[ 5.08 ]
2X .08
[ 2.03 ]
Triangle Indicates
Position No. 1
.100 Typ
[ 2.54 ]
A
.26
[ 6.60 ]
3497-1
.16
[ 4.1 ]
.17
[ 4.3 ]
.15
[ 3.8 ]
NO. XXXX
A
.34
[ 8.6 ]
Optional Strain Relief 3M Part No. 3448-XX
C
Optional Keying Plug
3M Part No. 3497-1
.0 .00 .000
inch ±.1 ±.01 ±.005
[ ] Dim ensions for Reference
Onl
y
Tolerance Unless Noted
[m m ]
Inch
.100
[ 2.54 ]
Material: Gray Polyester (PBT)
Pos 2
DISCONTINUED 01/25/2011
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Wiremount Socket
.100″ × .200″ Shroud For Keying Wiremount Socket 3000 Series
Contact
Quantity 3M Part
Number Dimension A Keying Bumps
Provided
20 3670 1.18
[ 30.0 ]
4
26 3556 1.48
[ 37.6 ]
6
34 3321 1.88
[ 47.8 ]
8
40 3396 2.18
[ 55.4 ]
9
50 3404 2.68
[ 68.1 ]
12
.15
[ 3.8 ] .34 Ref
[ 8.6 ]
.02
[ 0.5 ]
.09
[ 2.3 ]
TS-0097-B
Sheet 3 of 4
Pinless Shroud
XXXX
3M Part Number:
See Table
Retainer Clip
3619 Polarizing Keys
3518
Ordering Information
Notes:
1. Accepts .025 ± .001 [ 0.64 ] Square Post.
2. Notches will accomodate 3M Polarizing Key 3518.
3. Provides Keying without pin loss.
4. Retainer Clips (3M Part No. 3619) snaps on the two opposing corners for retention to pins.
5. Two corner pins act as stand-offs to control pin length for mating socket.
ABC
Pinless Shroud
A
.100 Typ
[ 2.54 ] See Note 3 .200
[ 5.08 ]
Position No. 1
.100
[ 2.54 ]
Retainer Clip - 3M Part No. 3619
.09
[ 2.3 ]
.16 Ref
[ 4.1 ]
See Note 2
.19 Ref
[ 4.8 ]
See Note 6
See Note 4
See Note 5
and Table A
A
See Note 1
Triangle Indicates
Position No. 1
.04
[ 1.0 ]
.400
[ 10.16 ]
.237
[ 6.02 ]
(See Note 7)
Section
A-A
.29
[ 7.4 ]
Optional
Polarizing Key
3M Part No. 3518
Breakaway Tab
3518
Material: .010 [0.25] Stainless Steel
Material: Gray Polyester (PBT)
Position No. 2
Material: Gray Polyester (PBT)
DISCONTINUED 01/25/2011
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Wiremount Socket
.100″ × .200″ for .050″ Recommended Board Pin Pattern 3000 Series
TS-0097-B
Sheet 4 of 4
Notes:
1. Measured at tip.
2. Tapered Pin Tip configuration recommended.
3. Pinless Shroud base thickness; When the Header Retainer Clip is used, the
minimum overall pin length is .36″ [9.14 ].
See Note 2
.018 Max
[ 0.46 ]
.170 Min
[ 4.32 ]
.04 (See Note 3)
[ 1.02 ]
.40 Min
[10.2]
.30 Min
[7.6]
.100
[2.54]
.200
[5.08]
.20 Min
[5.1]
.15
[3.8]
- B -
Space for Cable Exit
Space Occupied by Socket
.025 ± .001
[0.64] Square or Round Typ
(See Note 1)
.025 AB
- A -
DISCONTINUED 01/25/2011
3
Printed in USA.
Minimum 10%
Post-Consumer Fiber
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product. Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/electronics © 3M 2007
DISCONTINUED 01/25/2011
