MC100EL11DT - ON SEMICONDUCTOR

LVR

www.vishay.com Vishay Dale

Revision: 15-Nov-17 1Document Number: 30206

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Wirewound Resistors, Precision Power, Low Value, Commercial,

Axial Lead

DESIGN SUPPORT TOOLS

FEATURES

• Ideal for all types of current sensing

applications including switching and linear

power supplies, instruments and power

amplifiers

• Excellent load life stability

• Low temperature coefficient

• Low inductance

• MIL-PRF-49465 qualified, type RLV resistors

can be found at: www.vishay.com/doc?30283

• Material categorization:

for definitions of compliance please see

www.vishay.com/doc?99912

Note

This datasheet provides information about parts that are



RoHS-compliant and / or parts that are non RoHS-compliant. For



example, parts with lead (Pb) terminations are not RoHS-compliant.



Please see the information / tables in this datasheet for details

Notes

(1) Resistance is measured 3/8" [9.52 mm] from the body of the resistor, or at 1.183" [30.05 mm], 1.315" [33.40 mm], 1.675" [42.545 mm] or

2.575" [65.405 mm] spacing for the LVR01, LVR03, LVR05 and LVR10 respectively

(2) LVR01: Standard resistance values are 0.01 , 0.015 , 0.02 , 0.025 , 0.03 , 0.033 , 0.04 , 0.05 , 0.051 , 0.06 , 0.068 ,

0.07 , 0.08 , 0.09  and 0.1  with 1 % tolerance. Other resistance values may be available upon request

click logo to get started

Available

Models

Available

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL

MODEL

HISTORICAL

MODEL

POWER RATING

P25 °C W

RESISTANCE

RANGE (1)



TOLERANCE

± % TECHNOLOGY

WEIGHT

(typical)

LVR01 LVR-1 1 0.01 to 0.1 (2) 1, 3, 5, 10 Metal strip 0.5

LVR03 LVR-3 3 0.005 to 0.2 1, 3, 5, 10 Metal strip 2

LVR05 LVR-5 5 0.005 to 0.3 1, 3, 5, 10 Metal strip 5

LVR10 LVR-10 10 0.01 to 0.8 1, 3, 5, 10 Coil spacewound 11

TECHNICAL SPECIFICATIONS

PARAMETER UNIT LVR01 LVR03 LVR05 LVR10

Operating Temperature Range °C -65 to +175 -65 to +275

Dielectric Withstanding Voltage VAC 1000 1000 1000 1000

Insulation Resistance 10 000 M minimum dry

Short Time Overload - 5 x rated power for 5 s 10 x rated power for 5 s

Terminal Strength

(minimum) lb5 101010

Maximum Working Voltage V (P x R)1/2

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: LVR055L000FS73 (visit www.vishay.net Vishay Dale parts numbering manual for all options)

GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL

LVR01

LVR03

LVR05

LVR10

R = decimal

L = m

(values < 0.010 )

R1500 = 0.15 

7L000 = 0.007

D = ± 0.5 %

F = ± 1.0 %

G = ± 2.0 %

H = ± 3.0 %

J = ± 5.0 %

K = ± 10.0 %

E12 = lead (Pb)-free bulk

E03 = lead (Pb)-free lacer pack (LVR10)

E70 = lead (Pb)-free, tape / reel 1000 pieces (LVR01, 03)

E73 = lead (Pb)-free, tape / reel 500 pieces

(dash number)

(up to 3 digits)

From 1 to 999

as applicable

B12 = tin / lead bulk

L03 = tin / lead lacer pack (LVR10)

S70 = tin / lead, tape / reel 1000 pieces (LVR01, 03)

S73 = tin / lead, tape/reel 500 pieces

VR055L000FS7 3L

LVR

www.vishay.com Vishay Dale

Revision: 15-Nov-17 2Document Number: 30206

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS in inches [millimeters]

Note

(1) On some standard reel pack methods, the leads may be trimmed to a shorter length than shown

MATERIAL SPECIFICATIONS

Element: Self-supporting nickel-chrome alloy (LVR10 also

utilizes manganin)

Encapsulation: High temperature mold compound

Terminals: Tinned copper

Part Marking: Dale, model, wattage, value, tolerance, date

code

Packaging: Reference “Wirewound Through Hole Resistor

Packaging” (www.vishay.com/doc?21028)

DERATING

1.50 [38.10] (1)

minimum

MODEL

DIMENSIONS in inches [millimeters]

± 0.010 [0.254]

± 0.002 [0.051]

LVR01 0.427 [10.85] 0.115 [2.92] 0.020 [0.508]

LVR03 0.560 [14.22] 0.205 [5.21] 0.032 [0.813]

LVR05 0.925 [23.50] 0.330 [8.38] 0.040 [1.02]

LVR10 1.828 [46.43] 0.392 [9.96] 0.040 [1.02]

- 65 - 25 25 75 125 175 225 275

AMBIENT TEMPERATURE IN °C

120

100

% N I R E W O P D

T A R

LVR01

LVR03

LVR05

LVR10

TEMPERATURE COEFFICIENT (ppm/°C)

LVR01 LVR03 LVR05 LVR10

± 1000 for 0.01  to 0.0249 

± 400 for 0.025  to 0.0499 

± 300 for 0.05  to 0.0749 

± 250 for 0.075  to 0.099 

± 150 for 0.1  to 0.1 

± 850 for 0.005  to 0.0099 

± 350 for 0.01  to 0.0249 

± 200 for 0.025  to 0.0499 

± 125 for 0.05  to 0.0749 

± 75 for 0.075  to 0.099 

± 50 for 0.1  to 0.2 

± 650 for 0.005  to 0.0099 

± 250 for 0.01  to 0.0249 

± 150 for 0.025  to 0.0499 

± 100 for 0.05  to 0.0749 

± 75 for 0.075  to 0.099 

± 50 for 0.1  to 0.3 

± 300 for 0.01  to 0.0249 

± 150 for 0.025  to 0.0499 

± 125 for 0.05  to 0.0749 

± 100 for 0.075  to 0.099 

± 50 for 0.1  to 0.8 

PERFORMANCE

TEST CONDITIONS OF TEST TEST LIMITS

Thermal Shock -65 °C to +125 °C, 5 cycles, 15 min at each extreme ± (0.2 % + 0.0005 ) R

Short Time Overload 5x rated power (LVR01, 03, 05), 10 x rated power (LVR10) for 5 s ± (0.5 % + 0.0005 ) R

Low Temperature Storage -65 °C for 24 h ± (0.2 % + 0.0005 ) R

High Temperature Exposure 250 h at +275 °C (+175 °C for LVR01) ± (2.0 % + 0.0005 ) R

Dielectric Withstanding Voltage 1000 VRMS, 1 min ± (0.1 % + 0.0005 ) R

Insulation Resistance MIL-STD-202 Method 302, 100 V 1000 M minimum

Moisture Resistance MIL-STD-202 Method 106, 7b not applicable ± (0.2 % + 0.0005 ) R

Shock, Specified Pulse MIL-STD-202 Method 213, 100 g's for 6 ms, 10 shocks ± (0.1 % + 0.0005 ) R

Vibration, High Frequency Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each ± (0.1 % + 0.0005 ) R

Load Life 2000 h at rated power, +25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (2.0 % + 0.0005 ) R

Bias Humidity +85 °C, 85 % RH, 10 % bias, 1000 h ± (1.0 % + 0.0005 ) R

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.