126195-2 - TE Connectivity Aerospace, Defense and Marine

Catalog 1308940 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514

Revised 5-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967

AMPLIMITE Connectors, Series 90

5127

Pin and Socket Connectors

Series 90 Connectors

All Series 90 AMPLIMITE military connectors conform to the latest amendments of military

specification MIL-DTL-24308. For more detailed information, refer to MIL-DTL-24308.

All Series 90 connectors are designed for a -67°F to 257°F [-55°C to +125°C]

temperature range.

The following is a list of technical documents that cover the application and performance of

AMPLIMITE Series 90 military connectors, contacts, tooling and accessories.

Military Specifications

MIL-DTL-24308 Connectors, Electric, Rectangular, Miniature Polarized Shell, Rack and

Panel, General Specifications for

MIL-C-39029 Contacts, Electrical Connector, General Specification for

NASA Specification

GSFC-S-311-P-4 Non-Magnetic Connectors, General Specification for

AMP Instruction Sheets

408-7516 AMP Application Tooling for MIL-C-39029 Contacts

408-7610 Application and Maintenance for AMP Hand Crimping Tool 90294-1

408-7508 AMP Insertion/Extraction Tools 91067-1, 91067-2 and 91067-3

408-7837 AMP Female Screwlock Kit 205817-8 and AMP Male Screw/Retainer

Kit 211883-5

Performance Specifications

Technical Documents List

15 Position, Shell Size 1

MS 18273-2 26 Position, Shell Size 2

MS 18274-2

44 Position, Shell Size 3

MS 18275-2

62 Position, Shell Size 4

MS 18276-2

78 Position, Shell Size 5

MS 18277-2

104 Position, Shell Size 6

MS 14004-1

Insert Arrangements

Note: Mating face of plug shown: receptacle is mirror image.

Catalog 1308940 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514

Revised 5-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967

AMPLIMITE Connectors, Series 90

5128

Size 22 Crimp Contacts for Series 90 Connectors (MIL-C-39029)

M39029/58-360

(Supersedes M24308/13-1)

Socket

M39029/57-354

(Supersedes M24308/12-1)

Size 22 Crimp, Snap-In

Contacts .030 [0.76]

Pin Diameter

Material and Finish

Pin, Socket Body — Copper alloy,

plated gold over nickel underplate

Socket Hood — Passivated stainless

steel

Wire Size Tape Mounted Loose Piece

Range Ins. Dia. Contact Contacts1Contacts Hand Tool Contact

(Max.) Configuration AMP Military AMP Tool No. Positioner No. Color Bands

AWG [mm2]Part No. Part No. Part No. (M22520/) (M22520/)

(M39029/)

22-28 0.4-0.8 .054 Pin 204370-5 58-360 204370-2 02-01 02-09 orange, blue, black

1.38 Socket 204351-2 57-354 204351-1 02-01 02-06 orange, green, yellow

1Tape mounted contacts are used in the AMP-TAPEMATIC Stripper/Crimper Machine Part Number 599406-7 (page 5142).

Notes: 1. These contacts are used in Series 90 military connectors.

2. Insertion/Extraction Tool Part Number 91067-1 (Military Part Number M81969/1-04) is used to install and remove pin and socket contacts.

3. See AMP Instruction Sheet 408-7516 for wire length, tool and selector settings.

4. Color bands are read in the direction of terminal (wire barrel) end to mating end.

Size 22 Crimp Contacts for Series 90 Connectors (Industrial Grade)

Size 22 Crimp, Snap-In

Contacts .030 [0.76]

Pin Diameter

Material and Finish

Pin Body — Copper alloy with

.000050–.000100 [0.00127–0.00254]

gold plate over .000050–.000150

[0.00127–0.00381] nickel underplate

Wire Size Tape Mounted Loose Piece Hand Tool

Range Ins. Dia. Contact Contacts1Contacts Tool No. Positioner No.

AWG [mm2](Max.) Configuration Part No. Part No. (M22520/) (M22520/)

22-28 0.4-0.8 .054 Pin 1218699-2 1218699-1 02-01 02-09

1.38 Socket — — — —

1Tape mounted contacts are used in the AMP-TAPEMATIC Stripper/Crimper Machine Part Number 599406-7 (page 5142).

Notes: 1. These contacts are used in Series 90 connectors.

2. Insertion/Extraction Tool Part Number 91067-1 (Military Part Number M81969/1-04) is used to install and

remove pin and socket contacts.

3. See AMP Instruction Sheet 408-7516 for wire length, tool and selector settings.

Catalog 1308940 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514

Revised 5-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967

AMPLIMITE Connectors, Series 90

5129

Pin and Socket Connectors

Size 22 Posted Contacts for Series 90 Connectors

Size 22 Posted Contacts

Material and Finish

Pin and Socket Body — Leaded nickel

copper or beryllium copper

Socket Hood — See chart below

(See drawing No. 207683

for latest configurations)

Socket

(See drawing No. 207684

for latest configurations)

Post Post Part Nos. Contact Socket Hood

Diameter Extension Pin Socket Plating Material and Finish

± .002 [± .050] C ± .025 [± 0.63]

.175 207683-6 207684-3 Pin Socket

4.45 .000050–.000100 .000050–.000100 Brass or Beryllium copper with

[0.00127–0.00254] [0.00127–0.00254] .000050–.000100 [0.00127–0.00254]

.018 .275 207683-2 207684-1 thick gold plate over thick gold plate over thick gold plate over

0.46 6.99 .000100–.000150 .000100–.000250 .000100–.000250 [0.00254–0.00635]

.525 207683-4 207684-2 [0.00254–0.00381] [0.00254–0.00635] thick copper underplate

13.34 thick copper underplate thick copper underplate

.000050–.000100 [0.00127–0.00254]

.025 .275 207683-8 207684-4 thick gold plate over

0.64 6.99 .000050–.000150 [0.00127–0.00381] Passivated Stainless Steel

thick nickel underplate

.275 —207684-5 .000050–.000100 [0.00127–0.00254]

6.99 thick gold plate over

.525 207683-9 —.000050–.000150 [0.00127–0.00381] Passivated Stainless Steel

.018 13.34 thick nickel underplate

0.46 .000050–.000100 [0.00127–0.00254]

.175 1-207683-1 —thick gold plate over

4.45 .000200–.000250 [0.00508–0.00635] —

thick nickel underplate

AMP Part Number 91067-1 or

MIL Part Number M81969/1-04

Insertion tip, for replacement

Part Number 126237-1

Extraction tip, for replacement

Part Number 126195-2

Pin and Socket

Insertion/Extraction Tool

Post extension when used in a standard connector

.375

[9.53]

Ref.

Max.

Notes:

1. Contacts on this page can be used

with connectors on pages 5130-

5134, 5140. See page 5145 for

PCB layouts.

2. Mating End of pin and socket

complies with MIL-C-39029.

Catalog 1308940 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514

Revised 5-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967

AMPLIMITE Connectors, Series 90

5130

Crimp Plugs, Series 90, High Density Connectors

(MIL Qualified)

Material and Finish

Shell — Steel, cadmium plated

Insert — Approved material per

MIL-DTL-24308

Retention Clips — Stainless steel

or copper alloy

(Industrial Grade)

Material and Finish

Shell — Steel, zinc plated

Insert — Polyphenylene Sulfide (PPS)

Retention Clips — Stainless steel or

copper alloy

Related Product Data

Cavity Identification — page 5127

Contacts — pages 5128, 5129

Mounting, Mating Dimensions —

page 5143

Accessories — pages 5148-5150

Attention: MIL Qualified

Connector marking

Connector marking may differ from

package marking. All connectors marked

per MIL-DTL-24308.

MIL Qualified

No. of Standard Mount Floating Industrial

Contact Dimensions Bushing Mount Description Grade3

Pos. ABCDFGHJKLMilitary AMP Military AMP Standard

(Shell Part No.2Part No. Part No. Part No. Mount

Size) M24308/ M24308/ Part No.

15 .666 .329 .984 1.213 .235 .759 .494 .422 .030 .422 4-264F 204501-1 4-329F 204525-1 Plug only 1218746-1

(1) 16.92 8.36 24.99 30.81 5.97 19.28 12.55 10.72 0.76 10.72 4-11F 204513-2 4-307F 204537-2 Plug with pins1—

26 .994 .329 1.312 1.541 .235 1.083 .494 .422 .030 .422 4-265F 204503-1 4-330F 204527-1 Plug only 1218746-2

(2) 25.25 8.36 33.32 39.14 5.97 27.51 12.55 10.72 0.76 10.72 4-12F 204515-2 4-308F 204539-2 Plug with pins1—

44 1.534 .329 1.852 2.088 .230 1.625 .494 .422 .039 .426 4-266F 204505-1 4-331F 204529-1 Plug only 1218746-3

(3) 38.96 8.36 47.04 53.04 5.84 4.13 12.55 10.72 0.99 10.82 4-13F 204517-2 4-309F 204541-2 Plug with pins1—

62 2.182 .329 2.500 2.729 .230 2.272 .494 .422 .039 .426 4-267F 204507-1 4-332F 204531-1 Plug only 1218746-4

(4) 55.42 8.36 63.5 69.32 5.84 57.7 12.55 10.72 0.99 10.82 4-14F 204519-2 4-310F 204543-2 Plug with pins1—

78 2.079 .441 2.406 2.635 .230 2.178 .605 .534 .039 .426 4-268F 204509-1 4-333F 204533-1 Plug only 1218746-5

(5) 52.81 11.2 61.11 66.93 5.84 55.32 15.37 13.56 0.99 10.82 4-15F 204521-2 4-311F 204545-2 Plug with pins1—

104 2.212 .503 2.500 2.729 .230 2.302 .668 .596 .039 .426 4-269F 204511-1 4-334F 204535-1 Plug only 1218746-6

(6) 56.18 12.78 63.5 69.32 5.84 58.47 16.97 15.14 0.99 10.82 4-16F 204523-2 4-312F 204547-2 Plug with pins1—

Notes: See pages 5151 through 5155 (military to AMP Part Number cross reference) for additional part numbers.

1Size 22 sockets supplied with receptacles are loose piece.

Notes: 2“F” is stamped on connectors following M24308 part number as required. “F” designates cadmium shell plating.

Notes: 3Meets requirements of MIL-DTL-24308.

Floating Bushing

Dual Mount

.070

[1.78] Max.

Mating Face

.086–.091

[2.18–2.31] Dia.

.031 ± .005

[0.79 ± 0.13]

.031 ± .005 [0.79 ± 0.13]

Float For Misalignment .008 ± .004

[0.2 ± 0.10]Overall

Free Float

Dia.

2 Holes

.375

[9.53]

Max.

.130

[3.30] Max.

A ± .005

[± 0.13]

(Inside)

B ± .005

[± 0.13]

(Inside)

C ± .005

[± 0.13]

F ± .006

[± 0.15]

D ± .015

[± 0.38]

H ± .015

[± 0.38]

K ± .010

[± 0.25]

G ± .010

[± 0.25]

.120 ± .005

[3.05 ± 0.13]

L ± .010

[± 0.25]

J ± .010

[± 0.25]

Catalog 1308940 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514

Revised 5-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967

AMPLIMITE Connectors, Series 90

5131

Pin and Socket Connectors

Crimp Receptacles, Series 90, High Density Connectors

(MIL Qualified)

Material and Finish

Shell — Steel, cadmium plated

Insert — Approved material per

MIL-DTL-24308

Retention Clips — Stainless steel or

copper alloy

(Industrial Grade)

Material and Finish

Shell — Steel, zinc plated

Insert — Polyphenylene Sulfide (PPS)

Retention Clips — Stainless steel or

copper alloy

Related Product Data

Cavity Identification — page 5127

Contacts — pages 5128, 5129

Mounting, Mating Dimensions —

page 5143

Accessories — pages 5148-5150

Attention: Connector marking

Connector marking may differ from

package marking. All connectors marked

per MIL-DTL-24308.

Floating Bushing

Dual Mount

.120±.005

[3.05±0.13]

.070

[1.78] Max. .130

[3.30] Max.

Mating Face

.086–.091

[2.18–2.31] Dia. .031 ± .005

[0.79 ± 0.13]

.031 ± .005 [0.79 ± 0.13]

Float For Misalignment .008 ± .004

[0.2 ± 0.10]Overall

Free Float

Dia.

2 Holes

.375

[9.53]

Max.

.243 ± .005

[6.17 ± 0.13]

.429 ± .010

[10.9 ± 0.25]

A ± .005

[± 0.13]

(Outside)

B ± .005

[± 0.13]

(Outside) C ± .005

[± 0.13]

D ± .015

[± 0.38]

H ± .010

[± 0.25]

E ± .010

[± 0.25]

F ± .015

[± 0.38] G ± .010

[± 0.25]

Clinch Nut Mount

MIL Qualified

No. of Standard Mount Floating Industrial

Contact Dimensions Bushing Mount Description Grade3

Pos. ABCDEFGHMilitary AMP Military AMP Clinch Nut

(Shell Part No.2Part No. Part No. Part No. Mount

Size) M24308/ M24308/ Part No.

15 .643 .311 .984 1.213 .759 .494 .422 .030 2-286F 204500-1 2-297F 204524-1 Recept. only 1218747-1

(1) 16.33 7.9 24.99 30.81 19.28 12.55 10.72 0.76 2-11F 204512-2 2-28F 204536-2 Recept. with sockets1—

26 .971 .311 1.312 1.541 1.083 .494 .422 .030 2-287F 204502-1 2-298F 204526-1 Recept. only 1218747-2

(2) 24.66 7.9 33.32 39.14 27.51 12.55 10.72 0.76 2-12F 204514-2 2-29F 204538-2 Recept. with sockets1—

44 1.511 .311 1.852 2.088 1.625 .494 .422 .039 2-288F 204504-1 2-299F 204528-1 Recept. only 1218747-3

(3) 38.38 7.9 47.04 53.04 41.3 12.55 10.72 0.99 2-13F 204516-2 2-30F 204540-2 Recept. with sockets1—

62 2.159 .311 2.500 2.729 2.272 494 .422 .039 2-289F 204506-1 2-300F 204530-1 Recept. only 1218747-4

(4) 54.84 8.36 63.5 69.32 57.7 12.55 10.72 0.99 2-14F 204518-2 2-31F 204542-2 Recept. with sockets1—

78 2.064 .423 2.406 2.635 2.178 .605 .534 .039 2-290F 204508-1 2-301F 204532-1 Recept. only 1218747-5

(5) 52.43 10.74 61.11 66.93 55.32 15.37 13.56 0.99 2-15F 204520-2 2-32F 204544-2 Recept. with sockets1—

104 2.189 .485 2.500 2.729 2.302 .668 .596 .039 2-291F 204510-1 2-302F 204534-1 Recept. only 1218747-6

(6) 55.6 12.32 63.5 69.32 58.47 16.97 15.14 0.99 2-16F 204522-2 2-33F 204546-2 Recept. with sockets1—

Notes: See pages 5151 through 5155 (military to AMP Part Number cross reference) for additional part numbers.

1Size 22 sockets supplied with receptacles are loose piece.

Notes: 2“F” is stamped on connectors following M24308 part number as required. “F” designates cadmium shell plating.

Notes: 3Meets requirements of MIL-DTL-24308.

Catalog 1308940 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514

Revised 5-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967

AMPLIMITE Connectors, Series 90

5132

Non-Magnetic Crimp Plugs, Series 90, High Density Connectors

(NASA Qualified)

Connector Material and Finish

Shell — Brass, gold plated

Insert — Approved material per

MIL-DTL-24308

Retention Clips — Copper alloy

Related Product Data

Cavity Identification — page 5127

Mounting, Mating Specifications —

page 5143

Accessories — pages 5148-5150

Max. insulation diameter .054 [1.38]

Hand tool AMP Part Number 601966-1

or MIL Part Number M22520/2-01

Positioner AMP Part Number 601966-6

or MIL Part Number M22520/2-09

Wire Size AMP Part No. /

Range NASA No.

22-28 204370-8

0.4-0.08 G-08-P1

26-28 206495-3

0.15-0.08 —

Pin and Socket

Insertion/Extraction Tool

AMP Part Number 91067-1 or

MIL Part Number M81969/1-04

Insertion tip, for replacement

Part Number 126237-1

Extraction tip, for replacement

Part Number 126195-2

Non-Magnetic Plugs per NASA Specification

No. of

Contact Dimensions NASA AMP

Pos. ABCDFGHJLK No. Part No.

(Shell

Size) .154 311P407-1P-B-15 206498-1

15 .666 .329 .984 1.213 .235 .759 .494 .422 .422 3.91

(1) 16.92 8.36 24.99 30.81 5.97 19.28 12.55 10.72 10.72 .120 311P407-1P-B-12 206498-4

3.05

.154 311P407-2P-B-15 206500-1

26 .994 .329 1.312 1.541 .235 1.083 .494 .422 .422 3.91

(2) 25.25 8.36 33.32 39.14 5.97 27.51 12.55 10.72 10.72 .120 311P407-2P-B-12 206500-4

3.05

.154 311P407-3P-B-15 206063-2

44 1.534 .329 1.852 2.088 .230 1.625 .494 .422 .426 3.91

(3) 38.96 8.36 47.04 53.04 5.84 4.13 12.55 10.72 10.82 .120 311P407-3P-B-12 206063-4

3.05

.154 311P407-4P-B-15 206502-1

62 2.182 .329 2.500 2.729 .230 2.272 .494 .422 .426 3.91

(4) 55.42 8.36 63.5 69.32 5.84 57.7 12.55 10.72 10.82 .120 311P407-4P-B-12 206502-4

3.05

.154 311P407-5P-B-15 206504-1

78 2.079 .441 2.406 2.635 .230 2.178 .605 .534 .426 3.91

(5) 52.81 11.20 61.11 66.93 5.84 57.7 15.37 13.56 10.82 .120 311P407-5P-B-12 206504-4

3.05

.154 311P407-6P-B-15 206066-2

104 2.212 .503 2.500 2.729 .230 2.302 .668 .596 .426 3.91

(6) 56.18 12.78 63.5 69.32 5.84 58.47 16.97 15.14 10.82 .120 311P407-6P-B-12 206066-4

3.05

Non-Magnetic Plugs With Silicone Rubber Rear Grommet1

No. of

Contact Dimensions AMP

Pos. ABCDFGHJKL Part No.

(Shell

Size)

15 .666 .329 .984 1.213 .235 .759 .494 .422 .120 .422 211673-4

(1) 16.92 8.36 24.99 30.81 5.97 19.28 12.55 10.72 3.05 10.72

26 .994 .329 1.312 1.541 .235 1.083 .494 .422 .120 .422 211674-4

(2) 25.25 8.36 33.32 39.14 5.97 27.51 12.55 10.72 3.05 10.72

44 1.534 .329 1.852 2.088 .230 1.625 .494 .422 .120 .426 211675-4

(3) 38.96 8.36 47.04 53.04 5.84 41.3 12.55 10.72 3.05 10.82

62 2.182 .329 2.500 2.729 .230 2.272 .494 .422 .120 .426 211676-4

(4) 55.42 8.36 63.5 69.32 5.84 57.7 12.55 10.72 3.05 10.82

78 2.079 .441 2.406 2.635 .230 2.178 .605 .534 .120 .426 211677-4

(5) 52.81 11.20 61.11 66.93 5.84 55.32 15.37 13.56 3.05 10.82

104 2.212 .503 2.500 2.729 .230 2.302 .668 .596 .120 .426 211678-4

(6) 56.18 12.78 63.5 69.32 5.84 58.47 16.97 15.14 3.05 10.82

1Grommet provided for cable strain relief.

.125

[3.18]

Dia.

2 Holes

.070

[1.78] Max.

Mating Face

.375

[9.53]

Max.

A ± .005

[± 0.13]

(Inside)

B ± .005

[± 0.13]

(Inside) C ± .005

[± 0.13]

F ± .006

[± 0.15]

D ± .015

[± 0.38]

H ± .015

[± 0.38]

G ± .010

[± 0.25]

L ± .010

[± 0.25]

J ± .010

[± 0.25]

K ± .005

[± 0.13]

Grommet style only

Ref.

Contact Material and Finish

Copper alloy, .000050–.000100

[0.00127–0.0254] thick gold plate over

.000100–.000150 [0.0254–0.00381]

thick copper underplate

Catalog 1308940 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514

Revised 5-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967

AMPLIMITE Connectors, Series 90

5133

Pin and Socket Connectors

Non-Magnetic Crimp Receptacles, Series 90, High Density Connectors

(NASA Qualified)

Connector Material and Finish

Shell — Brass, gold plated

Insert — Approved material per

MIL-DTL-24308

Retention Clips — Copper alloy

Related Product Data

Cavity Identification — page 5127

Mounting, Mating Specifications —

page 5143

Accessories — pages 5148-5150

Max. insulation diameter .054 [1.38]

Hand tool AMP Part Number 601966-1

or MIL Part Number M22520/2-01

Positioner AMP Part Number 601966-4

or MIL Part Number M22520/2-06

Contact and Hood Material

and Finish

Copper alloy, .000050–.000100

[0.00127–0.0254] thick gold plate over

.000100–.000150 [0.0254–0.00381]

thick copper underplate

Wire Size AMP Part No. /

Range NASA No.

22-28 206071-1

0.4-0.08 G-08-S1

26-28 206496-1

0.15-0.08 —

Pin and Socket

Insertion/Extraction Tool

AMP Part Number 91067-1 or

MIL Part Number M81969/1-04

Insertion tip, for replacement

Part Number 126237-1

Extraction tip, for replacement

Part Number 126195-2

Socket Non-Magnetic Receptacles per NASA Specification

No. of

Contact Dimensions NASA AMP

Pos. ABCDEFGJ No. Part No.

(Shell

Size) .154 311P407-1S-B-15 206499-1

15 .643 .311 .984 1.213 .759 .494 .422 3.91

(1) 16.33 7.9 24.99 30.81 19.28 12.55 10.72 .120 311P407-1S-B-12 206499-4

3.05

.154 311P407-2S-B-15 206501-1

26 .971 .311 1.312 1.541 1.083 .494 .422 3.91

(2) 24.66 7.9 33.32 39.14 27.51 12.55 10.72 .120 311P407-2S-B-12 206501-4

3.05

.154 311P407-3S-B-15 206064-2

44 1.511 .311 1.852 2.088 1.625 .494 .422 3.91

(3) 38.38 7.9 47.04 53.04 41.3 12.55 10.72 .120 311P407-3S-B-12 206064-4

3.05

.154 311P407-4S-B-15 206503-1

62 2.159 .311 2.500 2.729 2.272 .494 .422 3.91

(4) 54.84 7.9 63.5 69.32 57.7 12.55 10.72 .120 311P407-4S-B-12 206503-4

3.05

.154 311P407-5S-B-15 206505-1

78 2.064 .423 2.406 2.635 2.178 .605 .534 3.91

(5) 52.43 10.74 61.11 66.93 55.32 15.37 13.56 .120 311P407-5S-B-12 206505-4

3.05

.154 311P407-6S-B-15 206065-2

104 2.189 .485 2.500 2.729 2.302 668 .596 3.91

(6) 55.6 12.32 63.5 69.32 58.47 16.97 15.14 .120 311P407-6S-B-12 206065-4

3.05

Non-Magnetic Receptacles With Silicone Rubber Rear Grommet1

No. of

Contact Dimensions AMP

Pos. ABCDEFGJ Part No.

(Shell

Size)

15 .643 .311 .984 1.213 .759 .494 .422 .120 211667-4

(1) 16.33 7.9 24.99 30.81 19.28 12.55 10.72 3.05

26 .971 .311 1.312 1.541 1.083 .494 .422 .120 211668-4

(2) 24.66 7.9 33.32 39.14 27.51 12.55 10.72 3.05

44 1.511 .311 1.852 2.088 1.625 .494 .422 .120 211669-4

(3) 38.38 7.9 47.04 53.04 41.3 12.55 10.72 3.05

62 2.159 .311 2.500 2.729 2.272 .494 .422 .120 .211670-4

(4) 54.84 7.9 63.5 69.32 57.7 12.55 10.72 3.05

78 2.064 .423 2.406 2.635 2.178 .605 .534 .120 211671-4

(5) 52.43 10.74 61.11 66.93 55.32 15.37 13.56 3.05

104 2.189 .485 2.500 2.729 2.302 .668 .596 .120 211672-4

(6) 55.6 12.32 63.5 69.32 58.47 16.97 15.14 3.05

1Grommet provided for cable strain relief.

.070

[1.78] Max.

Mating Face

.375

[9.53]

Max.

.125

[3.18]

.243 ± .005

[6.17 ± 0.13]

Dia.

2 Holes

.429 ± .010

[10.90 ± 0.25]

A ± .005

[± 0.13]

(Outside)

B ± .005

[± 0.13]

(Outside) C ± .005

[± 0.13] D ± .015

[± 0.38]

E ± .010

[± 0.25] G ± .010

[± 0.25]

F ± .015

[± 0.38]

J ± .005

[± 0.13]

Ref.

Grommet style only

Catalog 1308940 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514

Revised 5-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967

AMPLIMITE Connectors, Series 90

5134

Crimp Blindmate Plugs, Series 90, High Density Connectors

Material and Finish

Shell, Front — Aluminum alloy, cad-

mium plated with yellow chromate

Shell, Rear — Steel, cadmium plated

with yellow chromate

Insert Assembly — Approved materi-

al per MIL-DTL-24308

Retention Clips — Stainless steel

Related Product Data

Cavity Identification — page 5127

Contacts — pages 5128, 5129

Mounting Specifications —

page 5143

Flange to flange spacing can be a max.

of .270 [6.86] for Blindmate connectors.

No. of

Contact Dimensions AMP

Pos. ABCD E F G HPart No.

(Shell

Size)

15 .656 .324 .984 1.224 .769/.750 .506 .432/.413 .257

(1) 16.66 8.23 24.99 31.09 19.53/19.05 12.85 10.97/10.49 6.53 213153-1

26 .984 .324 1.312 1.552 1.093/1.074 .506 .432/.413 .257

(2) 25.0 8.23 33.32 39.42 27.76/27.28 12.85 10.97/10.49 6.53 445010-1

44 1.524 .324 1.852 2.099 1.635/1.616 .506 .432/.413 .257

(3) 38.71 8.23 47.04 53.31 41.53/41.05 12.85 10.97/10.49 6.53 445011-1

62 2.172 .324 2.500 2.740 2.282/2.263 .506 .432/.413 .257

(4) 55.17 8.23 63.5 69.6 57.96/57.48 12.85 10.97/10.49 6.53 213118-1

78 2.082 .444 2.406 2.646 2.188/2.167 .617 .544/.525 .257

(5) 52.88 11.28 61.11 67.21 55.58/55.04 15.67 13.82/13.34 6.53 445012-1

104 2.212 .503 2.500 2.740 2.302 .680 .606/.587 .267

(6) 56.18 12.78 63.5 69.6 58.47 17.27 15.39/14.91 6.78 212933-3

Catalog 1308940 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514

Revised 5-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967

AMPLIMITE Connectors, Series 90

5135

Pin and Socket Connectors

Straight PCB, Series 90, High Density Connectors (Industrial Grade)

Material and Finish

Shell — Steel, cadmium plated

Insert — Polyphenylene Sulfide (PPS)

Retention Clips — Stainless steel

Related Product Data

Cavity Identification — page 5127

Contacts — page 5129

Mounting, Mating Dimensions —

page 5143

Accessories — pages 5148-5150

PCB Layouts — See page 5145 or

AMP customer drawing

Replacement Pin Contact

Part Number 207683-8

Replacement Socket Contact

Part Number 207684-4

Plugs

No. of

Contact Dimensions AMP

Pos. A BCDFGHJK Part No.

(Shell (Inside) (Inside)

Size)

15 .666 .329 .984 1.213 .235 .759 .494 .422 .422 208866-1

(1) 16.92 8.36 24.99 30.81 5.97 19.28 12.55 10.72 10.72

26 .994 .329 1.312 1.541 .235 1.083 .494 .422 .422 208867-1

(2) 25.25 8.36 33.32 39.14 5.97 27.51 12.55 10.72 10.72

44 1.534 .329 1.852 2.088 .230 1.625 .494 .422 .426 208868-1

(3) 38.96 8.36 47.04 53.04 5.84 41.3 12.55 10.72 10.82

62 2.182 .329 2.500 2.729 .230 2.272 .494 .422 .426 208869-1

(4) 55.42 8.36 63.5 69.32 5.84 57.7 12.55 10.72 10.82

78 2.079 .441 2.406 2.635 .230 2.178 .605 .534 .426 208870-1

(5) 52.81 11.20 61.11 66.93 5.84 55.32 15.37 13.56 10.82

104 2.212 .503 2.500 2.729 .230 2.302 .668 .596 .426 208871-1

(6) 56.18 12.78 63.5 69.32 5.84 58.47 16.97 15.14 10.82

Receptacles

No. of

Contact Dimensions AMP

Pos. A BCDFGHJK Part No.

(Shell (Outside) (Outside)

Size)

15 .643 .311 .984 1.213 .243 .759 .494 .422 .429 208872-1

(1) 16.33 7.9 24.99 30.81 6.17 19.28 12.55 10.72 10.9

26 .971 .311 1.312 1.541 .243 1.083 .494 .422 .429 208873-1

(2) 24.66 7.9 33.32 39.14 6.17 27.51 12.55 10.72 10.9

44 1.511 .311 1.852 2.088 .243 1.625 .494 .422 .429 208874-1

(3) 38.38 7.9 47.04 53.04 6.17 41.3 12.55 10.72 10.9

62 2.159 .311 2.500 2.729 .243 2.272 .494 .422 .429 208875-1

(4) 54.84 7.9 63.5 69.32 6.17 57.7 12.55 10.72 10.9

78 2.064 .423 2.406 2.635 .243 2.178 .605 .534 .429 208876-1

(5) 52.43 10.74 61.11 66.93 6.17 55.32 15.37 13.56 10.9

104 2.189 .485 2.500 2.729 .243 2.302 .668 .596 .429 208877-1

(6) 55.6 12.32 63.5 69.32 6.17 58.47 16.97 15.14 10.9

F ± .006 [0.15] (Plug)

± .005 [0.13] (Rcpt)

Catalog 1308940 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514

Revised 5-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967

AMPLIMITE Connectors, Series 90

5136

Right-Angle PCB, Series 90, with Female Screwlocks

Material and Finish

Shell — Brass, gold over copper plated

Insert — Diallyl phthalate or polyester

or Polyphenylene Sulfide (PPS)

Shell Size 1 thru 4

Plugs

No. of

Contact Dimensions AMP

Pos. Part No.

(Shell ABCDEFGJ

Size)

15 1.213 .666 .984 .329 .494 .422 .246 ±.010 1.204 1-593326-7

(1) 30.81 16.92 24.99 8.36 12.55 10.72 6.25 ±0.25 30.58

26 1.541 .994 1.312 .329 .494 .422 .246 ±.010 1.532 1-593326-8

(2) 39.14 25.25 33.32 8.36 12.55 10.72 6.25 ±0.25 38.91

44 2.088 1.534 1.852 .329 .494 .426 .246 ±.010 2.077 1-593326-9

(3) 53.04 38.96 47.04 8.36 12.55 10.82 6.25 ±0.25 52.76

62 2.729 2.182 2.500 .329 .494 .426 .246 ±.010 2.720 2-593326-0

(4) 69.32 55.42 63.50 8.36 12.55 10.82 6.25 ±0.25 69.09

78 2.635 2.079 2.406 .441 .605 .426 .246 ±.010 2.626 2-593326-1

(5) 66.93 52.81 61.11 11.20 15.37 10.82 6.25 ±0.25 66.70

104 2.729 2.213 2.500 .503 .668 .426 .246 ±.010 2.720 2-593326-2

(6) 69.32 56.21 63.50 12.78 16.97 10.82 6.25 ±0.25 69.09

Receptacles

No. of

Contact Dimensions AMP

Pos. Part No.

(Shell ABCDEFGJ

Size)

15 1.213 .643 .984 .311 .494 .422 .248 ±.010 1.204 1-593327-7

(1) 30.81 16.33 24.99 7.90 12.55 10.72 6.30 ±0.25 30.58

26 1.541 .971 1.312 .311 .494 .422 .248 ±.010 1.532 1-593327-8

(2) 39.14 24.66 33.32 7.90 12.55 10.72 6.30 ±0.25 38.91

44 2.088 1.511 1.852 .311 .494 .426 .248 ±.010 2.077 1-593327-9

(3) 53.04 38.38 47.04 7.90 12.55 10.82 6.30 ±0.25 52.76

62 2.729 2.159 2.500 .311 .494 .426 .248 ±.010 2.720 2-593327-0

(4) 69.32 54.84 63.50 7.90 12.55 10.82 6.30 ±0.25 69.09

78 2.635 2.064 2.406 .423 .605 .426 .248 ±.010 2.626 2-593327-1

(5) 66.93 52.43 61.11 10.74 15.37 10.82 6.30 ±0.25 66.70

104 2.729 2.188 2.500 .485 .668 .426 .248 ±.010 2.726 2-593327-2

(6) 69.32 55.58 63.50 12.32 16.97 10.82 6.30 ±0.25 69.24

Position 1

(Receptacle)

.020 ± .003

[0.51 ± 0.08]

G.062

[1.57] Ref.

L of

Mounting

Hole

.670 ± .010

[17.02 ± 0.25]

.606 ± .010

[15.39 ± 0.25]

.528 ± .010

[13.41 ± 0.25]

.150 ± .025

[3.81 ± 0.64]

.450 ± .010

[11.43 ± 0.25]

Catalog 1308940 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514

Revised 5-03 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967

AMPLIMITE Connectors, Series 90

5137

Pin and Socket Connectors

Connector Savers, Series 90, High Density Connectors

Connector savers prolong

the life of permanently

installed connectors which

would otherwise be subject-

ed to repeated cycles of

mating and unmating, in

applications such as test

interfaces or on testing

devices.

Material and Finish

Standard

Shell — Steel, cadmium plated

Contact Body — Beryllium copper,

.000050 [0.00127] min. gold plate

over .000050 [0.00127] min. nickel

underplate

Socket Hood — Passivated

stainless steel

Insert — Polyphenylene Sulfide

(PPS)

Spacer — Black nylon

Non Magnetic

Shell — Brass, gold plated

Contact Body — Beryllium copper,

.000050 [0.00127] min. gold plate

over .000050 [0.00127] min. copper

underplate

Socket Hood — Brass, .000050

[0.00127] min. gold plate over

.000100 [0.00254] min. copper

underplate

Insert — Polyphenylene Sulfide

(PPS)

Spacer — Black nylon

Dimensions

ABCDEFGH

(Outside) (Outside) (Inside) (Inside)

.643 .311 .984 1.213 .666 .494 .329 .235

16.33 7.9 24.99 30.81 16.92 12.55 8.36 5.97

.971 .311 1.312 1.541 .994 .494 .329 .235

24.66 7.9 33.32 39.14 25.25 12.55 8.36 5.97

1.511 .311 1.852 2.088 1.534 .494 .329 .230

38.38 7.9 47.04 53.04 38.96 12.55 8.36 5.84

2.159 .311 2.500 2.729 2.182 .494 .329 .230

54.84 7.9 63.5 69.32 55.42 12.55 8.36 5.84

2.064 .423 2.406 2.635 2.079 .605 .441 .230

52.43 10.74 61.11 66.93 52.81 15.37 11.20 5.84

2.189 .485 2.500 2.729 2.212 .668 .503 .230

55.60 12.32 63.5 69.32 56.18 16.97 12.78 5.84

No. of Standard Non-Magnetic

Contact (Cadmium (Gold Over

Pos. Over Steel) Brass)

(Shell Size)

15 211010-1 211010-4

(1)

26 211011-1 211011-4

(2)

44 211012-1 211012-4

(3)

62 211013-1 211013-4

(4)

78 211014-1 211014-4

(5)

104 211015-1 211015-4

(6)