02/11/2015 www.crouzet.com O 63 mm 33 and 67 Watts 67 W Part number 82830502 Long service life Usable power : 27 to 50 W For low-speed, high-power drive applications With 2 ball bearings Power supply via 2 output leads Part numbers 82830502 Type Type Voltage References 67 W 828305 24 V Without encoder Specifications No-load characteristics Speed of rotation (rpm) Absorbed power (W) Absorbed current (A) 3660 12 0,5 Nominal characteristics Speed (rpm) Torque (mNm) Usable power (W) Absorbed power (W) Absorbed current (A) Gearbox case temperature rise (C) Efficiency (%) 2770 170 50 72 3 50 69,4 General characteristics Insulation class (conforming to IEC 85) Protection (IEC/EN 60529) Max. output power (W) Start torque (mNm) Starting current (A) Resistance () Inductance (mH) Torque constant (Nm/A) Electrical time constant (ms) Mechanical time constant (ms) Thermal time constant (mn) F (155 C) IP20 67 700 11,8 2,03 4,68 0,0619 2,3 33 18 Inertia (g.cm2 ) Weight (g) Number of of segments Service life (h) Ball bearings Wires length (mm) 500 840 12 4000 200 Encoder characteristics Current consumption (mA) Output current (mA) Supply (V) Ambient temperature (C) 0,1515 < 20 (25 C) 4,535DC -25+85 Accessories Connection Code Pre-assembled female connector, casing 179228-3, tags 179227-1 and leads AWG24 250 mm 79209895 Made to order products, available on request Other supply voltages Shaft lengths at front and/or rear Built-in interference suppression Encoders Other fixing flanges on front and rear Short version possible (L = 90 mm) Dimensions (mm) Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected 02/11/2015 www.crouzet.com 82 830 0 - 82 830 5 without encoder No Legend 4 holes O 3.65 0.05 at 90 over O 48 4 holes M5 over O 40 mm depth 7 mm 4 holes M5 over O 40 mm depth 7 mm Curves 828305 No Legend rpm Torque/speed curve Curves 828305 Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected 02/11/2015 www.crouzet.com No Legend Torque/current curve Product adaptations Special output shaft Pinion on output shaft Special supply voltage Special cable length Special ball bearings Optical or Hall effect encoder - 1 or 2 channels - other resolutions Special mounting plate Special connectors EMC filter Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected