Ø 63 mm 33 and 67 Watts 67 W Part number 82830502
Long service life
Usable power : 27 to 50 W
For low-speed, high-power drive applications
With 2 ball bearings
Power supply via 2 output leads
Part numbers
Type
Type
Voltage
82830502
67 W
828305
24 V
Specifications
No
-load characteristics
Speed of rotation (rpm)
3660
Absorbed power (W)
12
Absorbed current (A)
0,5
Nominal characteristics
Speed (rpm)
2770
Torque (mNm)
170
Usable power (W)
50
Absorbed power (W)
72
Absorbed current (A)
3
Gearbox case temperature rise (°C)
50
Efficiency (%)
69,4
General characteristics
Insulation class (conforming to IEC 85)
F (155 °C)
Protection (IEC/EN 60529)
IP20
Max. output power (W)
67
Start torque (mNm)
700
Starting current (A)
11,8
Resistance (
Ω
)
2,03
Inductance (mH)
4,68
Torque constant (Nm/A)
0,0619
Electrical time constant (ms)
2,3
Mechanical time constant (ms)
33
Thermal time constant (mn)
18
Inertia (g.cm
2 )
500
Weight (g)
840
Number of of segments
12
Service life (h)
4000
Ball bearings
Wires length (mm)
200
Encoder characteristics
Current consumption (mA)
0,15→15
Output current (mA)
< 20 (25 °C)
Supply (V)
4,5→35DC
Ambient temperature (°C)
-
25→+85
Accessories
Connection
Code
Pre
-assembled female connector, casing 179228-3, tags 179227-
1 and leads AWG24 250 mm
79209895
Made to order products, available on request
Other supply voltages
Shaft lengths at front and/or rear
Built
-in interference suppression
Encoders
Other fixing flanges on front and rear
Short version possible (L = 90 mm)
Dimensions (mm)
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
02/11/2015 www.crouzet.com
82 830 0 - 82 830 5 without encoder
N
o
Legend
4 holes Ø 3.65
±
0.05 at 90° over Ø 48
4 holes M5 over Ø 40 mm depth 7 mm
4 holes M5 over Ø 40 mm depth 7 mm
Curves
828305
N
o
Legend
rpm
Torque/speed curve
Curves
828305
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
02/11/2015 www.crouzet.com
N
o
Legend
Torque/current curve
Product adaptations
Special output shaft
Pinion on output shaft
Special supply voltage
Special cable length
Special ball bearings
Optical or Hall effect encoder - 1 or 2 channels - other resolutions
Special mounting plate
Special connectors
EMC filter
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
02/11/2015 www.crouzet.com