SPECIFICATION CONTROL DRAWING Product Revision Product Name oA min oB min oC min GA = WIRE GAUGE (AWG) Product Dimensions oD oE oF L1 min min min max L2 max K min AWG D-181-2220-90/9 F 20 D-181-2222-90/9 F 4.50 4.00 3.45 2.90 3.00 1.10 17.00 22.7 150 22 D-181-2224-90/9 F (0.180) (0.160) (0.135) (0.115) (0.120) (0.045) (0.670) (0.895) (5.900) 24 D-181-2226-90/9 F 26 MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. 3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: gray. 4. GROUND LEAD: Raychem 55A0111-GA-9 in accordance with MIL-W-22759/32, AWG GA (see table), stranded tin plated. Color: white 5. GROUND LEAD: Raychem 55A0111-GA-90 in accordance with MIL-W-22759/32, AWG GA (see table), stranded tin plated. Color: white with black stripe. APPLICATION 1. These parts are designed to provide an environment protected coaxial termination on cables, rated for 125C minimum, meeting the dimensional criteria listed, having a tin or silverplated copper shields. 2. Temperature range: -55C to +150C. Install using Raychem-approved convection or infrared heating tools in accordance with Raychem process standard RCPS-200-36. For best results, prepare the cable as shown: SolderSleeve is a trademark of Tyco Electronics Corporation. Tyco Electronics Corporation 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. TITLE: Raychem UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Tyco Electronics reserves the right to amend ANGLES: N/A TOLERANCES: this drawing at any time. Users should 0.00 N/A evaluate the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A DRAWN BY: CAGE CODE: REPLACES: DCR NUMBER: M. FORONDA 06090 D18122XX D981012 If this document is printed it becomes uncontrolled. Check for the latest revision. (c) 2004 Tyco Electronics Corporation. All rights reserved COAXIAL SOLDERSLEEVE DEVICE WITH PRE-INSTALLED LEAD DOCUMENT NO.: D-181-22GA-90/9 DATE: DOC ISSUE: 3 Jun. 15, 1998 PROD. REV.: SEE TABLE SCALE: None SIZE: A SHEET: 1 of 1