5000 W TRANSIENT VOLTAGE
SUPPRESSOR
WWW.Microsemi .COM
SCOTTSDALE DIVISION
5KP5.0 thru 5KP110CA, e3
5KP5.0 5KP110CA, e3
DESCRIPTION APPEARANCE
These Microsemi 5 kW Transient Voltage Suppressors (TVSs) are designed
for applications requiring protection of voltage-sensitive electronic devices
that may be damaged by harsh or severe voltage transients including
lightning per IEC61000-4-5 and classes with various source impedances
described herein. This series is available in 5.0 to 110 volt standoff voltages
(VWM) in both unidirectional and bidirectional offered in two different package
designs for axial and radial configurations. Microsemi also offers numerous
other TVS products to meet higher and lower power demands and special
applications.
CASE 5A
(DO-204AR)
CASE
5R
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES APPLIC ATIONS / BENE FITS
Available in both Unidirectional and Bidirectional
construction (Bidirectional with C or CA suffix)
Available in both axial-leaded and radial packages
(include R prefix in part number for radial package option
shown in figure as “case 5R,” e.g. R5KP5.0A)
Selections for 5.0 to 110 volts standoff voltages (VWM)
Suppresses transients up to 5000 watts @ 10/1000 µs
and 34,000 watts @ 8/20 µs (see Figure 1)
Optional 100% screening for avionics grade is
available by adding MA prefix to part number for added
100% temperature cycle -55oC to +125oC (10X) as well
as surge (3X) and 24 hours HTRB with post test VZ &
IR (in the operating direction for unidirectional or both
directions for bidirectional)
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, JANTXV, and JANS are also
available by adding MQ, MX, MV, or MSP prefixes
respectively to part numbers.
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
RoHS Compliant devices available by adding “e3” suffix
Protection from switching transients and induced RF
Fast response
Protection from ESD, and EFT per IEC 61000-4-2
and IEC 61000-4-4
Secondary lightning protection per IEC61000-4-5
with 42 Ohms source impedance:
Class 1,2,3,4: 5KP5.0A to 5KP110A or CA
Class 5: 5KP5.0A to 5KP110A or CA (short distance)
Class 5: 5KP5.0A to 5KP36A or CA (long distance)
Secondary lightning protection per IEC61000-4-5
with 12 Ohms source impedance:
Class 1 & 2: 5KP5.0A to 5KP110A or CA
Class 3: 5KP5.0A to 5KP78A or CA
Class 4: 5KP5.0A to 5KP40A or CA
Secondary lightning protection per IEC61000-4-5
with 2 Ohms source impedance:
Class 2: 5KP5.0A to 5KP70A or CA
Class 3: 5KP5.0 to 5KP36A or CA
Class 4: 5KP5.0 to 5KP18A or CA
MAXIMUM RAT ING S MECHANICAL AND PACKAGING
Peak Pulse Power dissipation at 25ºC: 5000 watts at
10/1000 μs (also see Figures 1 and 2)
Impulse repetition rate (duty factor): 0.05%
t
clamping (0 volts to V(BR) min.): < 100 ps theoretical for
unidirectional and < 5 ns for bidirectional
Operating and Storage temperature: -65ºC to +150ºC
Thermal resistance: 20ºC/W junction to lead, or 80ºC/W
junction to ambient when mounted on FR4 PC board
with 4 mm2 copper pads (1oz) and track width 1 mm,
length 25 mm
Steady-State Power dissipation: 6 watts at TL = 30oC,
or 1.56 watts at TA = 25ºC when mounted on FR4 PC
board described for thermal resistance
Forward Surge Voltage: 3.5 V maximum @ 100 Amps
8.3 ms half-sine wave (unidirectional devices only)
Solder temperatures: 260 ºC for 10 s (maximum)
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
TERMINALS: Tin-Lead or RoHS compliant
annealed matte-Tin plating readily solderable per
MIL-STD-750, method 2026
MARKING: Body marked with part number
POLARITY: Band denotes cathode for the axial-
leaded package and a dot denotes cathode terminal
for the radial package. Bidirectional not marked for
polarity
WEIGHT: 1.4 grams (approximate)
TAPE & Reel: Standard per EIA-296 for axial
package (add “TR” suffix to part number)
See package dimensions on last page
Microsemi
Scottsdale Division
Page 1
Copyright © 2006
3-10-2006 REV G
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
5000 W TRANSIENT VOLTAGE
SUPPRESSOR
WWW.Microsemi .COM
SCOTTSDALE DIVISION
5KP5.0 thru 5KP110CA, e3
5KP5.0 5KP110CA, e3
Microsemi
Scottsdale Division
Page 2
ELECTRICAL CHARACTERISTICS
MICROSEMI
PART
NUMBER
(Note 2)
REVERSE
STAND-OFF
VOLTAGE
VWM
(Note 1)
VOLTS
BREAKDOWN
VOLTAGE
V(BR)
V(BR) @ I(BR)
VOLTS mA
MAXIMUM
CLAMPING
VOLTAGE
VC
@ IPP
VOLTS
MAXIMUM
STANDBY
CURRENT
ID
@ VWM
μA
MAXIMUM
PEAK PULSE
CURRENT
IPP (FIG. 2)
A
MAXIMUM
TEMPERATURE
COEFFICIENT
OF V(BR)
αV(BR)
mV/ ºC
5KP5.0
5KP5.0A
5KP6.0
5KP6.0A
5.0
5.0
6.0
6.0
6.40 – 7.30
6.40 – 7.00
6.67 – 8.15
6.67 – 7.37
50
50
50
50
9.6
9.2
11.4
10.3
2000*
2000*
5000
5000
520
543
439
485
4.0
4.0
4.0
4.0
5KP6.5
5KP6.5A
5KP7.0
5KP7.0A
6.5
6.5
7.0
7.0
7.22 – 8.82
7.22 – 7.98
7.78 – 9.51
7.78 – 8.60
50
50
50
50
12.3
11.2
13.3
12.0
2000
2000
1000
1000
407
447
378
417
4.0
4.0
5.0
5.0
5KP7.5
5KP7.5A
5KP8.0
5KP8.0A
7.5
7.5
8.0
8.0
8.33 – 10.2
8.33 – 9.21
8.89 – 10.9
8.89 – 9.83
5
5
5
5
14.3
12.9
15.0
13.6
250
250
150
150
350
388
333
367
6.0
6.0
6.0
6.0
5KP8.5
5KP8.5A
5KP9.0
5KP9.0A
8.5
8.5
9.0
9.0
9.44 – 11.5
9.44 – 10.4
10.0 – 12.2
10.0 – 11.1
5
5
5
5
15.9
14.4
16.9
15.4
50
50
20
20
314
347
295
325
7.0
7.0
8.0
8.0
5KP10
5KP10A
5KP11
5KP11A
10
10
11
11
11.1 – 13.6
11.1 – 12.3
12.2 – 14.9
12.2 – 13.5
5
5
5
5
18.8
17.0
20.1
18.2
15
15
10
10
266
294
249
274
9.0
9.0
10
10
5KP12
5KP12A
5KP13
5KP13A
12
12
13
13
13.3 – 16.3
13.3 – 14.7
14.4 – 17.6
14.4 – 15.9
5
5
5
5
22.0
19.9
23.8
21.5
10
10
10
10
227
251
210
232
11
11
12
12
5KP14
5KP14A
5KP15
5KP15A
14
14
15
15
15.6 – 19.1
15.6 – 17.2
16.7 – 20.4
16.7 – 18.5
5
5
5
5
25.8
23.2
26.9
24.4
10
10
10
10
194
215
188
206
13
13
15
15
5KP16
5KP16A
5KP17
5KP17A
16
16
17
17
17.8 – 21.8
17.8 – 19.7
18.9 – 23.1
18.9 – 20.9
5
5
5
5
28.8
26.0
30.5
27.6
10
10
10
10
176
192
164
181
18
16
19
18
5KP18
5KP18A
5KP20
5KP20A
18
18
20
20
20.0 – 24.4
20.0 – 22.1
22.2 – 27.1
22.2 – 24.5
5
5
5
5
32.2
29.2
35.8
32.4
10
10
10
10
155
172
139
154
20
19
24
22
5KP22
5KP22A
5KP24
5KP24A
22
22
24
24
24.4 – 29.8
24.4 – 26.9
26.7 – 32.6
26.7 – 29.5
5
5
5
5
39.4
35.5
43.0
38.9
10
10
10
10
127
141
116
128
27
24
30
27
5KP26
5KP26A
5KP28
5KP28A
26
26
28
28
28.9 – 35.3
28.9 – 31.9
31.1 – 38.0
31.1 – 34.4
5
5
5
5
46.6
42.1
50.1
45.5
10
10
10
10
107
119
99
110
33
29
34
30
5KP30
5KP30A
5KP33
5KP33A
30
30
33
33
33.3 – 40.7
33.3 – 36.8
36.7 – 44.9
36.7 – 40.6
5
5
5
5
53.5
48.4
59.0
53.3
10
10
10
10
93
103
85
94
38
35
41
38
5KP36
5KP36A
5KP40
5KP40A
36
36
40
40
40.0 – 48.9
40.0 – 44.2
44.4 – 54.3
44.4 – 49.1
5
5
5
5
64.3
58.1
71.4
64.5
10
10
10
10
78
86
70
78
45
40
50
45
5KP43
5KP43A
5KP45
5KP45A
43
43
45
45
47.8 – 58.4
47.8 – 52.8
50.0 – 61.1
50.0 – 55.3
5
5
5
5
46.7
69.4
80.3
72.7
10
10
10
10
65
72
62
69
54
49
57
51
5KP48
5KP48A
5KP51
5KP51A
48
48
51
51
53.3 – 65.1
53.3 – 58.9
56.7 – 69.3
56.7 – 62.7
5
5
5
5
85.5
77.4
91.1
82.4
10
10
10
10
58
65
55
61
62
55
65
60
Copyright © 2006
3-10-2006 REV G
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
5000 W TRANSIENT VOLTAGE
SUPPRESSOR
WWW.Microsemi .COM
SCOTTSDALE DIVISION
5KP5.0 thru 5KP110CA, e3
5KP5.0 5KP110CA, e3
MICROSEMI
PART
NUMBER
(Note 2)
REVERSE
STAND-OFF
VOLTAGE
VWM
(Note 1)
VOLTS
BREAKDOWN
VOLTAGE
V(BR)
V(BR) @ I(BR)
VOLTS mA
MAXIMUM
CLAMPING
VOLTAGE
VC
@ IPP
VOLTS
MAXIMUM
STANDBY
CURRENT
ID
@ VWM
μA
MAXIMUM
PEAK PULSE
CURRENT
IPP (FIG. 2)
A
MAXIMUM
TEMPERATURE
COEFFICIENT
OF V(BR)
αV(BR)
mV/ ºC
5KP54
5KP54A
5KP58
5KP58A
54
54
58
58
60.0 – 73.3
60.0 – 66.3
64.4 – 78.7
64.4 – 71.2
5
5
5
5
96.3
87.1
103.0
93.6
10
10
10
10
52
57
49
53
70
64
77
69
5KP60
5KP60A
5KP64
5KP64A
60
60
64
64
66.7 – 81.5
66.7 – 73.7
71.1 – 86.9
71.1 – 78.6
5
5
5
5
107.0
96.8
114.0
103.0
10
10
10
10
47
52
44
49
79
70
85
75
5KP70
5KP70A
5KP75
5KP75A
70
70
75
75
77.8 – 95.1
77.8 – 86.0
83.3 – 102.0
83.3 – 92.1
5
5
5
5
125
113
134
121
10
10
10
10
40
44
37
41
93
84
100
90
5KP78
5KP78A
5KP85
5KP85A
78
78
85
85
86.7 – 106.0
86.7 – 95.8
94.4 – 115.0
94.4 – 104.0
5
5
5
5
139
126
151
137
10
10
10
10
36
40
33
36
104
94
113
102
5KP90
5KP90A
5KP100
5KP100A
90
90
100
100
100 – 122
100 – 111
111 – 136
111 – 123
5
5
5
5
160
146
179
162
10
10
10
10
31
34
28
31
120
109
134
122
5KP110
5KP110A
110
110
122 – 149
122 - 135
5
5
196
177
10
10
26
28
147
132
NOTE 1: Transient Voltage Suppressors are normally selected with reverse “Stand Off Voltage” VWM which should
be equal to or greater than the dc or continuous peak operating voltage level.
NOTE 2: For bidirectional construction, indicate a C or CA suffix after the part number.
* For the 5KP5.0C and 5KP5.0CA double the ID Maximum Standby Current to 4000 µA
SYMBOLS & DEFINITI ONS
Symbol Definition Symbol Definition
VWM Working Peak (Standoff) Voltage IPP Peak Pulse Current
PPP Peak Pulse Power VCClamping Voltage
V(BR) Breakdown Voltage I(BR) Breakdown Current for V(BR)
ID Standby Current
Microsemi
Scottsdale Division
Page 3
Copyright © 2006
3-10-2006 REV G
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
5000 W TRANSIENT VOLTAGE
SUPPRESSOR
WWW.Microsemi .COM
SCOTTSDALE DIVISION
5KP5.0 thru 5KP110CA, e3
5KP5.0 5KP110CA, e3
GRAPHS
PPP Peak Pulse Power - kW
tp – Pulse Time – sec Test waveform parameters: tr=10 μs, tp=1000 μs
FIGURE 1 FIGURE 2
Peak Pulse Power vs. Pulse Time to 50% of Pulse Waveform
Exponentially Decaying Pulse
PACKAGE DIMEN SIONS
CASE 5A CASE 5R
Microsemi
Scottsdale Division
Page 4
Copyright © 2006
3-10-2006 REV G
V
(BR) Breakdown Voltage - Volts
FIGURE 3
Typical Capacitance vs
Breakdown Voltage
NOTE: Dimensions are in inches.
C – Capacitance – pico farads
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503