Du line
®
Fieldbus Installationbus
Specifications are subject to change without notice (06.09.2006) 1
Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group
Type: Dupline®
OPUS housing
Input type
4 channels
4 inputs
Colour/input type
Supply
Ordering KeyProduct Description
G82864406703 is a 4-channel
transceiver with 4 contact
inputs and 4 LEDs for indica-
tion of received signal from
the G34860058230 base. It
can be used alone or integrat-
ed in the OPUS-66 series
from the Danish supplier LK.
The light switch is part of the
Dupline®“Smart House”
building automation concept
and can be used to control
lights, roller blinds/Venetian
blinds and other functions
supported by the master gen-
erator.
• Dupline transmitter for building automation applications
• 4 individually programmable push-button inputs
• Channel programming using GAP 1605
• Wall mounting
• Range up to 100 m in open air
• 3 V battery supply (CR2032)
• Battery life: up to 5 years at normal use
Type Selection
Input Specifications
Wireless push-button
Transmission frequency 868 MHz
Supply Specifications
Power supply Battery: CR2023
OPUS wireless light switch
Type G8286 4406 703
General Specifications
Channel coding Via GAP 1605 and special
cable: GAP-TPH-CAB
Out 1-4 Push-button 1-4
Housing (LK OPUS)
Environment
Protection degree IP 20
Pollution degree 3 (IEC 60664)
Operating temperature 0-50°C/32-122°F
Storage temperature -20-70°C/-4-158°F
Humidity
(non-condensing) 20 - 80%
Weight 50 g – without battery
Dimensions 66 x 66 x 11 mm
(including frame)
Supply Colour Ordering no.
Dupline®White G 8286 4406 703
Light grey G 8286 4408 703
G 8286 4406 703
Mode of Operation
The G8286 440x 703 light
switch is designed for base
unit G3486 0058 230 and will
only function with this unit.
The wireless G8286 440x 703
light switches are pro-
grammed as standard light
switches G8x10 44xx using a
GAP1605 (see data sheet for
this unit).
The communication between
G8286 440x 703 light switches
and the G3486 0058 230
base is established in the fol-
lowing way:
- Push the “Mode” button on
the G3486 0058 230 base
until the red LED indicates
association.
- Push the push-button on the
G8286 440x 703 light switch
module that you want to
associate with the G3486
0058 230 base.
Once the association is com-
plete, all 4 LEDs will light up
briefly (approx. 1 second).
If the association fails, e.g.
because the range is exceed-
ed, all LEDs in the light switch
module will light up simulta-
neously for approx. 500 ms.
This also occurs if, under nor-
mal circumstances, it is not
possible to establish connec-
tion between the G3486 0058
230 base and the G8286 440x
703 light switch modules.
It is possible to disable the
communication between the
G3486 0058 230 base and all
the modules with which it is
associated.
- Push the “Mode” button on
the G3486 0058 230 base
until the red “Disable” LED is
lit.
This means that there is no
connection between the
G3486 0058 230 base and its
associations.
To reestablish the connection,
push “Mode” until neither
“Associate” or “Deactivate”
are lit.
Under normal circumstances,
the “Supply” and “Dupline”
LEDs will be lit continuously,
whereas the LED for “Com-
munication” only blinks briefly
when you push an associated
G8286 440x 703 light switch.
The LEDs always follow their
allocated push-button and
cannot be programmed indi-
vidually or removed.
The LED indication provides
confirmation that the commu-
nication is successful.
Du line
®
Fieldbus Installationbus
2Specifications are subject to change without notice (06.09.2006)
Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group
66
66
11 13
Dimensions
I1 I3
I2 I4
Push-button/LED allocation
Figure 1
Programming cable
for GAP 1605 GAP-TPH-CAB
Accessories
Communication Example
G82864406703
G81864407703
Mode
I1
I2
I3
I4
I1
I3
I2
I4
Max.
100 m
868 MHz
G34860058230G3800XXXX
Dupline®
1 2 1 2
Power
Dupline®
RF
Associate
Disable
