MEMORY CARD CONNECTORS (PCMCIA CONFORMABLE) 560H SERIES FEATURES * The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer Memory Card International Association (PCMCIA) standards Ver. 4. * Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.). Incorrect insertion is prevented. Hot system plugging is possible (contact detection). * Plugs have an easy-to-use ejection mechanism. * Raised mounting type connectors (under which components can be mounted) and low-profile connectors are available. * In addition to connectors for type I and type II cards, a connector for type III cards has been provided. * The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided mounting are available. PIN CONNECTOR (PLUG) CONTACT LENGTH SPECIFICATIONS Contact type Specification Item Pin No. Contact length Operating temperature range - 55C to + 85C Power, ground pins 1, 17, 34, 35, 51, 68 Current rating DC 0.5 A Card detection pins 36, 67 3.5 mm (0.137 in.) Voltage rating AC 250 V Other signal pins Others 4.25 mm (0.167 in.) Contact resistance 40 m max (6 VDC, 0.1 A) Insulation resistance 1000 M min. (500 VDC) Dielectric withstanding voltage 500 VAC for 1 minute Insertion/withdrawal life Industrial environment: 5,000 times Office environment: 10,000 times 5.0 mm (0.196 in.) MATERIALS Specification Item Plug body: PPS resin UL94V-0 Insulating material : 6T nylon (for type III card connector) UL94V-0 Ejector: Polyester : PPS resin (for SMT and type III card connectors) Specifications subject to change Conductor Copper alloy Plating Contact: Gold over palladium over nickel (PAGOS) Terminal: Palladium Dimensions are in millimeters (inches) www.fcai.fujitsu.com 1 560H Series Connector Conforming to Ver. 4 ORDERING PART NUMBER [PLUG] FCN-56 5 P 068-G / XC-V4 V4: Conforms to Ver.4 E4: Conforms to Ver.4 and anti-ESD Specification Plating G: Gold plating Number of contacts: 68, 136 Body P: Plug Pin type 4: Straight 5: Right-angle 8: SMT 560 series connector Fujitsu connector ORDERING PART NUMBER [SOCKET] FCN-56 8 J 068-G / 0 Terminal type 0: PC board double-sided straddle type B: PC board single-sided mounting type Plating G: Gold plating Number of contacts: 68 Body J: Socket Pin type 8: SMT 560 series connector Fujitsu connector Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 2 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGH HOLE TYPE (WITH NO EJECTOR, STANDARD TYPE) SUPPORTS TYPE I, II CARDS DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 50.8 (2) 2.42 (0.095) 4.25 (0.167) 3.5 (0.138) 35.2 (1.39) 1 (0.039) 11.2 (0.44) 2.5mm (0.098) deep spot facing 41.91 (1.65) 1.27 (0.05) 2- o 2.8 (0.110) 5 (0.197) 3.810 (0.15) 3 (0.118) 1.905 (0.075) 5.715 (0.225) 0.51 (0.02) Part number: FCN-565P068-G/C-V4 59.7(2.35) 1.27 (0.05) 4 (0.157) No.2 1.27 (0.05) No.17 No.1 50.8 (2) 0.1 (0.0039) No.1 41.91 (1.65) 7 (0.276) No.34 41.91 (1.65) 0.1 (0.0039) 1.27 (0.05) 0.05 (0.0020) No.3 No.51 1.905 (0.075) 0.05 (0.0020) 3.810 (0.15) 0.05 (0.0020) 5.715 (0.225) 0.05 (0.0020) No.68 No.35 Unit: mm (in.) No.68 68- o 1 (0.039)0.05 (0.0020) 2- o 2.8 (0.110)0.1 (0.0039) (Card insertion side) * Models with a board lock (metal fitting for direct mounting) are also available. Part number: FCN-565P068-G/12-V4 (for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board) FCN-565P068-G/08-V4 (for 1.0 mm (0.039 in.) thick PC board) * Long-terminal models are also available. Part number: FCN-565P068-G/13-V4 (4 mm (0.157 in.)) FCN-565P068-G/02-V4 (10 mm (0.394 in.)) * Models which support Type III are also available. Part number: FCN-565P068-G/17-V4 FCN-565P068-G/18-V4 (with board lock, for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board ) RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, LOW-PROFILE TYPE)) SUPPORTS TYPE I, II CARDS DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 42 (1.65) 24.9 (0.98) 12.2 (0.48) ) 3 (0.118) 1.51 (0.059) 2.5mm (0.098) deep spot facing 1.27 (0.05) 11 (0. 1.905 (0.075) 1.27 (0.05) x (34-1) = 41.91 (1.65) .8 3.810 (0.15) 50.8 (2) 4 (0.157) o2 3 (0.118) 2- 5.715 (0.225) Part number: FCN-565P068-G/01-V4 3.6 (0.141) 58.7 (2.31) 1.27 (0.05) 1.27 (0.05) x (34-1) = 41.91 (1.65) No.1 No.2 1.27 (0.05) No.1 No.34 No.35 No.68 50.8 (2) 0.1 (0.0039) 41.91(1.65) 0.1 (0.0039) 1.27 (0.05) 0.05 (0.0020) No.3 No.68 1.905 (0.075) 0.05 (0.0020) 3.810 (0.15) 0.05 (0.0020) 68- o 1 (0.039) 0.05 (0.0020) 0.05 (0.0020) 5.715 (0.225) 2- o 2.8 (0.110)0.1 (0.0039) (Card insertion side) Use M2.5 (0.098 in) nut and screws. Screw torque is 3.2 kg/cm. In order to avoid damage to the connector, do not pull out the card at an angle. Specifications subject to change Dimensions are in millimeters (inches) Unit: mm (in.) www.fcai.fujitsu.com 3 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TO BE MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) Part number: FCN-565P068-G/F-V4 (2) M2.5 (0.098 in.) thread nut 50.8 (2) 1.27 (0.05) x (34 - 1) = 41.91 (1.65) 2.42 (0.095) 35.2 (1.385) 1.27 (0.05) 11.2 (0.441) 7 (0.276) 2.5 (0.098) 1 (0.039) 5.715 (0.225) 3.810 (0.15) 1.905 (0.075) 0.51 (0.059) 59.7 (2.35) <To be mounted on back of PC board> 50.8 (2) 0.05 (0.0039) 1.27 (0.05) x (68/2-1) = 41.91 (1.65) 0.1 (0.0039) No.68 1.27 (0.05) 0.05 (0.0020) 1.27 (0.05) 1.27 (0.05) x (34 - 1) = 41.91 (1.65) No.68 No.51 4(0.157) 1.27 (0.05) No.35 No.34 2- o 2.8 (0.110)0.1 (0.0039) 1.905 (0.075) 0.05 (0.0020) 3.810 (0.15) 0.05 (0.0020) 5.715 (0.225) 0.05 (0.0020) No.34 No.17 No.35 No.1 68- o 1 (0.039)0.05 (0.0020) (Card insertion side) No.1 * A model with no nuts buried is available. Part number: FCN-565P068-G/H-V4 Unit: mm (in.) RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, RAISED MOUNTING TYPE) SUPPORTS TYPE I, II CARDS DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) o 2. 2 59.7 (2.35) (0 .0 86 50.8 (2) 11.2 (0.441) 6) 35.2 (1.385) 6 (0.236) 2.42 (0.095) 23 (0.118) 8 (0.315) 5.715 (0.225) 3.810 (0.15) 1.905 (0.075) 0.51 (0.059) Part number: FCN-565P068-G/J-V4 (SUPPORTS TYPE I, II CARD) Part number: FCN-565P068-G/J-4V (SUPPORTS TYPE I, II, III CARD) 4.5 (0.177) 1.27 (0.05) x (34 - 1) = 41.91 (1.65) 1.27 (0.05) 7 (0.276) 1.27 (0.05) No.1 No.17 No.34 8.5 No.35 No.51 53.7 (2.114) No.68 No.1 50.8 (2) 0.1 (0.0039) No.2 41.91 (1.65) 0.1 (0.0039) 1.27 (0.05) 0.05 (0.0020) No.3 No.68 1.905 (0.075) 0.05 (0.0020) 3.810 (0.15)0.05 (0.0020) 5.715 (0.225) 0.05 (0.0020) 68- o 1 (0.039)0.05 (0.0020) 2- o 2.8 (0.110)0.1 (0.0039) (Card insertion side) * Applicable screw: Self-tapping screw M2.5 (0.098 in.) x 5 mm (0.197 in.) (for 1.6 mm (0.063 in.) thick PC board) * A model mounted on bottom of a PC board is also available. Part number: FCN-565P068-G16-V4 (supports type I, II) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com Unit: mm (in.) 4 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, SUNK MOUNTING TYPE) SUPPORTS TYPE I, II CARDS DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) Part number: FCN-565P068-G/A-V4 50.8 (2) 1.27 (0.05) x (34-1) = 41.91 (1.65) 8 2. 1.27 (0.05) 2.42 (0.095) 11.2 (0.441) ) 10 .1 (0 5.715 (0.225) 3.810 (0.15) 1.905 (0.075) 2.5mm (0.098) deep spot facing 50.8 (2) 0.1 (0.0039) 59.7 (2.35) 1.27 (0.05) x (68/2-1) = 41.91 (1.65) 0.1 (0.0039) 1.27 (0.05) 0.05 (0.0020) No.1 6 (0.236) No.34 1.27 (0.05) 3 (0.118) 1.27 (0.05) x (34-1) = 41.91 (1.65) 1.27 (0.05) No.1 No.17 No.35 No.34 No.51 6.7 (0.264) 0 o 2- 4.5 (0.177) 35.2 (1.39) 3 (0.118) No.68 No.35 1.905 (0.075) 0.05 (0.0020) 68- o 1 (0.039)0.05 (0.0020) 3.810 (0.15) 0.05 (0.0020) 2- o 2.8 (0.110) 0.1 (0.0039) 5.715 (0.225) 0.05 (0.0020) No.68 Unit: mm (in.) RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TWO LAYER STACK TYPE) DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 59.7 (2.35) No.34 No.68 No.34 No.1 No.68 No.35 1.905 (0.075) x (8-1) = 13.335 (0.525) 0.05 (0.0020) 11.2 (0.441) No.35 4 (0.157) 3 (0.118) 50.8 (2) No.1 11 (0.433) 35.2 (1.39) 2.42 (0.095) 7 7 (0.276) (0.276) 1.905 (0.075) 1.905 (0.075) x (8-1) = 13.335 (0.525) Part number: FCN-565P136-G/0-V4 50.8 (2) 0.1 (0.0039) 1.27 (0.05) x (68/2-1) = 41.91 (1.65) 0.1 (0.0039) No.1 No.35 0.05 (0.0020) 1.27 (0.05) No.34 No.68 No.34 No.1 No.35 No.68 136- o 1 (0.039) 0.05 (0.0020) 2- o 2.8 (0.110) 0.1 (0.0039) 1.905 (0.075) 0.05 (0.0020) Unit: mm (in.) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 5 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, WITH GUIDE ) SUPPORTS TYPE I, II CARDS DIMENSIONS 2- o 2. 8 59.7 (2.35) (0 2.5mm (0.098) deep spot facing 50.8 (2) .1 10 ) 59 (2.32) 4 (0.157) 7 (0.276) *A 83.38 (3.283) 5.715 (0.225) 3.810 (0.15) 1.905 (0.075) 0.51 (0.02) 35.2 (1.386) 11.2 (0.441) 7 3 (0.118) (0.276) 2.42 (0.095) Part number: FCN-565P068-G/C34-V4 No.1 No.34 Unit: mm (in.) No.35 No.68 *A 60.48 mm (2.381 in.) model is also available. FCN-565P068-G/C32-V4 PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 50.8 (2) 0.1 (0.0039) No.1 1.27 (0.05) x (68/2-1) = 41.91 (1.65) 0.1 (0.0039) No.34 1.27 (0.05) 0.05 (0.0020) 2- o 2.8 (0.110) 0.1 (0.0039) 5.715 (0.225) 0.05 (0.0020) 3.810 (0.15) Specifications subject to change 68- o 1 (0.039) 0.05 (0.0020) 0.05 (0.0020) 1.905 (0.075) 0.05 (0.0020) No.35 Dimensions are in millimeters (inches) Unit: mm (in.) No.68 www.fcai.fujitsu.com 6 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR) SUPPORTS TYPE I, II CARDS DIMENSIONS Part number: FCN-565P068-G/XC-V4 (Type I, II Card, Button color: Black) Part number: FCN-565P068-G/XC-4V (Type I, II, III Card, Button color: Black) Part number: FCN-565P068-G/PC-V4 (Type I, II Card, Button color: Beige) o 67.31 (2.65) 2. 8 59.7 (2.35) (0 .1 10 2.5mm (0.098) deep spot facing 50.8 (2) ) 36 (1.417) 40 (1.574) 3.5 (0.138) 5 (0.197) 4.25 (0.167) 11.2 (0.441) 35.2 (1.386) 34 (1.339) .4 0) 83.38 (3.283) 8 (0.315) 1.905 (0.075) 0.51 (0.020) 3.810 (0.15) 5.715 (0.225) 3 (0.118) 7 (0.276) 2.42 (0.095) 2- 10 (0.394) 78.5 (3.091) 59 (2.323) 42 (1.654) 35.5 (1.398) No.17 No.18 No.34 No.1 No.35 No.51 No.52 7 (0.276) 4 (0.157) 2.1 (0.083) 4.8 (0.189) 11 (0.433) 3.7 (0.146) o2 .8 (0. 11 R1 Unit: mm (in.) No.68 A model with an FG accessory for ESD protection is also available. Specify part number FCN-565P068-G/C23-E4, instead of FCN-565P068-G/XC-V4. PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 50.8 (2) 0.1 (0.0039) 41.91 (1.65) 0.1 (0.0039) 1.27 (0.05) 0.05 (0.0020) No.3 3.810 (0.15) 1.905 (0.075) 0.05 (0.0020) 0.05 (0.0020) 5.715 (0.225) 0.05 (0.0020) 1 0. ) 10 8 o 4- 2. 1 0. ( 68- o 1 (0.039)0.05 (0.0020) No.68 ) 39 00 . (0 2- o 2.8 (0.110)0.1 (0.0039) 40 (1.574) 0.1 (0.0039) No.1 No.2 34 (1.339) 0.05 (0.0020) 67.31 (2.65)~68.0 (2.677) (Card insertion side) Unit: mm (in.) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 7 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR) SUPPORTS TYPE I, II CARDS DIMENSIONS Part number: FCN-565P068-G/MC-V4 (Button color: Black) Part number: FCN-565P068-G/C22-V4 (Button color: Beige) o 67.31 (2.65) 2. 8 (0 59.7 (2.35) .1 10 2.5mm (0.098) deep spot facing 50.8 (2) ) 36 (1.417) 8 (0.315) 40 (1.574) 5 (0.197) 83.38 (3.283) 3.7 (0.146) o 2.8 (0.110) 4.25 (0.167) 11.2 (0.441) 3.5 (0.138) 34 (1.339) 35.2 (1.386) 0.51 (0.020) 3.810 (0.15) 1.905 (0.075) 5.715 (0.225) 3 (0.118) 2.42 (0.095) 27 (0.276) .4 78.5 (3.091) 59 (2.323) 42 (1.654) 35.5 (1.398) No.1 No.17 No.18 No.34 2.1 (0.083) 10 (0.394) 7 (0.276) 4.8 (0.189) 4 (0.157) 11 (0.433) R1 Unit: mm (in.) No.35 No.51 No.52 No.68 Models with an FG accessory ESD protection are also available. Specify part number FCN-565P068-G/KC-E4 instead of FCN-565P068-G/MC-V4, or specify FCN-565P068-G/C33-E4 instead of FCN-565P068-G/C22-V4. PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 50.8 (2) 0.1 (0.0039) 41.91 (1.65) 0.1 (0.0039) 1.27 (0.05) 0.05 (0.0020) No.3 3.810 (0.15) 0.05 (0.0020) 1.905 (0.075) 0.05 (0.0020) 9) 03 No.68 .0 .1 (0 0 ) 10 .1 4- o .8 (0 2 2- o 2.8 (0.110) 0.1 (0.0039) 68- o 1 (0.039) 0.05 (0.0020) 5.715 (0.225) 0.05 (0.0020) No.2 40 (1.574) 0.1 (0.0039) No.1 34 (1.339) 0.05 (0.0020) 67.31 (2.65)~68.0 (2.677) (Card insertion side) Specifications subject to change Dimensions are in millimeters (inches) Unit: mm (in.) www.fcai.fujitsu.com 8 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, TO BE MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS DIMENSIONS Part number: FCN-565P068-G/XF-V4 (Button color: Black) Part number: FCN-565P068-G/PF-V4 (Button color: Beige) 2.42 (0.095) 67.31 (2.65) 59.7 (2.35) 2.5mm (0.098) deep spot facing 50.8 (2) When a card is ejected 10 (0.394) 42 (1.654) 35.5 (1.398) No.35 No.34 Unit: mm (in.) 7 (0.276) 4 (0.157) 78.5 (3.091) 59 (2.323) No.68 3.7 (0.146) When a card is inserted 36 (1.417) .4 R1 4.8 (0.189) 2.1 (0.083) 40 (1.574) 5 (0.197) 4.25 (0.167) 11.2 (0.441) 35.2 (1.386) 83.38 (3.283) 8 (0.315) 3.5 (0.138) 34 (1.339) 1 (0.039) 1.905 (0.075) 0.51 (0.020) 5.715 (0.225) 3.810 (0.15) 2.5 o 2.8 (0.110) 7 (0.276) No.1 PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) MOUNTING EXAMPLE 50.8 (2) 0.1 (0.0039) 1.27 (0.05) x (68/2-1) = 41.91 (1.65)0.1 (0.0039) No 1.27 (0.05) 0.05 (0.0020) No.35 00 20 ) 1.905 (0.075) 0.05 (0.0020) 0.0 3 9) 03 (0 ) -o 10 .1 4- o 8 2. (0 1( .0 1 . 0 No.1 Nut buried 40 (1.574) 0.1 (0.0039) 9) 0 .05 (0. No.34 68 3.810 (0.15) 0.05 (0.0020) 5.715 (0.225) 0.05 (0.0020) .68 34 (1.339) 0.05 (0.0020) 67.31 (2.65)~68.0 (2.677) Unit: mm (in.) Specifications subject to change Ejector button Regardless of how the connector is mounted on the PC board, a card can be inserted with its face upward. Dimensions are in millimeters (inches) www.fcai.fujitsu.com 9 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, SUNK MOUNTING TYPE) SUPPORTS TYPE I, II CARDS DIMENSIONS 67.31 (2.65) 59.7 (2.35) 50.8 (2) 35.2 (1.386) R1 3.7 (0.146) When a card is ejected 11 (0.433) When a card is inserted 5 (0.197) .4 8 2. o 3 (0.118) 10 (0.394) 78.5 (3.091) 42 (1.654) 7 (0.276) 35.5 (1.398) No.17 No.1 No.34 2.1 (0.083) 2.1 (0.083) 5 (0.197) 4.25 (0.167) 6 (0.236) 2.5 (0.098) 2- o 2.8 (0.110) 34 (1.339) 3.5 (0.138) 11.2 (0.441) 8 (0.315) 4.5 (0.177) 2.42 (0.095) 3 (0.118) 83.38 (3.283) 5.715 (0.225) 3.810 (0.15) 1.905 (0.075) 0.51 (0.020) Part number: FCN-565P068-G/W-V4 Unit: mm (in.) No.35 No.51 No.68 2.5 (0.098) PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) No.2 50.8 (2) 0.1(0.0039) 41.91 (1.65) 0.1 (0.0039) 1.27 (0.05) 0.05 (0.0020) No.3 6.7 +0 No.1 5.715 (0.225) 0.05 (0.0020) 2- o 2.8 (0.110) 0.1(0.0039) 3.810 (0.15) 0.05 (0.0020) 1.905 (0.075) 0.05 (0.0020) No.68 68- o 1 (0.039) 0.05 (0.0020) Unit: mm (in.) (Card insertion side) MOUNTING EXAMPLE Nut Mounting height 4.5mm(0.177in.) Nut M2.5 screw The connector is mounted on a PC board so that only its terminal connection part rests on the board. Specifications subject to change Dimensions are in millimeters (inches) Unit: mm (in.) www.fcai.fujitsu.com 10 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 4.5 MM (0.177 IN.) RAISED TYPE) SUPPORTS TYPE I, II CARDS DIMENSIONS 0.2 (0.0078) 5.2 (0.205) When a card is ejected 12.5 (0.492) When a card is inserted 3.5 (0.138) 5 (0.197) 4.25 (0.167) 11.2 (0.441) 35.2 (1.386) 2.42 (0.095) 76.48 (3.011) 81.88 (3.224) 1.905 (0.075) ) o 2.2 , 4.5 deep 87 8 (0.315) 50.8 (2) .0 9 (0.354) 2 4.5 (0.177) 59.7 (2.35) 2. 3(0.118) (0 0.51 (0.020) o 3.810 (0.15) 2- 5.715 (0.225) Part number: FCN-565P068-G/J25-V4 (supports type I, II card) Part number: FCN-565P068-G/J25-4V (supports type I, II, III card) 4.8 (0.189) 10 (0.394) 59 (2.323) 8 (0.315) No.35 No.68 8.5 (0.335) No.1 7 (0.276) 4.5 (0.177) 11.5 (0.453) 42 (1.654) 35.5 (1.398) No.34 50.8 (2) PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) +0 -0 33.78 (1.330) -0 3.42 (0.135) 82.88 (3.263) -0 71.88 (2.830) 61.7 (2.429) 0.1 51.7 (2.035) +0 76.48 (3.011) 4 - o 2.8 (0.110) 0.1 (0.0039) +0 No.68 68- o 1 (0.0394) 0.05 (0.0020) -0 0.05 (0.0020) 1.905 (0.075) No.35 6.58 (0.259) 0.05 (0.0020) 0.05 (0.0020) 5.715 (0.225) 3.810 (0.15) 1.27 (0.05) No.34 0.05 (0.0020) 23.78 (0.936) 1.27 (0.05) x (68/2-1) = 41.91 (1.65) 0.1 (0.0039) 41.7 (1.642) +0 50.8 (2) 0.1 (0.0039) 61.7 (2.429) MOUNTING EXAMPLE -0 50.8 (2) 0.1 (0.0039) No.1 Unit: mm (in.) 8 (0.315) Unit: mm (in.) -0 * Components with a height of 4.3 mm (0.169 in.) maximum can be installed under the connector. * Use M2.5 mm (0.098 in.) x 5 mm (0.197in.) self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is used) to mount the connector to the board. Component mounting is prohibited in the hatched areas. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 11 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 5 mm (0.197 in.) RAISED TYPE, WITH OR WITHOUT FG CLIP) SUPPORTS TYPE I, II CARDS DIMENSIONS Part number: FCN-565P068-G/0442-E4 (with FG clip) 0.2 (0.008) 8.07 (When a card is inserted) 40 (1.57) 42.81 (1.69) 12 (0.472) No.35 No.68 22 (0.866) 34 (1.339) 57.51 (2.26) 5 (0.197) 8.5 (0.335) No.35 22 (0.866) 9 (0.354) 1.2 (0.047) 9 (0.354) 12 (0.472) 5 (0.197) R4 8.5 (0.335) 59.7 (2.35) 50.8 (2) 12.9 10 (0.394) 71.85 (2.83) 59 (2.32) 42 (1.654) 35.5 (1.398) No.1 No.34 4.8 (0.189) 10 (0.394) 71.85 (2.83) 59 (2.32) 42 (1.654) 35.5 (1.398) No.1 No.34 1.2 (0.047) 6 (0.236) 86.31 (3.40) 2.42 79.3 (3.12) (0.095) 76.31 (3.00) 35.2 (1.386) 11.2 (0.441) R4 12.9 4.8 (0.189) 5 (0.197) 5.715 (0.225) 2- o 6 (0.236) 3.810 (0.150) 2- o 4 (0.157) 2- o 2.35 (0.0925) 1.905 (0.075) 0.51 (0.020) 8.07 (When a card is inserted) 40 (1.57) 42.81 (1.69) 0.77 (When a card is ejected) 6 (0.236) 7.8 (0.307) 3 (0.118) 0.77 (When a card is ejected) 0.2 (0.008) 59.7 (2.35) 50.8 (2) 86.31 (3.40) 79.3 (3.12) 76.31 (3.00) 35.2 (1.386) 11.2 (0.441) 2- o 6 (0.236) 5.715 (0.225) 3.810 (0.150) 2- o 4 (0.157) 2- o 2.35 (0.0925) 1.905 (0.075) 0.51 (0.020) 2.42 (0.095) 5 (0.197) 2.8 2-R 2.6 o 2- 2.8 2-R 2.6 o 2- 3 (0.118) Part number: FCN-565P068-G/0426-V4 (with no FG clip) No.68 34 (1.339) Unit: mm (in.) PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) .1 (0 .0 03 9) 1.27 (0.05) 0.05 (0.0020) 2. .2 +0 .0 (0 9) 07 .2 +0 0 - .0 (0 9) 07 7.8 (0.307)0.1 (0.0039) 42.81 (1.69) 0.1 (0.0039) ) 0 3.42 (0.135) -0 38 -0 .1 6.58 (0.259) -0 68- o 1 (0.039) 0.05 (0.0020) 2- 50.8 (2) 0.1 (0.0039) 1.27 (0.05) x (68/2-1) = 41.91 (1.65) 0.1 (0.0039) ) 77 .1 (0 0 5 5) - 4. .31 o 8 (0 2- 2- o (0. 07 9) 0 .1 (0.0 03 9) 2. o2 3.810 (0.150) 0.05 (0.0020) 1.905 (0.075) 0.05 (0.0020) 5.715 (0.225) 0.05 (0.0020) 1.27 (0.05) 0.05 (0.0020) ) -0 77 .1 (0 -0 5 15) 4. 0.3 o 8 ( 2- 2- o 76.31 (3.0) 0.1 (0.0039) 9) (0 68- o 1 (0.039) 0.05 (0.0020) 03 5 1.905 (0.075) 0.05 (0.0020) .0 61.7 (2.43) -0 3. 3.810 (0.150) 0.05 (0.0020) (0 o 5.715 (0.225) 0.05 (0.0020 ) 0 2- 76.31 (3.0) 0.1 (0.0039) 38 .1 -0 50.8 (2) 0.1 (0.0039) 1.27 (0.05) x (68/2-1) = 41.91 (1.65) 0.1 (0.0039) .1 42.81 (1.69) 61.7 (2.43) (0 0.1 (0.0039) 5 -0 3. 3.42 (0.135) o 6.58 (0.259) 2- 34 (1.339)0.1 (0.0039) 34 (1.339) 0.1 (0.0039) 22 (0.866) 0.1 (0.0039) 57.15 (2.25) 0.1 (0.0039) 2. Component mounting is prohibited in the hatched areas. 22 (0.866) 0.1 (0.0039) 2. Component mounting is prohibited in the hatched areas. Unit: mm (in.) * Use M3 mm (0.118 in.) x 5.5 mm (0.217 in.) thread self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is used) to mount the connector to the board. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 12 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, 4.5 mm (0.177 in.) RAISED TYPE, WITH FG CLIP FOR ESD PROTECTION) SUPPORTS TYPE I, II CARDS DIMENSIONS 0.2 (0.0079) 2.42 (0.0953) 59.7 (2.35) 50.8 (2) .4 R1 o 2.8 (0.110) 28.5 (1.12) 8 (0.315) 40 (1.57) 35.2 (1.385) 11.2 (0.441) 34 (1.34) 83.38 (3.28) 0.51 (0.020) 3.810 (0.150) 67.31 (2.65) 6) 86 .0 (0 1.905 (0.075) 3 (0.118) 2 2. 5.715 (0.225) o 2- Part number: FCN-565P068-G/J38-E4 11.5 (0.453) 8 (0.315) 78.5 (3.09) 59 (2.32) 42 (1.65) 35.5 (1.40) No.1 No.34 No.35 28.45 (1.12) 4.5 (0.177) 10 (0.394) 1.8 (0.071) 4.8 (0.189) 8.5 (0.335) 11 (0.433) SMT*FG Clip No.68 2 (0.079) Unit: mm (in.) * Models with a right-button ejector, and with or without an ESD/FG clip are also available. Contact Fujitsu. PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 50.8 (2) 0.1 (0.0039) 1.27 (0.05) x (68/2-1) = 41.91 (1.65) 0.1 (0.0039) 68- o 1 (0.039)0.05 (0.0020) 03 .0 1 0. (0 ) 10 .1 8 4- o 2. (0 No.68 3 (0.118) 0.1 (0.0039) 1.905 (0.075) 0.05 (0.0020) 3.810 (0.150) 0.05 (0.0020) 5.715 (0.225) 0.05 (0.0020) 9) No.35 34 (1.34) 0.05 (0.002) 29.45 40 (1.57) 0.1 (0.0039) No.34 1.27 (0.05) 0.05 (0.0020) 28.5 (1.12) No.1 4 (0.157) 0.1 (0.0039) 0.1 (0.0039) Unit: mm (in.) 67.31 (2.65)~68.0 (2.68) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 13 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT EJECTOR BUTTON, 5 mm (0.197 in.) RAISED TYPE, WITH ESD CLIPS DIMENSIONS Part number: FCN-565P068-G/0221-E4 83.38 (3.28) ) 40 (1.57) 8 2. 10 (.1 35.2 (1.39) 11.2 (.441) 10 (.1 11 (.433) 2 1.8 (.071) 40 (1.574) 1 (.039) 7 4.8 (0.189) No. 35 5 (.197) 10.5 (.413) (.276) (.276) 7 42 (1.65) 35.5 (1.398) No. 1 11 (.433) 8 (.315) 3 (0.118) 51.7 (2.04) 78.5 (3.09) 59 (2.32) 10 (.394) R1.4 1 (.039) No. 68 No. 34 67.31 (2.65) 59.7 (2.35) 50.8 (2.00) 34 (1.34) ) .8 0.51(0.020) 1.905 (0.075) 3.810 (0.150) 5.715 (0.225) Unit: mm (in.) PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 400.1 (1.57.002) 6-0 (.236-0) 9.5-0 (.347-0) 340.05 (1.330.002) 67.31+0.2 (2.65 +0.008) 75-0 (2.95-0) 61.7-0 (2.429-0) 51.7+0 (2.035+0) Note 3 1.270.05 (0.050.002) 1.27 x (68/2-1) = 41.910.1 (1.650.004) 50.080.1 (2.000.004) 4.4-0 (.173-0) 5-0(.197-0) PCB Foot Print Viewed from Connector Side NOTE 2 COMPONENT CON NOT BE MOUNTED IN THIS AREA NOTE 3 COMPONENTS THAT HAVE 5mm HEIGHT CAN BE MOUNTED IN THIS AREA NOTE 4 UNLESS OTHERWISE SPECIFIED TOLERANCES ARE 0.5mm (0.002 in.) 1.9050.05 (.0750.002) - 5 .0 0 1 5.7150.05 (.2250.002) 68 3.8100.05 (.1500.002) Note 2 02 .0 0 39 (.0 Unit: mm (in.) ) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 14 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, 5 mm (0.197 in.) RAISED TYPE, WITH ESD CLIPS DIMENSIONS Part number: FCN-565P068-G/0231-E4 1 (.039) 11 (.433) 8 (.315) 10.5 (.413) 40 (1.574) No. 35 51.7 (2.04) 42 (1.65) 35.5 (1.398) No. 34 No. 1 78.5 (3.09) 59 (2.32) 67.31 (2.65) 59.7 (2.35) 50.8 (2.00) 34 (1.34) No. 68 5 (.197) 10 (.394) 1 (.039) ) 8 2. 11.2 (.441) 10 (.1 35.2 (1.39) 40 (1.57) 2. 8 (.1 10 7 7 4.8 (0.189) 11 (.433) (.276) (.276) 3 (0.118) 1.8 (.071) ) 83.38 (3.28) 0.51(0.020) 1.905 (0.075) 3.810 (0.150) 5.715 (0.225) Unit: mm (in.) PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 400.1 (1.57.002) 6-0 (.236-0) 9.5-0 (.347-0) 340.05 (1.330.002) 67.31+0.2 (2.65 +0.008) 75-0 (2.95-0) 61.7-0 (2.429-0) 51.7+0 (2.035+0) Note 3 1.270.05 (0.050.002) 1.27 x (68/2-1) = 41.910.1 (1.650.004) 50.080.1 (2.000.004) 4.4-0 (.173-0) 5-0(.197-0) PCB Foot Print Viewed from Connector Side NOTE 2 COMPONENT CON NOT BE MOUNTED IN THIS AREA NOTE 3 COMPONENTS THAT HAVE 5mm HEIGHT CAN BE MOUNTED IN THIS AREA NOTE 4 UNLESS OTHERWISE SPECIFIED TOLERANCES ARE 0.5mm (0.002 in.) 1.9050.05 (.0750.002) 0 1 Note 2 5 .0 5.7150.05 (.2250.002) 68 3.8100.05 (.1500.002) (.0 02 .0 0 39 Unit: mm (in.) ) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 15 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, TWO LAYER EJECT TYPE) DIMENSIONS 3.7 (0.146) (When a card is ejected) 40 (1.57) 11.2 (0.441) 42 (1.65) 1 (0.039) 11.2 (0.441) 40 (1.57) 2.42 (0.0953) 11 (0.433) 4.8 (0.189) 10 (0.394) 4.8 (0.189) 10 (0.394) 42 (1.654) 42 (1.654) 35.5 (1.398) 35.5 (1.398) 11 (0.433) No. 68 4 (0.157) No.34 No. 1 No. 35 Unit: mm (in.) No. 68 No. 34 3 (0.118) No.1 No. 34 No. 1 No. 35 No.68 2.1 (0.083) 4 (0.157) 11 (0.433) 11 (0,.433) No.68 No.35 34 (1.34) No.34 35.5 (1.40) No.35 35.2 (1.385) 40 (1.57) 1.905 (0.075) x (8-1) = 13.335 (0.525) 59 (2.32) No.1 67.31 (2.65) 59.7 (2.35) 50.8 (2) 83.38 (3.28) 10 (0.394) 78.5 (3.09) 7 7 (0.276) (0.276) 3.7 (0.146) 4.8 (0.189) Part Number: FCN-565P 136G/005-V4 1.905 (0.075) 4.8 (0.189) Connector with the left and right ejector buttons 11 (0.433) 35.2 (1.385) 8 (0.315) 40 (1.57) 83.38 (3.28) 67.31 (2.65) 59.7 (2.35) 50.8 (2) 34 (1.34) 1 (0.039) 2.42 (0.0953) 7 7 (0.276) (0.276) 1.905 (0.075) 1.905 (0.075) x (8-1) = 13.335 (0.525) Part Number: FCN-565P136-G/Z-V4 Unit: mm (in.) No.1 No.35 50.8 (2) 0.1 (0.0039) 1.27 (0.05) x (68/2-1) = 41.91 (1.65) 0.1 (0.0039) 1.27 (0.05)0.05 (0.0020) 4- o 2.8 (0.110) 0.1 (0.0039) 40 (1.575) 0.1 (0.0039) 613 No.1 No.35 No.34 No.68 o 1 0.0 5 No.34 No.68 1.905 (0.075) 0.05 (0.0020) 1.905 (0.075) x (8-1) = 13.335 (0.525) 0.05 (0.0020) PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 34 (1.339) 0.05 (0.0020) 67.31 (2.65) 0.1 (0.0039) Unit: mm (in.) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 16 560H Series Connector Conforming to Ver. 4 FCN-560A*** EJECTORS FOR FCN-564/565 HEADERS DIMENSIONS 50.6 (1.99) 25 (.984) BEIGE 8 (.315) ESD 35.5 (1.40) 78.5 (3.09) 59 (2.32) 42 (1.65) 10 (.394) 67.31 (2.650) 59.7 (2.35) 34 (1.34) ) .110 .8 ( FCN-560A14 7 (.275) 7.22 (.284) 2.1 (.083) 4 (.157) 4 (.157) 4.8 (.189) 2 FCN-560A08 Button Color BLACK Right Button 11 (.433) Unit: mm (in.) FCN-560A16 Button Color BLACK FCN-560A22 BEIGE Left Button 8 (.315) 4 (.157) 2.1 (.083) 10 (.394) 78.5 (3.09) 59 (2.32) 51 (2.01) min. 34 (1.34) 0) 7.22 (.284) 25 (.984) ESD 35.5 (1.40) .11 50.6 (1.99) 7 (.275) 4.8 (.189) 11 (.433) 4 (.157) 67.31 (2.650) 59.7 (2.35) .8 ( 42 (1.65) 2 Unit: mm (in.) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 17 560H Series Connector Conforming to Ver. 4 STRAIGHT PLUG, THROUGHHOLE TYPE LOW PROFILE DIMENSIONS 59.74 (2.35) 1.27 x (34-1) = 41.9 (1.65) 1.27 (0.05) 5.715 (0.225) No.1 No.35 No.17 No.51 No.34 No.68 2.40 (.0945) 6.00 (.236) 7.00 (.276) 44.80 (1.76) 51.80 (2.039) 10.80 (.425) 1.27 (0.05) 7.63 (.300) 25.80 (1.016) 5.50 (.216) 1.905 (0.075) 8.30 (.327) 3.00 (.118) Part number: FCN-564P068-G/A-V4 Unit: mm (in.) PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) No.1 1.27 x (68/2-1) = 41.91 (1.65) 0.1 (0.0039) 0.05 (0.0020) 1.27 (0.05) 1.905 (0.118) 0.05 (0.0020) 5.715 (0.225)0.05 (0.0020) 68 -O No. 35 1 (0 .0 39 4) No.68 51.8 (2.039) 0.1 (0.0039) Unit: mm (in.) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 18 560H Series Connector Conforming to Ver. 4 STRAIGHT PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR) DIMENSIONS Part number: FCN-564P068-G/0-V4 Polarization Post 74 (2.91) 66.04 (2.6) 50.8 (2) 41.91 (1.65) 3.5 (0.138) 2.42 (0.095) 35.2 (1.390) 1.27 (0.05) 4.25 (0.167) 5 (0.197) 1 (0.039) 11.2 (0.441) 3 (0.118) 1.905 (0.075) 2- O 2.8 (0.110) 5.5 (0.217) 5.715 (0.225) 59.7 (2.35) 41.91 (1.65) 1.27 (0.05) No.17 No.51 No.34 10 ) No.1 6 (0.236) 1.27 (0.05) 4 (0.157) 7 (0.394) No.68 2- O 2. 8 (0 .1 No.35 Unit: mm (in.) * A model with the feature of preventing mismated board mounting is available. Contact Fujitsu. PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 66.04 (2.6) 0.1 (0.0039) No.1 2- 68 -O O 2. .0 8 (0 .1 0 10 ) .1 .1 .0 5 0 0 ) 4) 94 39 03 (0 . (0 No.68 1 00 (0 .0 03 (0 9) .0 (0 03 .0 02 0) 9) ed us 1.905 (0.118) 0.05 (0.0020) 0.05 (0.0020) 1. 5.715 (0.225) 41.91 (1.65) 0.1 (0.0039) 1.27 (0.05) No.3 O 0.05 (0.0020) No.2 tio iza ar ol rp fo n po st Specifications subject to change Dimensions are in millimeters (inches) Unit: mm (in.) www.fcai.fujitsu.com 19 560H Series Connector Conforming to Ver. 4 STRAIGHT PLUG, THROUGHHOLE TYPE (WITH EJECTOR) DIMENSIONS Part number: FCN-564P068-G/X0-V4 74 (2.91) 67.31 (2.65) 66.04 (2.6) 4 (0.157) .4 O 2.8 (0.110) 40 (1.57) 8 (0.315) 11 (0.433) (When a cardis inserted) R1 3.7 (0.146) (When a cardis ejected) 36 (1.42) 5 (0.197) 2 - O 2.8 (0.110) 4.25 (0.167) 83.38 (3.28) 3.5 (0.138) 50.8 (2) 41.91 (1.65) 1.27 (0.05) 35.2 (1.39) 3 (0.118) 1.905 (0.075) 2.42 (0.095) 5.715 (0.225) 34 (1.34) 4.8 (0.177) 2.1 (0.083) 78.5 (3.09) 10 (0.394) No.1 No.17 No.35 No.51 No.68 7 (0.276) 42 (1.653) 35.5 (1,40) No.34 Unit: mm (in.) PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 66.04 (2.6) 0.1 (0.0039) No.1 Specifications subject to change 41.91 (1.65) 0.1 (0.0039) 1.27 (0.05) 0.05 (0.0020) No.3 1.905 (0.075) 0.05 (0.0020) 5.715 (0.225) 0.05 (0.0020) No.2 Dimensions are in millimeters (inches) 268 -O No.68 O 2. 8 1 (0 .1 10 (0 .0 ) 39 4) 0 .1 (0 .0 0 03 .0 5 9) (0 .0 02 0) www.fcai.fujitsu.com Unit: mm (in.) 20 560H Series Connector Conforming to Ver. 4 Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141-0022, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@fcl.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com (c) 2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America, Inc. or its affiliates do not warrant that the content of the datatasheet is error free. In a continuing effort to improve our products, Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2, 2007. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 21