AMORPHOUS CHOKE COIL @MAJOR USES @For harmonic counter-measure active filter @For normal mode line filter @FEATURES @Excellent d.c.current pre-loadability characteristics @Reduction of core loss in comparison with the conventional CM-series coils, providing low temperature rises for uses at power of 100V or larger @Excellent temperature stability @GENERAL SPECIFICATION (Reference sample) O : Maximum outer diameter W : Maximum width Total tead length (L)* - 30mm (43mm, -3mm) Saldering boundary (a)" : Omm (+4mm, -Omm) * The bottom of Ihe core or coil (is defined as the base surtace. The specification value of the scidering boundary a vanes depending on the number cf windings of the wre. a P/N Rated current : Arms Peak: current A Inductance (100kHz) ofAy"t | | DCR. (max) | os Outside Winding 2 dimension D WwW mm mm. Oo} AM03152J8H 2000 230 0.85X1p -116T 34.0 26.0 Oo} AM04801J8H 1100 150 0.9Xip - 84T 32.5 25.5 oO] AMO05901JAH 900 1.1X1p - 81T 40.5 32.0 Oo AM06651JAH 69T e| AM08801JCH 8 11.3 1000 73 1.0*2p - 72T 56.0 33.5 e| AM10501JCH 10 14.1 600 500 45 1.12p - 56T 54.5 32.5 | AM12351JCH 12 17.0 420 350 33 1.2X2p - 47T 55.0 32.0 AM12701JLH 12 17.0 860 700 53 1.2X2p - 61T 12.5 39.0 AM15451JLH 15 21.2 550 450 35 1.1X3p - 49T 72.0 40.0 AM20251JLH 20 28.3 310 250 20 1.1X4p - 37T 12.5 39.0 *1 The inductance at current 0 [A] indicates the reference value. *2 The number of turns indicates the reference value. The specification of the inductance takes precedence over that of the number of turns. The coils of the lying type are also provided for all the items listed in the table above. For a coil of the type, symbol | should be added to the end of the part number shown in the table (e.g. AMQ5901JAI). The coils of the pedestal attachment type are also provided for the items with symbol @ in the table above. For a coil of the type, symbol J should be added to the end of the part number shown in the table (e.g. AMO5901JAJ). The items preceded by symbol O include two types, or the depth type with pedestal and the bed type with pedestal. To order the item of the depth or bed type, add J or B at the end of the item of the item name respectively, as shown in the examples below:(AM05122JBJ for the depth type with pedestal) (AM05901JAB for the bed type with pedestal) *Order the auxiliary pins separately if they are required for the pedestal. CAT. No. E1008A AMORPHOUS CHOKE COIL @inductance-Frequency @AM choke @dc-current pre-loadability (1) <Example> @Core : C251510J3, C251515J2, C322015U2, Frequency : 100 kHz AMO03152J8H | AM04102JRH AMO5751JRH |: @dc-current pre-loadability (3) <Example> @Core : C462720J2, C462725J2, Frequency : 100 kHz Temperature dependence @Frequency : 100 kHz, AM chok Inductance at rated current @dc-current pre-loadability (2) <Example> -+aMoe651JAH AMO05901JAH @dc-current pre-loadability (4) <Example> 6Core : C462725J2, C603525J2, Frequency : 100 kHz CAT. No. E1008A