Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Typical Applications Features The HMC333 / HMC333E is ideal for: Integrated LO Amplifier w/ Pdiss: < 25 mW * Wireless Local Loop Conversion Loss / Noise Figure: 8.5 dB Low LO Drive Level: 0 dBm Input IP3: +10 dBm Single Positive Supply: 3V to 5V MIXERS - SGL-BAL - SMT 9 Functional Diagram General Description The HMC333 & HMC333E are single balanced mixer ICs with integrated LO amplifiers. This converter IC can operate as an upconverter or downconverter between 3.0 GHz and 3.8 GHz. With the integrated LO amplifier, the mixer requires an LO drive level of only 0 dBm, and requires only 7 mA from a single positive +3V rail. The mixer has 8.5 dB of conversion loss, an input P1dB of 0 dBm and an input third order intercept point of +10 dBm at 3.5 GHz. Electrical Specifi cations, TA = +25 C IF = 100 MHz LO = 0 dBm & Vdd = +3V Parameter Min. Typ. Units Max. Frequency Range, RF & LO 3.0 - 3.8 GHz Frequency Range, IF DC - 1.0 GHz Conversion Loss 8.5 11 dB Noise Figure (SSB) 8.5 11 dB LO to RF Isolation 10 15 dB LO to IF Isolation 5 10 dB RF to IF Isolation 10 15 dB IP3 (Input) 3 10 dBm 1 dB Compression (Input) -3 +1 dBm 7 mA Supply Current (Idd) * Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz. 9 - 194 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Isolation @ LO = 0 dBm 0 0 -5 -5 -10 +25 C -40 C +85 C -15 -20 2.4 2.8 3.2 RF/IF LO/RF LO/IF -10 9 -15 3.6 4 -20 2.4 4.4 2.8 FREQUENCY (GHz) Conversion Gain vs. LO Drive 4 4.4 0 -6 dBm -4 dBm -2 dBm -5 -5 0 dBm +2 dBm +4 dBm RETURN LOSS (dB) CONVERSION GAIN (dB) 3.6 Return Loss @ LO = 0 dBm 0 -10 -15 -10 -15 RF LO -20 -25 -20 2.4 -30 2.8 3.2 3.6 4 4.4 0 1 FREQUENCY (GHz) -5 -5 RESPONSE (dB) 0 -10 -20 2.4 3 4 5 6 IF Bandwidth @ LO = 0 dBm 0 +2.7V +3.0V +3.3V -15 2 FREQUENCY (GHz) Conversion Gain vs. Vdd @ LO = 0 dBm CONVERSION GAIN (dB) 3.2 FREQUENCY (GHz) MIXERS - SGL-BAL - SMT ISOLATION (dB) CONVERSION GAIN (dB) Conversion Gain vs. Temperature @ LO = 0 dBm -10 CONVERSION GAIN RETURN LOSS -15 -20 2.8 3.2 3.6 FREQUENCY (GHz) 4 4.4 0 0.2 0.4 0.6 0.8 1 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 195 HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Upconverter Performance Conversion Gain @ LO = 0 dBm Input P1dB vs. Temperature @ LO = 0 dBm 10 6 INPUT P1dB (dBm) -5 -10 -15 2 -2 +25 C -40 C +85 C -6 -10 2.9 -20 3 3.2 3.4 3.6 3.8 4 3.1 3.5 3.7 3.9 3.8 4 Input IP3 vs. Temperature @ LO = 0 dBm* Input IP3 vs. LO Drive* 20 15 15 IP3 (dBm) 20 10 -2 dBm 0 dBm +2 dBm 5 3.3 FREQUENCY (GHz) FREQUENCY (GHz) IP3 (dBm) MIXERS - SGL-BAL - SMT 9 CONVERSION GAIN (dB) 0 10 +25 C -40 C +85 C 5 0 0 3 3.2 3.4 3.6 3.8 4 3 3.2 FREQUENCY (GHz) 3.4 3.6 FREQUENCY (GHz) Input IP3 vs. Vdd @ LO = 0 dBm* Input P1dB vs. Vdd @ LO = 0 dBm 20 10 6 INPUT P1dB (dBm) IP3 (dBm) 15 10 +2.7V +3.0V +3.3V 5 3.2 3.4 3.6 -2 +2.7V +3.0V +3.3V -6 0 3 2 3.8 4 FREQUENCY (GHz) -10 2.9 3.1 3.3 3.5 3.7 FREQUENCY (GHz) * Two-tone input power= -10 dBm each tone, 1 MHz spacing. 9 - 196 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 3.9 HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Harmonics of LO MxN Spurious @ IF Port nLO Spur @ RF Port LO Freq. (GHz) 1 2 3 4 mRF 0 1 2 3 4 0 xx -9 -5 12 34 3 12 8 16 49 13 8 20 39 1 8 0 32 25 34 3.17 2 33 49 40 40 43 3.34 17 10 22 42 3 68 56 68 48 72 3.51 15 14 26 48 4 77 80 79 80 71 3.68 14 17 25 42 3.85 14 18 22 43 RF = 3.5 GHz @ -10 dBm LO = 3.4 GHz @ 0 dBm All values in dBc below IF power level. LO = 0 dBm All values in dBc below input LO level @ RF port. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 MIXERS - SGL-BAL - SMT nLO 9 - 197 HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Absolute Maximum Ratings RF / IF Input (Vdd = +3V) MIXERS - SGL-BAL - SMT 9 +13 dBm LO Drive (Vdd = +3V) +13 dBm Vdd 5.5V Continuous Pdiss (Ta = 85 C) (derate 2.64 mW/C above 85 C) 238 mW IF DC Current 3 mA Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC333 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC333E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H333 XXXX [2] 333E XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX 9 - 198 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Pin Descriptions Function Description 1 Vdd Power supply for the LO Amplifier. Two external RF bypass capacitors (10 pF & 10,000 pF) and an external inductor (1.8 nH) are required. 2, 5 GND Ground: Pin must connect to RF ground. 3 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 3mA of current or die nonfunction and possible die failure will result. 4 RF This pin is AC coupled and matched to 50 Ohm from 3.0 - 3.8 GHz. 6 LO This pin is AC coupled and matched to 50 Ohm from 3.0 - 3.8 GHz Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 MIXERS - SGL-BAL - SMT Pin Number 9 - 199 HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Application Circuit MIXERS - SGL-BAL - SMT 9 9 - 200 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC333 / 333E v01.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 3.0 - 3.8 GHz Evaluation PCB MIXERS - SGL-BAL - SMT 9 List of Materials for Evaluation PCB 105128 [1] Item Description J1 - J4 PCB Mount SMA RF Connector C1 10 pF Capacitor, 0603 Pkg. C2 .01 F Capacitor, 0603 Pkg. L1 1.8 nH Inductor, 0805 Pkg. U1 HMC333 / HMC333E Mixer PCB [2] 103927 Evaluation Board [1] Reference this number when ordering complete evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 201 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC333TR