Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3MAccessories
.100” × .100” seireS 6073/5073metsyS IME
Physical
* RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
Shell
Material:Die Cast Aluminum Alloy
Plating: 200 μ” [ 5.08μm] Minimum Nickel
Latch
Material:Stainless Steel
Plating: 100 μ” [ 2.54μm] Minimum Nickel
Cable Clamp
Material:Copper Alloy
Plating: 75 μ” [ 1.91μm] Minimum Nickel
Receptacle
Insulation Material:Glass Filled Polyester (PBT)
Flammability Rating: UL 94V-0
Ground Plate
Material:Copper Alloy
Plating: 100 μ” [ 2.54μm] Minimum Nickel
Retaining Clip
Material:Stainless Steel
Plating: 100 μ” [ 2.54μm] Minimum Nickel
Spring latch attachment allows quick, easy connect/
disconnect
Fits existing 3M™ connectors
Intra-cabinet grounding eliminates pigtails/
drain wires and need for grounding clamps
Cast aluminum shell offers excellent ground for
EMI/ ESD
RoHS* compliant
TS-0098-B
Sheet 1 of 4
Date Modified: July 18, 2008
DISCONTINUED
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M Accessories
.100 × .100 EMI System 3705/3706 Series
Position Dimensions
A B C D E F
20 1.69 [ 42.9 ] 1.50 [ 38.1 ] 0.39 [ 9.9 ] 1.26 [ 32.0 ] 1.65 [ 41.9 ] 0.35 [ 8.9 ]
26 1.99 [ 50.5 ] 1.80 [ 45.7 ] 0.43 [ 10.9 ] 1.26 [ 32.0 ] 1.65 [ 41.9 ] 0.35 [ 8.9 ]
34 2.39 [ 60.7 ] 2.20 [ 55.9 ] 0.47 [ 11.9 ] 1.32 [ 33.5 ] 1.71 [ 43.4 ] 0.47 [ 11.9 ]
40 2.69 [ 68.3 ] 2.50 [ 63.5 ] 0.51 [ 13.0 ] 1.32 [ 33.5 ] 1.71 [ 43.4 ] 0.47 [ 11.9 ]
50 3.19 [ 81.0 ] 2.80 [ 71.1 ] 0.59 [ 15.0 ] 1.38 [ 35.1 ] 1.77 [ 45.0 ] 0.47 [ 11.9 ]
60 3.69 [ 93.7 ] 3.30 [ 83.8 ] 0.67 [ 17.0 ] 1.38 [ 35.1 ] 1.77 [ 45.0 ] 0.47 [ 11.9 ]
Notes:
1.Two Shell Halves: Aluminum Alloy Die Casting, Plating-200μ″ [ 5.0 μm ] Nickel Min.
2.One Cable Clamp: Copper Alloy, Plating 75μ″ [ 2.0 μm ] Nickel Min.
3.Two Latches: Stainless Steel, Plating 100μ″ [ 2.54 μm ] Nickel Min.
4.Two Roundhead Screws: M3 x 0.5 mm x 4 mm long.
5.Two Flathead screws: M3 x 0.5 mm x 6 mm Long.
Note: Wiremount Shell Kit to be used with res pective Socket and Cable (Order Separately) TS-0098-B
Sheet 2 of 4
Ordering Information
3705-A2XX
Position: Se e Table
Shell Kit
.0 .00 .000
inch ±.1 ±.01 ±.005
[ ] Dim ensions fo r R eference
Only
Tolerance Unless Noted
[mm]
Inch
F
.43
[ 10.9 ]
V
V
V
V
V
V
4X R .18
[ 4.6 ]
.43
[ 10.9 ] See Note 1
C
For 34 position and
higher the shel l thickness
increases to the dashed
line (See table Dim F).
.35
[ 8.9 ]
A
See Note 2
2X (See Note 4)
D
E
2X (See Note 5)
B
2X (See Note 3)
DISCONTINUED
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M Accessories
.100 × .100 EMI System 3705/3706 Series
Position Dimensions
A B C D E
20 1.53 [ 38.9 ] 1.98 [ 50.3 ] 2.36 [ 59.9 ] 1.41 [ 35.8 ] 1.79 [ 45.5 ]
26 1.83 [ 46.5 ] 2.28 [ 57.9 ] 2.66 [ 67.6 ] 1.71 [ 43.4 ] 2.09 [ 53.1 ]
34 2.23 [ 56.6 ] 2.69 [ 68.3 ] 3.06 [ 77.7 ] 2.11 [ 53.6 ] 2.49 [ 63.2 ]
40 2.53 [ 64.3 ] 2.98 [ 75.7 ] 3.36 [ 85.3 ] 2.41 [ 61.2 ] 2.79 [ 70.9 ]
50 3.03 [ 77.0 ] 3.48 [ 88.4 ] 3.86 [ 98.0 ] 2.91 [ 73.9 ] 3.37 [ 85.6 ]
60 3.53 [ 89.7 ] 3.98 [ 101.1 ] 4.36 [ 110.7 ] 3.41 [ 86.6 ] 3.87 [ 98.3 ]
TS-0098-B
Sheet 3 of 4
.71
[ 18.0 ]
.32
[ 8.1 ]
Notes:
1.One Bracket: PBT, Flammability Rating: UL 94V-0.
2.Two Ground Plates: Copper Alloy, Plating-100 μ″ [ 2.54 μm ] Nickel Min.
3.Two Retaining Clips: Stainless Steel, Plating-100 μ″ [ 2.54 μm ] Nickel Min.
4.Two Roundhead Screws: M3 x 6mm Long.
5.Two Roundhead Screws: M3 x 0.5mm x 10mm Long. (For use with Plug Connector).
6.This is the recommended distance from the inside of th e panel to the front face of the Header or Plug.
Ordering Information
Note: Panel Mount Receptable Kit to be used with respective Plug or Header (Order Separately).
3706-50XX
Position: See Table
Receptacle Kit
C
B
A
2X (See Note 2)
4X M3 X 0.5mm
Threaded Inserts
.40 Ref
[ 10.2 ]
(See Note 6)
2X (See Note 3)
2X (See Note 4)
See Note 1
.37
[ 9.4 ] .70
[ 17.8 ]
2X (See Note 5)
2X Stop
D
E
DISCONTINUED
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M Accessories
.100 × .100 EMI System 3705/3706 Series
Position Dimensions
A B
20 1.80 [ 45.7 ] 1.98 [ 50.3 ]
26 2.10 [ 53.3 ] 2.28 [ 57.9 ]
34 2.50 [ 63.5 ] 2.69 [ 68.3 ]
40 2.80 [ 71.1 ] 2.98 [ 75.7]
50 3.30 [ 83.8 ] 3.48 [ 88.5 ]
60 3.80 [ 96.5 ] 3.98 [ 101.1 ]
Position 3705
Shell Kit
For use with:
(Order Separately) 3706
Mates with:
Receptacle Kit
For use with:
(Order Separately)
Socket Cable Header Plug
20 3705-A220 3421-7620 3659/20 3706-5020 2520-500X 4620-6000
26 3705-A226 3399-7626 3659/26 3706-5026 2526-500X 4626-6000
34 3705-A234 3414-7634 3659/34 3706-5034 2534-500X 4634-6000
40 3705-A240 3417-7640 3659/40 3706-5040 2540-500X 4640-6000
50 3705-A250 3425-7650 3659/50 3706-5050 2550-500X 4650-6000
60 3705-A260 3334-7660 3659/60 3706-5060 2560-500X 4660-6000
TS-0098-B
Sheet 4 of 4
Note:
Shell and Receptacle Kits are availabl e. T hey consist of a complete Shell Kit and a complete Receptacle Kit for a respective pin count.
A
B
.13
[ 3.3 ]
R Full Typ
.49
[ 12.4 ]
R .008 Typ
[ 0.20 ]
.50 Min
[ 12.7 ]
.75 Min
[ 19.1 ]
R .063 Typ
[ 1.60 ]
Recommended Panel Cut
Out for Receptacle Ki t.
DISCONTINUED
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by
EU Court of Justice Decision 2008/C 116/04
This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished
products subject to EU RoHS that are placed on the EU market after June 30, 2008.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.
RIA-2217A-E
DISCONTINUED
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the
product or part does not contain any of the following substances in excess of the following maximum concentration values in any
homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated
diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain
Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3Ms Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217A-E
DISCONTINUED
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the
legal theory asserted.
Please recycle. Printed in USA.
© 3M 2008. All rights reserved.
RIA-2217A-E
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects 3M is a trademark of 3M Company.
Appendix C3: China RoHS
Electronic Industry Standard of the Peoples Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or
polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3Ms Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
DISCONTINUED