High Collector-emitter Voltage Type Photocoupler H11D1 Series Features Package Dimensions Current transfer ratio ( CTR : MIN. 20% at IF = 10mA, VCE = 10V ) High isolation voltage between input and output ( VISO = 5,000 Vrms ) High collector-emitter breakdown voltage ( BVCER = 300V) UL approved ( No. E113898 ) VDE approved ( No. 094722 ) CSA approve in progress Options Available : - Leads with 0.4" (10.16mm) Spacing (M Type) - Lead Bends for Surface Mounting (S Type) - Tape and Reel of Type I for SMD (Add "-TA" Suffix) - Tape and Reel of Type II for SMD (Add "-TA1" Suffix) - VDE 0884 Approvals (Add "-V" Suffix) Applications 1. Copy Machines 2. Interfacing and coupling systems of different potentials and impedances 3. Monitor and detection circuits 4. Solid state relays NOTES : 1. Year date code. 2. 2-digit work week. 3. Factory code shall be marked (Z Taiwan, Y Thailand). 4. All dimensions are in millimeters (inches). 5. Tolerance is 0.25mm (.010") unless otherwise noted. 6. Specifications are subject to change without notice. Ordering Information Part Number 12-162 Package Safety Standard Approval H11D1 H11D1M H11D1S H11D1S-TA H11D1S-TA1 6-pin DIP 6-pin (leads with 0.4" spacing) 6-pin (lead bends for surface mount) 6-pin (tape and reel packaging of type I) 6-pin (tape and reel packaging of type II) UL approved H11D1-V H11D1M-V H11D1S-V H11D1STA-V H11D1STA1-V 6-pin DIP 6-pin (leads with 0.4" spacing) 6-pin (lead bends for surface mount) 6-pin (tape and reel packaging of type I) 6-pin (tape and reel packaging of type II) VDE approved Application part number H11D1 CSA approve in progress H11D1 Ratings and Characteristics Absolute Maximum Ratings (Ta=25 Symbol Rating Unit Forward Current IF 60 mA Reverse Voltage VR 6 V Power Dissipation P 100 mW Collector-Emitter Voltage VCEO 300 V Emitter-Collector Voltage VECO 7 V Collector-Base Voltage VCBO 300 V Emitter-Base Voltage VEBO 7 V IC 100 mA mW Parameter Input Output Collector Current PC 150 Ptot 250 mW V iso 5,000 Vrms Operating Temperature Topr -55~+100 Storage Temperature Tstg -55~+150 Tsol 260 Collector Power Dissipation Total Power Dissipation *1.Isolation Voltage *2.Soldering Temperature ) *1. AC for 1 minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 seconds Electrical / Optical Characteristics Typ. Max. unit VF 1.2 1.5 V Reverse Current IR 0.01 10 A Terminal Capacitance Ct 30 250 pF V=0, f=1KHz 100 nA VCE=200V, RBE=1M IC=0.1mA, IF=0 RBE=1M IE=10 A IF=0mA Forward Voltage Input Collector Dark Current Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector Current Output Transfer Characteristics IC *1. CTR= I F *1 Current Transfer Ratio Collector-emitter Saturation Voltage Symbol Min. I CER 300 V BVECO 7 V IC 2 mA CTR 20 % 0.25 5 10 0.4 Conditions IF=10mA BVCER V CE(sat) ) V 10 VR=6V IF=10mA VCE=10V RBE=1M IF=10mA, IC=0.5mA RBE=1M DC500V 40~60% R.H. V=0, f=1MHz Isolation Resistance R iSO Floating Capacitance Cf 0.6 Response Time (Rise) tr 5 s VCC=10V, IC=2mA Response Time (Fall) tf 5 s RL=100 pF PHOTOCOUPLER Parameter (Ta=25 100% 12-163 Typical Electrical/Optical Characteristic Curves (25 Ambient Temperature Unless Otherwise Noted) 12-164 12-165 PHOTOCOUPLER