12-162
High Collector-emitter Voltage Type
Photocoupler
H11D1 Series
H11D1
H11D1M
H11D1S
H11D1S-TA
H11D1S-TA1
H11D1-V
H11D1M-V
H11D1S-V
H11D1STA-V
H11D1STA1-V
Part Number Package Safety Standard Approval Application part
number
6-pin DIP
6-pin (leads with 0.4" spacing)
6-pin (lead bends for surface mount)
6-pin (tape and reel packaging of type I)
6-pin (tape and reel packaging of type II)
6-pin DIP
6-pin (leads with 0.4" spacing)
6-pin (lead bends for surface mount)
6-pin (tape and reel packaging of type I)
6-pin (tape and reel packaging of type II)
H11D1
H11D1
UL approved
CSA approve in progress
VDE approved
Features
Current transfer ratio
( CTR : MIN. 20% at IF = 10mA, VCE = 10V )
High isolation voltage between input and output
( VISO = 5,000 Vrms )
High collector-emitter breakdown voltage
( BVCER = 300V)
UL approved ( No. E113898 )
VDE approved ( No. 094722 )
CSA approve in progress
Options Available :
- Leads with 0.4" (10.16mm) Spacing (M Type)
- Lead Bends for Surface Mounting (S Type)
- Tape and Reel of Type I for SMD (Add "-TA" Suffix)
- Tape and Reel of Type II for SMD (Add "-TA1" Suffix)
- VDE 0884 Approvals (Add "-V" Suffix)
Applications
1. Copy Machines
2. Interfacing and coupling systems of different potentials
and impedances
3. Monitor and detection circuits
4. Solid state relays
Package Dimensions
NOTES :
1. Year date code.
2. 2-digit work week.
3. Factory code shall be marked (Z Taiwan, Y Thailand).
4. All dimensions are in millimeters (inches).
5. Tolerance is 0.25mm (.010") unless otherwise noted.
6. Specifications are subject to change without notice.
Ordering Information
PHOTOCOUPLER
12-163
Ratings and Characteristics
Absolute Maximum Ratings (Ta=25 )
Input
Output
Total Power Dissipation
*1.Isolation Voltage
Operating Temperature
Storage Temperature
*2.Soldering Temperature
Parameter
mA
V
mW
V
V
V
V
mA
mW
mW
Vrms
60
6
100
300
7
300
7
100
150
250
5,000
-55~+100
-55~+150
260
IF
VR
P
VCEO
VECO
VCBO
VEBO
IC
PC
Ptot
Viso
Topr
Tstg
Tsol
Symbol Rating Unit
Forward Current
Reverse Voltage
Power Dissipation
Collector-Emitter Voltage
Emitter-Collector Voltage
Collector-Base Voltage
Emitter-Base Voltage
Collector Current
Collector Power Dissipation
Forward Voltage
Reverse Current
Terminal Capacitance
Collector Dark Current
Collector-Emitter
Breakdown Voltage
Emitter-Collector
Breakdown Voltage
Collector Current
*1 Current Transfer Ratio
Collector-emitter
Saturation Voltage
Isolation Resistance
Floating Capacitance
Response Time (Rise)
Response Time (Fall)
Parameter Symbol Min. Typ. Max. unit Conditions
*1. CTR= 100%
IC
IF
Input
Output
Transfer
Characteristics
IF=10mA
VR=6V
V=0, f=1KHz
VCE=200V, RBE=1M
IC=0.1mA, IF=0
RBE=1M
IE=10 A
IF=0mA
IF=10mA VCE=10V
RBE=1M
IF=10mA, IC=0.5mA
RBE=1M
DC500V
40~60% R.H.
V=0, f=1MHz
VCC=10V, IC=2mA
RL=100
V
A
pF
nA
V
V
mA
%
V
pF
s
s
1.5
10
250
100
0.4
1.2
0.01
30
0.25
0.6
5
5
300
7
2
20
51010
VF
IR
Ct
ICER
BVCER
BVECO
IC
CTR
VCE(sat)
RiSO
Cf
tr
tf
*1. AC for 1 minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave.
*2. For 10 seconds
Electrical / Optical Characteristics (Ta=25 )
12-164
Typical Electrical/Optical Characteristic Curves
(25 Ambient Temperature Unless Otherwise Noted)
PHOTOCOUPLER
12-165
