www.vishay.com For technical questions, contact: thinfilm@vishay.com Document Number: 60023
62 Revision: 19-May-10
P-NS
Vishay Thin Film
Commercial Thin Film Resistor, Surface Mount Chip
For applications requiring low noise, stability, low
temperature coefficient of resistance, and low voltage
coefficient, all Vishay’s proven precision thin film
wraparound resistors will meet your exact requirements.
Manufactured with the same material and processes as QPL
and manufactured in a QPL facility.
CONSTRUCTION
FEATURES
• Moisture resistant (SPM) special passivation
method
• Non-standard values available
• Pre-tinned terminations over nickel barrier
(gold available)
•
Very low noise and voltage coefficient (< - 35 dB, 0.1 ppm/V)
• Non-inductive
• Laser-trimmed tolerances to 0.02 %
• In-lot tracking less than 5 ppm/°C
• Epoxy bondable termination available
• Compliant to RoHS directive 2002/95/EC
TYPICAL PERFORMANCE
Notes
(1) 0705 and 0805 are the same (only use 0805 when ordering)
(2) Values > 1M best TCR ± 25 ppm/°C
Actual Size
0505
Adhesion Layer
High Purity
Alumina Substrate
Nickel Barrier
Solder
Coating
Passivated Nichrome
Resistive Film
SPM Passivation
Enhancement
ABSOLUTE
TCR 25
TOL. 0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
Material Passivated nichrome -
Resistance Range 10 Ω to 6.19 MΩ-
TCR: Absolute ± 10 ppm/°C to 100 ppm/°C - 55 °C to + 125 °C
Tolerance: Absolute ± 0.02 % to ± 5 % + 25 °C
Stability: Absolute ΔR ± 0.02 % 2000 h at 70 °C
Stability: Ratio --
Voltage Coefficient 0.1 ppm/V (typical) -
Working Voltage 75 V to 200 V -
Operating Temperature Range - 55 °C to + 125 °C -
Storage Temperature Range - 55 °C to + 150 °C -
Noise < - 35 dB (typical) -
Shelf Life Stability: Absolute ΔR ± 0.01 % 1 year at + 25 °C
COMPONENT RATINGS
CASE SIZE (1) POWER RATING
(mW)
WORKING VOLTAGE
(V)
RESISTANCE RANGE (Ω)
≥ 0.1 % < 0.1 %
0402 50 75 25 to 100K 250 to 100K
0502 100 75 20 to 150K 250 to 150K
0505 150 75 20 to 301K 250 to 301K
0603 150 75 10 to 261K 250 to 261K
0705 250 100 10 to 475K 250 to 475K
0805 250 100 10 to 475K 250 to 475K
1005 250 100 10 to 649K 250 to 649K
1010 500 150 50 to 1M 250 to 1M
1206 400 200 10 to 1.5M (2) 250 to 1M
1505 400 150 10 to 1M 250 to 1M
2208 800 150 10 to 3.16M (2) 250 to 1M
2010 800 200 10 to 4.02M (2) 250 to 1M
2512 1000 200 10 to 6.19M (2) 250 to 1M
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 60023 For technical questions, contact: thinfilm@vishay.com www.vishay.com
Revision: 19-May-10 63
P-NS
Commercial Thin Film Resistor,
Surface Mount Chip Vishay Thin Film
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
DIMENSIONS in inches
CASE SIZE TERM L W T D E
0402 B 0.042 ± 0.008 0.022 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.010 ± 0.005
0502 B 0.055 ± 0.006 0.025 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005
0505 B 0.055 ± 0.006 0.050 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005
0603 B 0.064 ± 0.006 0.032 ± 0.005 0.020 max. 0.012 ± 0.005 0.015 ± 0.005
0705, 0805 (1) B 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.016 ± 0.008 0.015 ± 0.005
1005 B 0.105 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
1010 B 0.105 ± 0.007 0.100 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
1206 B 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010
1505 B 0.155 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
2010 B 0.209 ± 0.009 0.098 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
2208 B 0.230 ± 0.007 0.075 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
2512 B 0.259 ± 0.009 0.124 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
D
W
L
T
E
ENVIRONMENTAL TESTS
ENVIRONMENTAL TEST 10 kΩ ΔR
± (%)
100 kΩ ΔR
± (%)
Thermal Shock 0.02 0.02
Short Time Overload 0.01 0.01
Low Temperature Operation 0.01 0.01
Resistance to Solder Heat 0.04 0.03
Moisture Resistance 0.02 0.01
High Temperature Exposure 0.03 0.06
Load Life (10 000 h, + 70 °C) 0.05 0.05
TCR ± 25 ppm/°C ± 25 ppm/°C
DERATING CURVE
Ambient Temperature °C
0 70 125 150
0
20
40
60
80
100
Precent of Rated Power
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: P-1206E1002BBTS
GLOBAL
MODEL
CASE
SIZE
TCR
CHARACTERISTIC RESISTANCE TOLERANCE TERMINATION PACKAGING
P- 0402
0502
0505
0603
0805
1005
1010
1206
1505
2208
2010
2512
Y = ± 10 ppm/°C (2)
D = ± 15 ppm/°C
E = ± 25 ppm/°C
H = ± 50 ppm/°C
K = ± 100 ppm/°C
Note
(2) > 250 Ω
The first 3 digits
are significant
figures and the
last digit specifies
the number of
zeros to follow.
“R” designates
the decimal point.
Example:
10R0 = 10 Ω
1001 = 1 kΩ
1002 = 10 kΩ
Q = ± 0.02 % (3)
A = ± 0.05 % (3)
B = ± 0.1 %
D = ± 0.5 %
F = ± 1 %
G = ± 2 %
J = ± 5 %
Note
(3) For values
≥ 250 Ω
B = Wraparound
Sn/Pb solder
63 % Sn/37 % Pb
w/ nickel barrier
G = Wraparound Au
over Ni (gold)
termination
epoxy bondable
RoHS compliant - e4
S = Wraparound lead
(Pb)-free solder
96.5 % Sn/3.0 % Ag/
0.5 % Cu
RoHS compliant - e1
BS =BULK
100 min., 1 mult
WS =WAFFLE
100 min., 1 mult
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (4)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 100 min., 1 mult
Note
(4) Preferred packaging code
Historical Part Number Example: P0805H6801BBT (for reference purposes only)
P 0805 H 6801 B B T
STYLE CASE SIZE TCR
CHARACTERISTIC OHMIC VALUE TOLERANCE TERMINATION PACKAGING
06E1 02B021 BTSP-
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
