TgardTM 5000 Series Thermally Conductive Insulators THERMALLY CONDUCTIVE ELECTRICALLY INSULATIVE MATERIAL TgardTM 5000 is an excellent dielectric material with good thermal performance consisting of a polyimide film coated with a ceramic-filled, high-temperature silicone rubber. Tgard 5000 is ideal for applications that require a delta temperature across the interface of 2.0C/watt or higher on a TO-220 clip mounted @ 50 psi pressure. Tgard 5000 has high dielectric strength for the AC side of a switching mode power supply. Tgard 5000 is tough resulting in an exceptional cut-through resistant material. Americas: +1.847 839.6907 IAS-AmericasEastSales@lairdtech.com Europe: +44.1628.858941 IAS-EUSales@lairdtech.com Asia: ++86.21.5855.0827.127 IAS-AsiaSales@lairdtech.com CLV-customerservice@lairdtech.com www.lairdtech.com/thermal FEATURES AND BENEFITS APPLICATIONS * High dielectric breakdown voltage of 6,000 volts * Film base resistance cut through * Thermal resistance of 0.40C-in2/watt @ 50 psi clip pressure * Thermal resistance of 0.23C-in2/watt @ 400 psi screw pressure * Switching mode power supplies * Electrial power generators * UPS units TgardTM 5000 Series Thermally Conductive Insulators PROPERTIES TEST METHOD METRIC VALUES IMPERIAL VALUES Dielectric withstand voltage 50mm probe for 30 sec ASTM D149 4,500 volts DC 4,500 volts DC Dielectric breakdown voltage 50mm probe ASTM D149 Avg >6,000 volts AC Avg >6,000 volts AC Volume resistivity ASTN D257 1012 ohm-cm 1012 ohm-in Dielectric constant @1Mhz ASTN D257 3.4 3.4 0.127 mm 5 mils ELECTRICAL PROPERTIES MECHANICAL PROPERTIES Thickness Hardness ASTM D2240 75 Shore A 75 Shore A Tensile strength ASTM D412 33.1 Mpa 4.8 Kpsi Elongation along width or length ASTM D412 45% 45% -60 to 180C -76 to 356F Tan Tan V-0 V-0 Operating temperature range Color UL flammability rating PRESSURE UL 94 UNITS 10 (69) 25 (172) 50 (345) Modified ASTM D5470 C-in2/watt Modified ASTM D5470 100 (689) 200 (1379) 400 (2758) TOTAL THERMAL RESISTANCE T0-220 Configurations available: Standard options: Standard die cut parts: Custom die cut parts: 0.62 0.51 0.40 0.27 0.25 0.23 2 C-cm /watt 4.0 3.29 2.58 2.06 1.61 1.48 C/watt 1.31 1.00 0.82 0.65 0.58 0.54 * Sheet form, roll form and die-cut parts * Single-side, pressure-sensitive adhesive on request * Without adhesive (A0): 12 x 18" sheets, 12" x 65M, 12" x 30M roll or custom configuration * With adhesive (A1): 11.75 x 18" sheets, 11.75" x 30M roll or custom configuration Standard part sizes for TO-220, TO-247, TO-3P, TO-3PL and TO-264 Custom configurations available with standard tolerance of 0.5mm (0.020"). Ability to handle drawings in multiple file formats. (.DXF and .DWG preferred) Data for design engineer guidance only. Observed performance varies in application. Engineers are reminded to test the material in application. THR-DS-Tgard-5000_032515 Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Technologies' Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. (c) Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights. Document A 15984-00 03/2015 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Laird Technologies: A15421-03 A15435003 A15440006 A15036003 A15430003 A15037003 A15038003 A15437003 A15428003 A15436006 A15433003 A15431003 A15434003 A15432003 A15421-05 A15434103 A15428103 A15436103 A15441103 A15440005 A15441003 A15427103 A15432103 A15037103 A15038103 A15437103 A15436003 A15435103 A15440103 A15430103 A15036103 A15433103 A15431103 A15427003