ACDC 40100 Watts ECM Series xppower.com * Compact Size * IT & Medical Approvals * Convectioncooled * Class I and II Construction * DC Input Version Available (DCM Series) * PoE Isolation Version Available (POE Series) * 3 Year Warranty Specification Input * 90-264 VAC (120-370 VDC) * 47-63 Hz; 440 Hz* * 40 W: 0.4 A max at 230 VAC 60 W: 0.6 A max at 230 VAC 100 W: 0.9 A max at 230 VAC Inrush Current * 40 A max at 230 VAC Earth Leakage Current * <125 A at 115 VAC/60 Hz <210 A at 230 VAC/50 Hz Power Factor * EN61000-3-2 Input Protection * Internal T3.15 A, 250 V fuse in line and neutral Input Voltage Input Frequency Input Current Output * See tables * 5% on 3.3 V & 5 V versions, 10% on other single output models and V1 of multi-output models. (See note 1 for ECM40/60 models) Initial Set Accuracy * 1.0% V1, 5% V2, V3 & V4 Minimum Load * See tables Start Up Delay * 1.5 s max Start Up Rise Time * 10 ms max Hold Up Time * 16/75 ms min at 115/230 VAC Line Regulation * 0.5% Load Regulation * 1% single output models; 3% V1, 5% V2 & V3 ECM40/60 multi-output models. 1% V1 & V2, 5% V3 & V4 ECM100 Cross Regulation * 2% on ECM40/60 only Over/Undershoot * None at turn on/off Transient Response * 4% max. deviation, recovery to within 1% in 500 s for a 25% load change Ripple & Noise * 1% pk-pk, 20 MHz bandwidth Overvoltage Protection * 115-135% Vnom, recycle input to reset Overload Protection * 110-150% on primary power limit, auto recovery Short Circuit Protection * Trip and restart (hiccup mode) Temperature * 0.05%/C Coefficient Peak Load * 120% for 100 ms ECM40/60 (see note 3) Output Voltage Output Voltage Trim * Safety approvals cover frequency range 47-63 Hz General Efficiency Isolation Switching Frequency Power Density MTBF * 80-85% depending on model * 4000 VAC Input to Output 2 x MOPP ECM100 single output models, 1 x MOPP ECM100 multi output and all ECM40/60 models (contact sales for 2 x MOPP), 1500 VAC Input to Ground 1 x MOPP, 500 VAC Output to Ground * 70 kHz typical * 40 W: 4.2 W/In3 60 W: 6.3 W/In3 100 W: 7.4 W/In3 * 600 kHrs to MIL-HDBK-217F at 25 C, GB Environmental Operating Temperature * 0 C to +70 C. Refer to derating curves for specific operating limitations. Cooling * Convection & fan-cooled ratings (see derating curves) Operating Humidity * 95% RH, non-condensing Storage Temperature * -40 C to +85 C Operating Altitude * 3000 m Shock * 30 g pk, half sine, 6 axes Vibration * 2 g rms, 5 Hz to 500 Hz, 3 axes EMC & Safety Emissions Harmonic Currents Voltage Flicker ESD Immunity Radiated Immunity EFT/Burst Surge Conducted Immunity Dips & Interruptions Safety Approvals * EN60601-1-2, EN61204-3, FCC 20780, EN55022 & EN55011, level B conducted EN55022 Level A radiated * EN61000-3-2, class A * EN61000-3-3 * EN61000-4-2, level 3 Perf Criteria A * EN61000-4-3, 10 V/m Perf Criteria A * EN61000-4-4, level 3 Perf Criteria A * EN61000-4-5, level 3 Perf Criteria A, SEMI F47 * EN61000-4-6, 10 V Perf Criteria A * EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms, Perf Criteria A, B, B EN60601-1, 30% 500 ms, 60% 100 ms, 100% 10 ms, 100% 5000 ms, Perf Criteria A, A (with 50% load), A, B * EN60601-1, ANSI/AAMI ES60601-1, CSA22.2 No.60601-1 per cUL, Including Risk Management, EN60950-1, UL60950-1 Output 1 Output Power Voltage 5.0 7.0 9.0 12.0 15.0 18.0 24.0 33.0 48.0 +5.0 +5.0 +5.0 +5.0 +5.0 +3.3 +5.0 40 W Output 2 Current Min/Max(3) 0.0 A/8.0 A 0.0 A/5.7 A 0.0 A/4.4 A 0.0 A/3.5 A 0.0 A/2.7 A 0.0 A/2.2 A 0.0 A/1.7 A 0.0 A/1.2 A 0.0 A/0.9 A 0.5 A/6.0 A 0.5 A/6.0 A 0.5 A/6.0 A 0.5 A/6.0 A 0.5 A/6.0 A 0.5 A/6.0 A 0.5 A/6.0 A V V V V V V V V V V V V V V V V Voltage +12.0 +15.0 +12.0 +24.0 +15.0 +5.0 +3.3 Output 3 Current Min/Max V V V V V V V 0.1 0.1 0.1 0.1 0.1 0.1 0.1 A/2.0 A/1.5 A/2.0 A/1.0 A/1.5 A/1.5 A/1.5 A A A A A A A -12.0 -12.0 -15.0 +12.0 +12.0 Model Number(2) Current Min/Max Voltage V V V V V 0.0 0.0 0.0 0.0 0.0 A/0.5 A/0.5 A/0.5 A/0.5 A/0.5 ECM40US05 ECM40US07 ECM40US09 ECM40US12 ECM40US15 ECM40US18 ECM40US24 ECM40US33 ECM40US48 ECM40UD21 ECM40UD22 ECM40UT31 ECM40UT32 ECM40UT33 ECM40UT34 ECM40UT35 A A A A A Notes 1. V2 will track a change in V1 by the same percentage change in voltage as V1 is trimmed. 2. To receive unit with cover fitted, add suffix `-C' to model number. For Class I operation only. 3. A 120% peak load can be taken for up to 100 ms with a 25% duty cycle. Average load not to exceed 40 W. Mechanical Details 4.00 (101.6) 3.75 (95.25) Input Connector J1 Pin 1 Line Pin 2 Neutral 1.20 (30.5) J1 mates with Molex housing 43061-0003 & Molex series 5194 crimp terminals Ground tab (0.25 faston) standard 1 2.00 (50.8) J2 1.75 (44.45) 6 Pin 1 2 3 4 5 6 0.25 x 0.32 faston ground tab V Adj. 4 x o0.156 (3.96) mounting holes o0.312 (7.92) clearance top and bottom 0.14 (3.5) SMD component height Output Connector J2 Single Multi V1 +V1 V1 +V1 RTN RTN RTN RTN NC V3 NC +V2 J2 mates with Molex housing 43061-0006 & Molex series 5194 crimp terminals Notes 1. All dimensions in inches (mm). Tolerance .xx = 0.02 (0.50); .xxx = 0.01 (0.25) 2. Weight: approx. 0.33 lbs (150 g) 3. Cable harnessess with 300 mm wire available. For single output models, order part number ECM40/60S LOOM. For multi-output models, order part number ECM40/60DT LOOM^. 4. Mating connector kit available. Order part number ECM40/60 CONKIT. 5. Covers available. Order part number ECM40/60 COVER^. Cover dimensions are 4.49 x 2.52 x 1.52 (114 x 64 x 38.5) 6. 3D drawing files available from www.xppower.com/cad.php. Derating Curves All ECM40 models with 5 CFM 100% 100% 75% 75% Output Power Output Power All ECM40 models convectioncooled 50% 25% 50% 25% 0% 0% 0 10 20 30 40 Ambient Temp (C) 50 60 70 80 0 Note: Derate by 10% if cover is fitted 10 20 30 40 Ambient Temp (C) Consult longform datasheet for installation information regarding optimum thermal ratings in convection-cooled applications. 50 60 70 80 ACDC ECM40 Models and Ratings Output 1 Output Power 5.0 7.0 9.0 12.0 15.0 18.0 20.0 24.0 28.0 33.0 48.0 +5.0 +5.0 +5.0 +5.0 +5.0 +3.3 +5.0 Output 2 Current Min/Max(3) 0.0 A/12.00 A 0.0 A/8.60 A 0.0 A/6.70 A 0.0 A/5.00 A 0.0 A/4.00 A 0.0 A/3.30 A 0.0 A/3.00 A 0.0 A/2.50 A 0.0 A/2.14 A 0.0 A/1.80 A 0.0 A/1.25 A 0.5 A/8.00 A 0.5 A/8.00 A 0.5 A/8.00 A 0.5 A/8.00 A 0.5 A/8.00 A 0.5 A/8.00 A 0.5 A/8.00 A Voltage 60 W V V V V V V V V V V V V V V V V V V Voltage +12.0 +15.0 +12.0 +24.0 +15.0 +5.0 +3.3 Output 3 Current Min/Max V V V V V V V 0.1 0.1 0.1 0.1 0.1 0.1 0.1 A/3.0 A/2.5 A/3.0 A/1.5 A/2.5 A/1.5 A/1.5 A A A A A A A Model Number(2) Current Min/Max Voltage -12.0 V -12.0 V -15.0 V +12.0 V +12.0 V 0.0 0.0 0.0 0.0 0.0 A/0.5 A/0.5 A/0.5 A/0.5 A/0.5 A A A A A ECM60US05 ECM60US07 ECM60US09 ECM60US12 ECM60US15 ECM60US18 ECM60US20 ECM60US24 ECM60US28 ECM60US33 ECM60US48 ECM60UD21 ECM60UD22 ECM60UT31 ECM60UT32 ECM60UT33 ECM60UT34 ECM60UT35 Notes 1. V2 will track a change in V1 by the same percentage change in voltage as V1 is trimmed. 2. To receive unit with cover fitted, add suffix `-C' to model number. For Class I operation only. 3. A 120% peak load can be taken for up to 100 ms with a 25% duty cycle. Average load not to exceed 60 W. Mechanical Details Input Connector J1 Pin 1 Line Pin 2 Neutral 4.00 (101.6) 3.75 (95.25) 1.20 (30.5) J1 mates with Molex housing 43061-0003 & Molex series 5194 crimp terminals. Ground (0.25 faston) tab standard. 1 2.00 (50.8) J2 1.75 (44.45) Pin 1 2 3 4 5 6 6 0.25 x 0.32 faston ground tab V Adj. 4 x o0.156 (3.96) mounting holes o0.312 (7.92) clearance top and bottom Output Connector J2 Single Multi V1 +V1 V1 +V1 RTN RTN RTN RTN NC V3 NC +V2 J2 mates with Molex housing 43061-0006 & Molex series 5194 crimp terminals. 0.14 (3.5) SMD component height Notes 1. All dimensions in inches (mm). Tolerance .xx = 0.02 (0.50); .xxx = 0.01 (0.25) 2. Weight: 0.33 lbs (150 g) approx. 3. Cable harnesses with 300 mm wire available. For single output models, order part number ECM40/60S LOOM. For multi-output models, order part number ECM40/60DT LOOM. Derating Curves 4. Mating connector kit available. Order part number ECM40/60 CONKIT. 5. Covers available. Order part number ECM40/60 COVER^. Cover dimensions are 4.49 x 2.52 x 1.52 (114 x 64 x 38.5). 6. Selected single output models available in a 3" x 5" footprint for OEM quantities. Contact sales for details. 7. 3D drawing files available from www.xppower.com/cad.php. All ECM60 models convectioncooled All ECM60 models with 5 CFM 100% Output Power 100% Output Power ACDC ECM60 Models and Ratings 75% 50% 25% 75% 50% 25% 0% 0% 0 10 20 30 40 Ambient Temp (C) 50 60 70 80 0 Note: Derate by 10% if cover is fitted 10 20 30 40 50 Ambient Temp (C) Consult longform datasheet for installation information regarding optimum thermal ratings in convection-cooled applications. 60 70 80 ACDC ECM100 Models and Ratings Single Output Models Output Voltage 3.3 V 5.0 V 7.0 V 9.0 V 12.0 V 15.0 V 18.0 V 24.0 V 28.0 V 33.0 V 48.0 V Output Current Maximum 15.0 A 15.0 A 11.4 A 8.8 A 7.5 A 6.0 A 5.0 A 4.1 A 3.6 A 3.0 A 2.1 A Minimum 0.0 A 0.0 A 0.0 A 0.0 A 0.0 A 0.0 A 0.0 A 0.0 A 0.0 A 0.0 A 0.0 A Model Number(1) with 5 CFM Cooling 20.0 A 20.0 A 14.3 A 11.1 A 8.3 A 6.6 A 5.5 A 4.1 A 3.6 A 3.0 A 2.1 A ECM100US03 ECM100US05 ECM100US07 ECM100US09 ECM100US12 ECM100US15 ECM100US18 ECM100US24 ECM100US28 ECM100US33 ECM100US48 Multi Output Models Output Power Convection Forced Air Cooled 5 CFM 80 W 100 W 80 W 100 W 75 W 100 W 80 W 100 W 80 W 100 W 65 W 100 W 70 W 100 W 80 W 100 W 70 W 100 W 65 W 100 W 60 W 100 W 80 W 100 W 80 W 100 W 80 W 100 W 80 W 100 W Output 1 Current Voltage Min/Max +5.0 V 0.0 A/12.0 A +5.0 V 0.0 A/12.0 A +5.0 V 0.5 A/10.0 A +5.0 V 0.5 A/10.0 A +5.0 V 0.5 A/10.0 A +3.3 V 0.5 A/10.0 A +5.0 V 0.5 A/10.0 A +5.0 V 0.5 A/10.0 A +5.0 V 0.5 A/10.0 A +5.0 V 0.5 A/10.0 A +3.3 V 0.5 A/10.0 A +5.0 V 0.5 A/10.0 A +5.0 V 0.5 A/10.0 A +5.0 V 0.5 A/10.0 A +5.0 V 0.5 A/10.0 A Output 2 Current Voltage Min/Max +12.0 V 0.0 A/3.0 A +15.0 V 0.0 A/3.0 A +12.0 V 0.0 A/3.0 A +24.0 V 0.0 A/2.0 A +15.0 V 0.0 A/3.0 A +5.0 V 0.0 A/5.0 A +3.3 V 0.0 A/5.0 A +12.0 V 0.0 A/3.0 A +15.0 V 0.0 A/3.0 A +3.3 V 0.1 A/5.0 A +5.0 V 0.1 A/5.0 A +24.0 V 0.1 A/2.0 A +24.0 V 0.1 A/2.0 A +12.0 V 0.1 A/3.0 A +15.0 V 0.1 A/3.0 A Output 3 Current Voltage Min/Max -12.0 -12.0 -15.0 +12.0 +12.0 -5.0 -5.0 +12.0 +12.0 +12.0 +15.0 -12.0 -15.0 V V V V V V V V V V V V V 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 A/0.8 A/0.8 A/0.8 A/0.8 A/0.8 A/0.8 A/0.8 A/0.8 A/0.8 A/0.8 A/0.8 A/0.8 A/0.8 Output 4 Current Voltage Min/Max A A A A A A A A A A A A A -12.0 -12.0 -12.0 -15.0 -5.0 -5.0 V V V V V V 0.0 0.0 0.0 0.0 0.0 0.0 A/0.5 A/0.5 A/0.5 A/0.5 A/0.5 A/0.5 Model Number(1) ECM100UD21 ECM100UD22 ECM100UT31 ECM100UT32 ECM100UT33 ECM100UT34 ECM100UT35 ECM100UT36 ECM100UT37 ECM100UQ41 ECM100UQ42 ECM100UQ43 ECM100UQ44 ECM100UQ45 ECM100UQ46 A A A A A A Notes 1. To receive unit with cover fitted, add suffix `-C' to model number. For Class I operation only. 2. Output 3 available with opposite polarity for OEM quantities. Mechanical Details 0.12 (3.2) 4.25 (107.9) 1.20 (30.5) J1 mates with Molex housing 43061-0003 and Molex series 5194 crimp terminals. Ground (0.25 faston) tab standard. J1 Pin 1 2 3 4 5 6 7 8 9 10 11 12 2 1 J2 2.10 (53.3) 1.27 (32.2) 12 1.25 (3.2) Output Connector J2 Single V1 V1 V1 V1 V1 RTN V1 RTN V1 RTN V1 RTN NOT USED NOT USED NOT USED NOT USED 1 2.25 (57.1) 2.50 (63.5) Input Connector J1 Line Neutral Pin 1 Pin 2 4.50 (114.3) 0.20 (5.1) V Adj. 0.25 faston ground tab 4X o0.16 (4.0) mounting holes o0.31 (7.9) clearance top and bottom 0.14 (3.5) SMD component height 0.20 (5.1) Cover dimensions are 4.98 x 3.01 x 1.54 (126.5 x 76.4 x 39.0) Notes 1. All dimensions in inches (mm). Tolerance .xx = 0.02 (0.50); .xxx = 0.01 (0.25) 2. Weight: 0.4 lbs (180 g) approx. 3. Cable harnessess with 300 mm wire available. For single output models, order part number ECM100S LOOM. For multi-outputs (dual and triple output only), p/n ECM100DT LOOM. Multi +V1 +V1 +V1 +V1 RTN RTN RTN RTN +V2 +V2 V3 -V4 J2 mates with Molex housing 43061-0012 and Molex series 5194 crimp terminals. 4. Mating connector kit available for single output models. Order part number ECM100S CONKIT^. 5. Covers available. Order part number ECM100 COVER^. 6. Available in a 3" x 5" footprint for OEM quantities. Contact sales for details. 7. 3D drawing files available from www.xppower.com/cad.php. Derating Curves Output Power (W) 100 B A US24-48 A 80 B US12-18 C 60 C US05 D 40 D US03 20 Note: 1. Derate by 10% if cover is fitted. 2. For multi output convectioncooled operation above +50 C derate linearly to 50% at +70 C. All ECM100 models with 5 CFM Output Power All ECM100 single output models convectioncooled 100% 75% 50% 25% 0% 0 0 10 20 30 40 50 60 70 80 0 10 Ambient Temp (C) Consult longform datasheet for installation information regarding optimum thermal ratings in convection-cooled applications. 20 30 40 50 Ambient Temp (C) 60 70 80 Input Voltage Range(1) Input Current UVLO Output Voltage Min(6) 36-76 VDC (48 VDC Nominal) 1.5 A (2.5 A max) 2.2 A (3.5 A max) 32 - 35 VDC 12 V 12 V 0.25 A 0.40 A Notes 1. Can be configured as -48 VDC input. 2. Input reverse voltage protection is continuous with automatic recovery. 3. Input transients compliant with ETSI EN300 132:2003. Output Current Max Convection -cooling 5.00 A 7.50 A Max - 5CFM forced -cooling 5.00 A 8.30 A Model Number DCM6048S12 DCM10048S12 4. For a fitted cover version, add suffix `-C' to model number (power derates by 20% with cover fitted) 5. For full product details contact sales, or visit www.xppower.com 6. 5% minimum load required to meet all specification parameters Mechanical Details DCM60 4.00 (101.6) 1.20 (30.5) 3.75 (95.2) 0.125 (3.2) 1 2.00 (50.8) + 1.75 (44.4) Input Connector J1 Pin 1 -Vin Pin 2 +Vin J1 mates with Molex housing 43061-0003 & Molex series 5194 crimp terminals J2 2 J1 1 1.61 (41.0) - 6 0.87 (22.2) Voltage Adjust 0.12 (3.2) 0.21 (5.4) 0.14 (3.5) SMD Component Height Ground Connection through mounting holes 0.20 (5.1) 4 x 0.15 (3.9) mounting holes o0.31 (7.9) clearance top and bottom Output Connector J2 Pin Single 1 12V 2 12V 3 RTN 4 RTN 5 NC 6 NC J2 mates with Molex housing 43061-0006 & Molex series 5194 crimp terminals Input Connector J1 Pin 1 -Vin Pin 2 +Vin DCM100 4.50 (114.3) 4.25 (107.9) 0.12 (3.2) 1.20 (30.5) 1 2.25 (57.1) 2.50 (63.5) + 2 J1 J2 1 2.10 (53.3) - ACDC DCM60/100 Models and Ratings 1.29 (32.8) 12 0.12 (3.2) 0.20 (5.1) Voltage Adjust Ground Connection through mounting holes 0.20 (5.1) 0.14 (3.5) SMD Component Height 4 x 0.15 (3.9) mounting holes o0.31 (7.9) clearance top and bottom Notes 1. All dimensions in inches (mm). Tolerance .xx = 0.02 (0.50); .xxx = 0.01 (0.25) 2. Weight: DCM60: 0.3 lbs (136 g) approx. DCM100: 0.4 lbs (181 g) approx. 3. Cover kits available separately, order part number no. ECM40/60 COVER (4.49 x 2.52 x 1.52 (114 x 64 x 38.5)) for DCM60 or part no. ECM100 COVER (4.96 x 3.05 x 1.52 (126 x 77.5 x 38.5)) for DCM100. Output power derates by 20% with cover fitted. J1 mates with Molex housing 43061-0003 & Molex series 5194 crimp terminals Output Connector J2 Pin Single 1 12V 2 12V 3 12V 4 12V 5 RTN 6 RTN 7 RTN 8 RTN 9 NC 10 NC 11 NC 12 NC J2 mates with Molex housing 43061-0012 & Molex series 5194 crimp terminals Input Current Input Voltage Range Input Frequency 90-264 VAC (120-370 VDC) 47-63 Hz 115 VAC 230 VAC Earth (1) Leakage Current Output Power Output Voltage Output Current 1.8 A max 1.1 A max <1 mA 100 W +56 V 1.8 A Notes 1. Earth leakage current rated at 264 VAC/60 Hz. 2. Input is protected with internal T3.15 A, 250 V, fuse in line Model Number POE100US56 3. Output to Ground Isolation 1500 VAC POE version. 4. For full product details contact sales, or visit www.xppower.com Mechanical Details 4.00 (101.6) 4X O0.156 (3.96) mounting holes O0.312 (7.92) clearance top and bottom 0.13 (3.2) 1.26 (32.0) 0.13 (3.2) 1.25 (31.8) J2 1 1.75 (44.5) 1 2 J1 L N 2.00 (50.8) 3.75 (95.3) 0.94 (23.8) Voltage Adjust 0.20 (5.1) 0.19 (4.8) SMD Component Height 0.21 (5.3) 0.25" Faston Ground Tab Input Connector J1 Pin 1 Line Pin 2 Neutral 0.25" Faston Earth Output Connector J2 Pin 1 56V Pin 2 56V Pin 3 RTN Pin 4 RTN J1 mates with Molex housing 09-50-1031 & Molex series 5194 crimp terminals J2 mates with Molex housing 09-50-1041 & Molex series 5194 crimp terminals Notes 1. All dimensions in inches (mm). Tolerance .xx = 0.02 (0.50); .xxx = 0.01 (0.25) 2. Weight 0.35 lb (158 g) approx. Derating Curves Convectioncooled Fancooled with 10 CFM Output Power (W) Output Power (W) 100 80 60 40 20 80 60 40 20 0 0 0 10 20 30 40 50 Ambient Temp (C) 60 70 80 0 10 20 30 40 50 60 70 80 Ambient Temp (C) 27-Sept-12 ACDC POE100 Models and Ratings